Frame Off Restored Bonneville Convertible 389 V8 on 2040-cars

Auto blog

Junkyard Gem: 1988 Pontiac 6000 LE Safari Wagon

The Detroit station wagon was fast losing sales to minivans and trucks as the decade of the 1980s progressed, but Pontiac shoppers still had plenty of choices as late as the 1988 model year. A visit to a Pontiac dealership in 1988 would have presented you with three sizes of wagon, from the little Sunbird through the midsize 6000 and up to the mighty Parisienne-based Safari. Today's Junkyard Gem is a luxed-up 6000 LE, complete with "wood" paneling, found in a car graveyard in Fargo, North Dakota. Confusingly, the "Safari" name in 1988 was used by Pontiac to designate both a specific model — the wagon version of the Parisienne/Bonneville— and as the traditional Pontiac designation for a station wagon. That meant that the wagon we're looking at now was a Safari but not the Safari in the 1988 Pontiac universe. The 6000 lived on the GM A-Body platform, as the Pontiac-badged version of the Chevrolet Celebrity. Production ran from the 1982 through 1991 model years, with the A-Body Buick Century surviving all the way through 1996. The LE trim level came between the base 6000 and the gloriously complex 6000 STE (which wasn't available in wagon form, sadly). I visited this yard in Fargo after judging at the Minneapolis 500 24 Hours of Lemons in Brainerd, Minnesota, last fall. Up to that point, I had visited 47 of the Lower 48 United States, with just North Dakota remaining, so I made a point of doing a Fargo detour in order to check that state off my list. I'm pleased that I found such a good example of the 1982-1996 GM A-Body in this yard, because the most famous of all the A-Bodies is the 1987 Oldsmobile Cutlass Ciera driven to Brainerd by the inept Fargo-based kidnappers in the film "Fargo." This Minnesota-plated 6000 had some rust, but just negligible levels by Upper Midwestern standards on a 31-year-old car. The interior looked very good, with the original owner's manual still inside. The 6000 LE boasted "redesigned contoured seats and London/Empress fabric," which sounds pretty swanky. Something less swanky lives under the hood: an Iron Duke 2.5-liter pushrod four-cylinder engine, known as the Tech 4 by 1988. The Iron Duke was, at heart, one cylinder bank of the not-quite-renowned Pontiac 301-cubic-inch V8; while fairly rugged, the Duke ran rough (typical of large-displacement straight-four engines) and made just 98 horsepower in this application. Pontiac offered a couple of optional V6s in the 6000 in 1988, but no Quad 4.

Junkyard Gem: 1986 Pontiac Fiero GT

If you like affordable, mid-engined two-seaters, the 1980s were your decade. Fiat (and, a bit later, Bertone) offered the X1/9, Toyota sold MR2s, and even General Motors got into the act by creating the Fiero. Available from the 1984 through 1988 model years, the Pontiac Fiero showed plenty of promise but ended up being mostly disappointing, in some ways echoing the career of the Chevy Corvair of a couple of decades earlier. Today's Junkyard Gem is a once-spiffy 1986 Fiero GT, found in a self-service yard near Denver, Colorado. After a long and painful development period stretching all the way back to John DeLorean's XP-833 Banshee (which ended up being a major influence behind the original Opel GT), the Fiero finally debuted in 1983 as a 1984 model. The top-of-the-model-range GT appeared the following year. The Fiero was built as a notchback coupe and as a fastback, with all the GTs being the latter type. I couldn't get the engine lid open, but this car would have left the assembly line (in Pontiac, Michigan) with a 2.8-liter V6 rated at 140 horsepower. This car has a five-speed manual transmission, making it a credible rival for Toyota's MR2.  The 1986 MR2 was less powerful than the Fiero GT (112 horsepower versus 140), but also scaled in significantly lighter (2,459 pounds against the Pontiac's 2,780 pounds). The MR2 also cost less, priced at $11,298 while the Fiero GT cost $12,875 (that's about $30,540 and $34,805, respectively, in inflation-adjusted 2022 dollars). Meanwhile, the $6,998 Honda Civic CRX two-seater lured away many potential Fiero buyers despite being a front-engined/front-wheel-drive car, and the $7,186 Ford EXP/Mercury LN7 also put a dent in Fiero sales. I can't find a price for the 1986 Bertone X1/9, but it cost a hard-to-believe $13,990 in 1984. GM still was using five-digit odometers in many vehicles by the middle 1980s, but this Fiero has a six-digit unit and thus we can see that it nearly achieved 150,000 miles during its driving career. The 1984-1987 Fiero suffered from a parts-bin suspension design, with the front suspension borrowed from the Chevrolet Chevette and the entire rear transaxle/suspension assembly lifted from the front end of the Chevrolet Citation. For the 1988 model year, GM finally spent the money to design an improved Fiero-specific suspension … and then promptly put a halt to production.

2020 Porsche 911 Speedster spied with an angry driver

Porsche gave us details and showed us a concept of the 911 Speedster at the Paris Motor Show. Today, we bring you spy shots of what appears to be the production version of that concept with a few changes on board. They're rather minimal modifications, but the Speedster's driver appears especially angry with our spy photographer as he extends his middle finger directly toward the camera. Sorry, not sorry, Mr. Test Driver. Public testing of pre-production cars always comes with photo risks, and Porsches tend to attract more attention than others. You'll notice what appears to be a Cayenne Coupe prototype we've previously spotted running around with the 911. The Speedster Concept we saw in Paris had epic retro mirrors and fuel cap on the front hood, but both those design touches are absent from this pre-production car. It's tougher to see, but we lost the vents in between the two humps, as well. Everything else appears to have made it to production-spec. We can't say we're surprised these concept car features probably won't show up on the production car, but it is a tad deflating. You'll notice the Speedster is based-off the 991.2 generation of 911 and not the new 992. Porsche did a similar thing when the 997 generation was coming to an end with a Speedster model paying tribute to that car's life. The chassis is said to utilize parts from the 911 GT3, and the wonderful naturally aspirated flat-six engine gets carried over from that car, too. Porsche didn't specify if power will be exactly the same as the GT3, but we'll be expecting about 500 horsepower and a 9,000 rpm redline. We were told the six-speed manual would be offered on the Speedster in Paris, too. Let's just say that we strongly approve of that combination. Production will be limited to only 1,948 cars and begin in the first half of this year. We'll expect a reveal with a full spec breakdown soon, possibly for the upcoming Geneva Motor Show. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.