1969 Pontiac Gto Convertible on 2040-cars

Auto blog

Junkyard Gem: 1986 Pontiac Fiero 2M4

The mid-engined, plastic-bodied Pontiac Fiero two-seater caused great excitement when it hit the streets as a 1984 model, then became something of an embarrassment for GM when its design flaws became clear to the car-buying public. Still, when a V6 engine became available for 1985, followed by a fastback roof for 1986, the air of Pontiac Excitement around the Fiero lingered to a certain extent. We took a look at a discarded '86 Fiero GT with both the 2.8-liter V6 and the fastback body last year, and now we'll take a look at an example of the econo-commuter four-cylinder notchback version from the same year. Pontiac used the 2M4 designation (standing for two seats, mid-engine, four cylinders) on four-cylinder Fieros, while the six-cylinder cars were known as 2M6s. 2M4 decals went on four-banger Fieros for the 1984-1986 model years, while 2M6 decals seem to have been applied less consistently to the V6 cars of that period. During the early development period of the car that became the Fiero, the idea was that it would be a nimble sports car with a lightweight engine. Then the plan shifted, with the Fiero intended to be a gas-sipping commuter. When the car finally hit showrooms, it was a lot heavier than intended, it had a Chevy Citation front suspension in the back plus a Chevette front suspension, and its engine was the low-revving, weighty Iron Duke 2.5-liter straight-four. The Duke was about the least sports-car-appropriate four-cylinder engine The General could dredge up from his parts bins, but it was cheap and there was no shortage of production capacity. By the time the Fiero came out, the Iron Duke had been renamed the Tech 4. This one was rated at 92 horsepower and 132 pound-feet. The V6 Fieros get all the press today, but plenty of the Duked versions were sold (amazingly, the Chevrolet Camaro was available with Iron Duke power from 1982 through 1986). The emissions sticker tells us that this was a California-market car, rather than the "49-state" model the rest of the country got. California-specific emissions hardware added $99 to this car's price ($277 in 2023 dollars). While this car is a base model, the original buyer loaded it with options. The transmission is a three-speed automatic, priced at $465 (about $1,303 in 2023 dollars). A five-speed manual was standard equipment on the 1986 Fiero, though the old-fashioned four-speed manual was still available for a $50 credit ($140 now).

Junkyard Gem: 1980 Pontiac Grand Prix LJ

A couple of years before John DeLorean and his team at the Pontiac Division created the GTO by pasting a big engine and some gingerbread on the LeMans, they created a rakish, powerful coupe based on the staid full-size Catalina. This was the 1962 Pontiac Grand Prix, which sold like crazy and escalated the personal luxury coupe war already brewing in Detroit. Starting with the 1969 model year, the Grand Prix switched to a smaller chassis (shared the following year with the new Chevrolet Monte Carlo), and all subsequent rear-wheel-drive Grand Prix (that is, through 1987) remained siblings of the Monte. Today's Junkyard Gem is a rare 1980 Grand Prix LJ, found in a self-service yard near Reno, Nevada. Sure, a fresh round of Middle East conflict had put a kink in America's fuel hose in 1979, leading to gas lines and a general sense of malaise, but at least the new Grand Prix looked extra sharp for 1980. The LJ package came with all sorts of appearance and comfort goodies, including these "luxury seats with loose-pillow design in New Florentine Cloth." A Pontiac Phoenix LJ was available as well. These seats must have been very comfortable when new. Who needed a Cadillac when Pontiac would sell you this car at a base MSRP of just $7,000 (about $26,704 in 2023 dollars)? That price was what you paid if you were willing to get the base 3.8-liter Buick V6, though. To get a V8 engine with four-barrel carburetor, you had to pay extra. If you did pay the extra for a V8, which one you got depended on which state you lived in; in California, you got this 305-cubic-inch (5.0-liter Chevrolet small-block), and in the other 49 states you got a 301-cubic-inch (4.9-liter) Pontiac. The 305 was rated at 150 horsepower with 230 pound-feet; the 301 made 140hp and 240 lb-ft. This car was originally bought in California (the state line is about ten miles away from its final parking spot), so it has the Chevy engine. The V8 added $195 (plus $250 for the California-only emissions system) to the out-the-door price of the car, or about $1,316 in 2023 dollars. Outside of California, a 4.3-liter Chevy V6 was available for just 80 additional bucks ($305 now). All 1980 Grand Prix got a three-speed automatic transmission as standard equipment, with no manual available from the factory. This car has the optional air conditioning, which cost $601 ($2,293 after inflation). This is the "Custom Sport" steering wheel, which was standard on the LJ. The tilt option cost $81 ($309 today).

This massive 'Knight Rider' KITT model costs over $1,400

A new model of the famed Pontiac Firebird from the 1980s TV show Knight Rider is here, and it's massive. The shadowy flight into the dangerous world of this subscription-based kit by DeAgostini will result in a car that measures nearly two feet long, cost more than $1,400, and take you over two years to complete. For years, subscription-based model kits have been a tradition for hobbyists in Europe and Asia. Should you sign on, each week you'll receive a package in the mail that includes a few parts for the model and some literature on the subject. Usually there are additional collectibles and accessories, like a display case. The DeAgostini KITT kit, for example, begins with the hood for the first issue. The asymmetric bulged and scooped body panel comes with a several smaller body pieces and a small screwdriver. Issue two comes with the front fascia, KITT's red scanner light, and three of the six driving lights. Issue three gives you a tire, wheel and brake components for one of the four corners. And so it goes. When all is said and done, you'll receive 110 such packages over a span of so many weeks. In other words it'll take two years and one-and-a-half months to complete the black, 1:8 scale Pontiac. There are some discounted prices for the first few issues to get you hooked, but once you get settled in the regular price for each issue is ˆ10.99 ($13.36 USD). Here's a preview the 16-page pamphlet that accompanies the first issue. By the end, you should have a pretty comprehensive compendium of the Knight Rider series as well. The issues are available on newsstands, but subscribers get additional gifts — two 1:43 scale models, one of KITT and one of his nemesis KARR. And for an additional ˆ1.00 per issue, you'll receive an acrylic display case. As for the Knight Industries Two Thousand itself, the car appears to be incredibly detailed. As depicted on the DeAgostini website, the hood, doors, trunk and T-top roof panels all open. The red scanner lights up, the rear license plate rotates for three options, and there even seems to be a watch that commands the model to speak some of KITT's catch phrases. Knight Rider — or Supercar as it was called in Italy — told the episodic story of a former police officer, Michael Knight, who fought crime with his A.I.-powered car. As such, the TV car and the the model have a heavily computerized (by 1980s standards) dashboard and yoke steering wheel.