1997 Pontiac Firebird Trans Am Super Clean T-tops Chrome Wheels Nice! No Reserve on 2040-cars

Auto blog

Porsche Boxster Spyder to get GT3's 4.0-liter flat six?

It's been a merry-go-round the past few months, the rumormill focused on what will power the next Porsche Boxster Spyder. First came hearsay of a flat-six going into the special edition of a model line known for its turbocharged four-cylinder engines. Then came tattling that the flat-six in question was the naturally aspirated, 4.0-liter from the 911 GT3. A couple of weeks ago we wrote " we'd be surprised if Porsche packed anything other than a turbocharged flat-four under the skin." But Autocar has a new report that, indeed, a downtuned version of the 500-horsepower 4.0-liter from the GT3's rump will move to the Boxster Spyder's midsection. The Autocar piece follows a Wheels magazine article from last November, and the prediction isn't outrageous. When Car and Driver reviewed the last Boxster Spyder, it wrote, "the hand-me-down six comes from the older 911 Carrera S, not to be confused with the new turbocharged 3.0-liter flat-six that powers the refreshed 911." If we can believe a recent report from Automobile about the 992-series 911 due later this year, the same thing is happening: The 991.2-series GT3 bequeaths its powerplant to the smaller sibling, and the 992-series GT3 moves to a 3.8-liter, twin-turbo flat-six with around 550 hp. Autocar quotes Andreas Preuninger, the Porsche engineer leading the development of all of these wunderkinds, saying of the Boxster earlier this year, "Natural aspiration is one of our main USPs. ... [We] think we can achieve throttle response and immediacy a little bit better with an atmospheric high-revving engine than any kind of turbo." We'll guess that means, by inference, that the GT3 is about to age out of naturally-aspirated university. The limited-edition Boxster Spyder might carry the torch with the 4.0-liter, with output somewhere around 430 hp. The Cayman GT4 could do the same. Or, who knows, an evolution of the 375-hp, 3.8-liter flat-six in the previous Boxster Spyder might burble out of left field. We expect to see the Boxster Spyder late this year. Until then, we'll wait to see what the merry-go-round says next time the Zuffenhausen horse comes around. Related Video: Featured Gallery Porsche 718 Boxster Spyder spy shots View 13 Photos News Source: Autocar via JalopnikImage Credit: CarPix Rumormill Pontiac Convertible Luxury Special and Limited Editions Performance porsche 911 gt3

Junkyard Gem: 1986 Pontiac Fiero 2M4

The mid-engined, plastic-bodied Pontiac Fiero two-seater caused great excitement when it hit the streets as a 1984 model, then became something of an embarrassment for GM when its design flaws became clear to the car-buying public. Still, when a V6 engine became available for 1985, followed by a fastback roof for 1986, the air of Pontiac Excitement around the Fiero lingered to a certain extent. We took a look at a discarded '86 Fiero GT with both the 2.8-liter V6 and the fastback body last year, and now we'll take a look at an example of the econo-commuter four-cylinder notchback version from the same year. Pontiac used the 2M4 designation (standing for two seats, mid-engine, four cylinders) on four-cylinder Fieros, while the six-cylinder cars were known as 2M6s. 2M4 decals went on four-banger Fieros for the 1984-1986 model years, while 2M6 decals seem to have been applied less consistently to the V6 cars of that period. During the early development period of the car that became the Fiero, the idea was that it would be a nimble sports car with a lightweight engine. Then the plan shifted, with the Fiero intended to be a gas-sipping commuter. When the car finally hit showrooms, it was a lot heavier than intended, it had a Chevy Citation front suspension in the back plus a Chevette front suspension, and its engine was the low-revving, weighty Iron Duke 2.5-liter straight-four. The Duke was about the least sports-car-appropriate four-cylinder engine The General could dredge up from his parts bins, but it was cheap and there was no shortage of production capacity. By the time the Fiero came out, the Iron Duke had been renamed the Tech 4. This one was rated at 92 horsepower and 132 pound-feet. The V6 Fieros get all the press today, but plenty of the Duked versions were sold (amazingly, the Chevrolet Camaro was available with Iron Duke power from 1982 through 1986). The emissions sticker tells us that this was a California-market car, rather than the "49-state" model the rest of the country got. California-specific emissions hardware added $99 to this car's price ($277 in 2023 dollars). While this car is a base model, the original buyer loaded it with options. The transmission is a three-speed automatic, priced at $465 (about $1,303 in 2023 dollars). A five-speed manual was standard equipment on the 1986 Fiero, though the old-fashioned four-speed manual was still available for a $50 credit ($140 now).

1970 Firebird Trans-Am with front-mid-engine to be immortalized as a Hot Wheels car

Each year, the Hot Wheels Legends Tour scours the country to find the coolest real-life cars and chooses one to be made into a $1 diecast toy. Earlier this month, the search came to an end when Riley Stair's heavily modified 1970 Pontiac Firebird Trans-Am won the honors. In a normal year, the Hot Wheels Legends Tour would visit multiple cities, holding a car show where judges would select one winner for that stop. At SEMA, each city's winner would then compete for the top spot. However, due to the coronavirus pandemic, this year the contest was held virtually and globally. And since SEMA was canceled too, the finale was held on the "Jay Leno's Garage" YouTube channel with Leno, Snoop Dogg, Gabriel Iglesias, and Hot Wheels designers as judges. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. What set the Firebird apart was, for starters, its front-mid-engine layout. Its LSX V8 was pushed so far back into the firewall that one bank of exhaust headers had to flow forward before curving around the front of the engine to a side-dump. Of course, all of this was custom fabricated, like the roll cage and front tube frame, with professional-grade welds. The body was also heavily modified, flared and channeled to give it a mean stance. But it's the custom Ohlins suspension with independent rear that give it its track-ready look. Perhaps most impressively, this car, which could go toe-to-toe against (and frankly exceed many) six-figure pro builds at SEMA, was built in the side yard of Stair's parents' house. Aside from body and paint, this was a shadetree job. Stair says it took a couple of years, devoting nearly every night and weekend to transforming a rusty and dented Firebird into his dream machine. Other finalists included a Street Freak-style 1969 Corvette from Florida, cartoony 1959 Chevy Ute nicknamed the "Hulk-amino", Rocket Bunny-style Cayman, 1,000-horsepower Chevy Apache, V8-powered Mini Cooper, stanced Fiat 126 from Germany, chopped VW Brasilia from Mexico, and a race-ready 1976 Hillman Imp from the U.K. Cars were judged on creativity, authenticity, and built-not-bought spirit. Look for the Trans-Am to appear in the 2021 Hot Wheels lineup. Related Video:   Featured Gallery Hot Wheels Legends Tour 2020 View 16 Photos Toys/Games Pontiac Coupe Performance Classics