2009 Pontiac Vibe Gt Wagon 4-door 2.4l on 2040-cars

Auto blog

'We're not a hedge fund': Porsche plans to curtail speculators and flippers

A sizable number of speculators view cars as an investment. Rare or unusual models are quickly snapped up and either parked for years or flipped for a profit. Cars from automakers like Porsche and Ferrari are more prone than others, and at least some people behind these models are getting a bit tired of it. While it's difficult to police what goes on after you sell a car, Porsche has some plans that might curtail the problem before it starts. Andreas Preuninger, the head of GT road-car development and the man behind the new 911 GT3, spoke to Car and Driver at a recent event. "I personally like to see my cars being used," he said. "That's what we build them for. They are just too good to be left to stand and collect dust." One recent example of this rampant speculation is the 911 R. While the special manual-only model sold for $185,950 when new, used versions were selling for nearly $1.3 million just months after it went on sale. While the car is a masterpiece and an instant classic, a good number will be parked and simply used as art and not the rolling testaments to the man/machine interface they were intended to be. The concern over valuations has become so fierce that some owners are upset that Porsche is offering the new 911 GT3 with a manual transmission, fearing that it may hurt the value of the 911 R. "When I said we're not a hedge fund, I'm talking to those people who are yelling at us for offering the manual transmission similar to the R," Preuninger said. "But if there are people wanting to buy cars like that, then as a company we should try to fulfill that, to meet that demand." It seems Porsche is keeping a close eye on who is flipping cars. Since there is often far more demand than supply with certain models, the German automaker has a name for every car before it's built. Buyers with bad reputations might not even make the wait list. Related Video:

Junkyard Gem: 1986 Pontiac Sunbird Sedan

The J-Body platform was a giant seller for GM, staying in production from the first 1981 Chevrolet Cavalier all the way through that final 2005 Pontiac Sunfire. Outside of North America, Opels and Daewoos and Isuzus and Holdens and Vauxhalls and even Toyotas flew the J flag, and better than ten million rolled out of showrooms during that quarter-century. In the United States, Chevrolet, Oldsmobile, Pontiac, Buick, and Cadillac each sold J-Bodies. Of those, the Pontiac Sunbird often had the sportiest image, more cavalier than even the Cavalier Z24. I've documented a discarded Sunbird Turbo in the past, and now here's a bread-and-butter Sunbird sedan from the same era. The Sunbird name began its life in 1976 on the Pontiac-badged version of the rear-wheel-drive Buick Skyhawk, itself based on the Chevy Vega. The first J-Body Pontiacs had J2000 badges, then 2000 badges, then 2000 Sunbird badges, until finally the pure non-2000 Sunbird appeared for the 1985 model year. I remain disappointed that the 2000 name didn't survive into our current century, because we could have had a 2000 Pontiac 2000, or just the "2000 2000" for short. The base engine in the '86 Sunbird was this SOHC 1.8-liter four of Brazilian origin, rated at 84 horsepower. Originally developed by Opel in the late 1970s, this engine family went into cars built all across the sprawling GM empire. 84 horsepower doesn't sound like much— and it wasn't much, even by 1986 standards— but at least the original buyer of this car had the smarts to get the five-speed manual transmission. This car weighed just 2,336 pounds, a good 500 pounds lighter than the current Chevy Sonic, so performance with the manual transmission was tolerable. The '86 Sunbird's interior was much nicer than those in its Cavalier siblings, though nowhere near the Cadillac Cimarron's reading on the Plush-O-Meter. An AM/FM/cassette stereo with auto reverse was serious audio hardware in a cheap car during the middle 1980s, when even a scratchy factory AM-only radio cost the equivalent of several hundred 2020 bucks. The price tag of this car started at $7,495, or about $17,500 in 2020 dollars. The cheapest possible Cavalier sedan went for $6,888 in 1986, but a zero-option base '86 Cavalier would make you think you'd been transported to the Soviet Union every time you slunk into its harsh confines. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...