1969 Firebird on 2040-cars

Auto blog

Junkyard Gem: 1986 Pontiac Fiero 2M4

The mid-engined, plastic-bodied Pontiac Fiero two-seater caused great excitement when it hit the streets as a 1984 model, then became something of an embarrassment for GM when its design flaws became clear to the car-buying public. Still, when a V6 engine became available for 1985, followed by a fastback roof for 1986, the air of Pontiac Excitement around the Fiero lingered to a certain extent. We took a look at a discarded '86 Fiero GT with both the 2.8-liter V6 and the fastback body last year, and now we'll take a look at an example of the econo-commuter four-cylinder notchback version from the same year. Pontiac used the 2M4 designation (standing for two seats, mid-engine, four cylinders) on four-cylinder Fieros, while the six-cylinder cars were known as 2M6s. 2M4 decals went on four-banger Fieros for the 1984-1986 model years, while 2M6 decals seem to have been applied less consistently to the V6 cars of that period. During the early development period of the car that became the Fiero, the idea was that it would be a nimble sports car with a lightweight engine. Then the plan shifted, with the Fiero intended to be a gas-sipping commuter. When the car finally hit showrooms, it was a lot heavier than intended, it had a Chevy Citation front suspension in the back plus a Chevette front suspension, and its engine was the low-revving, weighty Iron Duke 2.5-liter straight-four. The Duke was about the least sports-car-appropriate four-cylinder engine The General could dredge up from his parts bins, but it was cheap and there was no shortage of production capacity. By the time the Fiero came out, the Iron Duke had been renamed the Tech 4. This one was rated at 92 horsepower and 132 pound-feet. The V6 Fieros get all the press today, but plenty of the Duked versions were sold (amazingly, the Chevrolet Camaro was available with Iron Duke power from 1982 through 1986). The emissions sticker tells us that this was a California-market car, rather than the "49-state" model the rest of the country got. California-specific emissions hardware added $99 to this car's price ($277 in 2023 dollars). While this car is a base model, the original buyer loaded it with options. The transmission is a three-speed automatic, priced at $465 (about $1,303 in 2023 dollars). A five-speed manual was standard equipment on the 1986 Fiero, though the old-fashioned four-speed manual was still available for a $50 credit ($140 now).

Watch as Hot Rod goes from El Paso to LA the hard way

There are few things simultaneously more romantic and idiotic than taking a road trip in a beaten-down heap of a car. Trust us. We know. David Freiburger and Mike Finnegan of Hot Rod Magazine fame recently undertook an epic trip from El Paso, Texas to Los Angeles with the express goal of doing so for under $1,500, including the purchase price of a vehicle, food, lodging, repairs and, most importantly, fuel. With this in mind, the duo settled on a 1972 Pontiac Catalina for a lofty $650. Hilarity ensues.
Realizing that no one actually wants a Catalina sulking around the shop, Freiburger and Finnegan put the car up for auction on eBay Motors the instant they had the title in hand. By the time they rolled into Hot Rod HQ, the vehicle sold for a little over $500.
The video is part of a new series called Roadkill that should document similar adventures. Keep your eyes peeled for more calamity-soaked clips in the near future. In the meantime, hit the jump to check it out yourself.

This massive 'Knight Rider' KITT model costs over $1,400

A new model of the famed Pontiac Firebird from the 1980s TV show Knight Rider is here, and it's massive. The shadowy flight into the dangerous world of this subscription-based kit by DeAgostini will result in a car that measures nearly two feet long, cost more than $1,400, and take you over two years to complete. For years, subscription-based model kits have been a tradition for hobbyists in Europe and Asia. Should you sign on, each week you'll receive a package in the mail that includes a few parts for the model and some literature on the subject. Usually there are additional collectibles and accessories, like a display case. The DeAgostini KITT kit, for example, begins with the hood for the first issue. The asymmetric bulged and scooped body panel comes with a several smaller body pieces and a small screwdriver. Issue two comes with the front fascia, KITT's red scanner light, and three of the six driving lights. Issue three gives you a tire, wheel and brake components for one of the four corners. And so it goes. When all is said and done, you'll receive 110 such packages over a span of so many weeks. In other words it'll take two years and one-and-a-half months to complete the black, 1:8 scale Pontiac. There are some discounted prices for the first few issues to get you hooked, but once you get settled in the regular price for each issue is ˆ10.99 ($13.36 USD). Here's a preview the 16-page pamphlet that accompanies the first issue. By the end, you should have a pretty comprehensive compendium of the Knight Rider series as well. The issues are available on newsstands, but subscribers get additional gifts — two 1:43 scale models, one of KITT and one of his nemesis KARR. And for an additional ˆ1.00 per issue, you'll receive an acrylic display case. As for the Knight Industries Two Thousand itself, the car appears to be incredibly detailed. As depicted on the DeAgostini website, the hood, doors, trunk and T-top roof panels all open. The red scanner lights up, the rear license plate rotates for three options, and there even seems to be a watch that commands the model to speak some of KITT's catch phrases. Knight Rider — or Supercar as it was called in Italy — told the episodic story of a former police officer, Michael Knight, who fought crime with his A.I.-powered car. As such, the TV car and the the model have a heavily computerized (by 1980s standards) dashboard and yoke steering wheel.