2004 Pontiac Grand Am Se Sedan 4-door 2.2l on 2040-cars

Auto blog

Pontiac should come back as a performance division for GM

For decades the Pontiac brand was known as GM's performance brand. From the 1964 Pontiac GTO, to the 1967 Firebird, to the 1984 Fiero, to the 2006 Solstice Turbo, and 2009 G8 GXP, Pontiac had a reputation for building exciting cars, with bold styling and performance to back it up. When the Camaro was killed off in 2002, the Pontiac Firebird died off with it, and the last Pontiacs were built in early 2010. But with names like G3, G4, and G6, Pontiac's performance image had long faded from it's earlier glory days. My idea for Pontiac's revival would be to bring it back as a dedicated performance marque similar to Chevy's Super Sport (SS) line up of years past. First, and most obvious would be to bring back the Pontiac Firebird. Offering the entry-level model with the Camaro's 275HP turbo 4 cylinder engine, then having the Camaro SS's 455HP V8, but also offering a halo model Trans Am that is a revamped Camaro ZL-1 along with it's tire-shredding 650HP, supercharged V8 and race tuned suspension. Secondly, I would bring back the GTO. Which I would base on the current Chevy SS, but I would use the full 455-horsepower LS4 V8 (rather than the 415-hp setup that it has now). Furthermore, I would add the impressive 650-hp supercharged V8 to provide real competition to the Charger Hellcat. Importantly, I would make sure that the new GTO had bold, distinctive styling that really set it apart. I understand that purists would want any Pontiac GTO to be a two-door coupe, but I think that they could forgive that if the new GTO was an outstanding American performance car. Next, I would take the Buick Cascada convertible, add much bolder styling, swap in the Camaro's 275-hp turbo engine, and tune up the suspension to provide more performance than luxury (without being harsh). And finally I would round out the line up by using the new 2018 Traverse , but use the new, bold Pontiac design language to spice up the model's looks, tweak the engines for more power, and again provide a performance suspension that matches the model's new sporty looks. Obviously, having a high performance Pontiac model line up would steal away some sales from Chevy, Buick, and Cadillac models. But I think that it would more than make up for this by also stealing away sales from competing brands. Related Video: Image Credit: Copyright 2012 Drew Phillips / AOL Pontiac Classics brands open road

This Hoonigan mechanic's twin-turbo Trans Am is wonderful

What do you drive when you work on rally machines for a living? Probably a Subaru WRX, and that's what Gregg Hamilton had for a while until working on his car felt too much like his day job. So when he moved from New Zealand to the US to work for Ken Block (with a few stops along the way) he bought something entirely different. This is Gregg's 1979 Pontiac Firebird Trans Am. It's a throwback to another time, but it's anything but stock. It has that magic combination of a big V8 with a manual transmission and rear drive, just like the tin-top racers Gregg watched in his Kiwi youth. He bought it sight unseen from its previous owner in Alabama, and has been tinkering with it ever since. There's something about the flared wheel arches and the classic Firebird gold-striped black livery that has us smitten. Scope out the six-minute clip above from Petrolicious and see if you don't fall for Gregg's Pontiac as well.

Junkyard Gem: 1986 Pontiac Fiero 2M4

The mid-engined, plastic-bodied Pontiac Fiero two-seater caused great excitement when it hit the streets as a 1984 model, then became something of an embarrassment for GM when its design flaws became clear to the car-buying public. Still, when a V6 engine became available for 1985, followed by a fastback roof for 1986, the air of Pontiac Excitement around the Fiero lingered to a certain extent. We took a look at a discarded '86 Fiero GT with both the 2.8-liter V6 and the fastback body last year, and now we'll take a look at an example of the econo-commuter four-cylinder notchback version from the same year. Pontiac used the 2M4 designation (standing for two seats, mid-engine, four cylinders) on four-cylinder Fieros, while the six-cylinder cars were known as 2M6s. 2M4 decals went on four-banger Fieros for the 1984-1986 model years, while 2M6 decals seem to have been applied less consistently to the V6 cars of that period. During the early development period of the car that became the Fiero, the idea was that it would be a nimble sports car with a lightweight engine. Then the plan shifted, with the Fiero intended to be a gas-sipping commuter. When the car finally hit showrooms, it was a lot heavier than intended, it had a Chevy Citation front suspension in the back plus a Chevette front suspension, and its engine was the low-revving, weighty Iron Duke 2.5-liter straight-four. The Duke was about the least sports-car-appropriate four-cylinder engine The General could dredge up from his parts bins, but it was cheap and there was no shortage of production capacity. By the time the Fiero came out, the Iron Duke had been renamed the Tech 4. This one was rated at 92 horsepower and 132 pound-feet. The V6 Fieros get all the press today, but plenty of the Duked versions were sold (amazingly, the Chevrolet Camaro was available with Iron Duke power from 1982 through 1986). The emissions sticker tells us that this was a California-market car, rather than the "49-state" model the rest of the country got. California-specific emissions hardware added $99 to this car's price ($277 in 2023 dollars). While this car is a base model, the original buyer loaded it with options. The transmission is a three-speed automatic, priced at $465 (about $1,303 in 2023 dollars). A five-speed manual was standard equipment on the 1986 Fiero, though the old-fashioned four-speed manual was still available for a $50 credit ($140 now).