Pontiac G8 Gt on 2040-cars

Auto blog

GM Recalling Another 2.7 Million Vehicles In Five Separate Campaigns

The recalls keep rolling in from General Motors, evidently keen to avoid repeating the mistakes of the ignition-switch debacle and clean house. This time they're all coming at once, with five separate recalls announced together covering approximately 2.7 million vehicles. The largest of the five actions involves over 2.4 million units of the previous-generation Chevrolet Malibu and Malibu Maxx, Pontiac G6 and Saturn Aura in order to fix brake light wiring harness, which have been found to be susceptible to corrosion. The recall is separate from the 56k Aura sedans which GM recently recalled over faulty shift cables, not to mention the previous massive recall of 1.3 million vehicles – some of them the same models – but appears to have resulted from the National Highway Traffic Safety Administration investigation that started with the G6 almost a year ago. The second-largest campaign involves the 2014 Chevy Malibu, specifically those fitted with GM's 2.5-liter engine and stop/start system, approximately 140,000 examples of which has been found to have problematic brakes. The issue does not appear to be connected to the recall of 8k Malibu and Buick LaCrosse sedans (also involving brake woes) which we reported upon last week. Four crashes have been reported in such models, but GM admits it's not yet clear if the problem was a contributing factor in the accidents. A further 112k Corvette models from the 2005-2007 model years are being called in for problems with their low-beam headlamps resulting from a flexing relay control circuit wire that's not meant to bend. GM says it is "aware of several hundred complaints" about this issue, but notes that there have been no reports of related accidents. In addition, over 19k examples of Cadillac CTS from the 2013 and 2014 model years are being recalled over windshield wipers that might not work after a jump start. Finally, GM is also bringing in 477 examples of its 2014 Chevy Silverado, Tahoe and GMC Sierra (though not the Yukon) to fix a problem with a tie rod in its steering rack. As ever, all recall repairs will be performed free of charge, and GM is now estimating that recall-related actions this quarter will result in an estimated $200-million charge against its second-quarter earnings. Read the full announcement from GM below for further details.

Junkyard Gem: 1986 Pontiac Sunbird Sedan

The J-Body platform was a giant seller for GM, staying in production from the first 1981 Chevrolet Cavalier all the way through that final 2005 Pontiac Sunfire. Outside of North America, Opels and Daewoos and Isuzus and Holdens and Vauxhalls and even Toyotas flew the J flag, and better than ten million rolled out of showrooms during that quarter-century. In the United States, Chevrolet, Oldsmobile, Pontiac, Buick, and Cadillac each sold J-Bodies. Of those, the Pontiac Sunbird often had the sportiest image, more cavalier than even the Cavalier Z24. I've documented a discarded Sunbird Turbo in the past, and now here's a bread-and-butter Sunbird sedan from the same era. The Sunbird name began its life in 1976 on the Pontiac-badged version of the rear-wheel-drive Buick Skyhawk, itself based on the Chevy Vega. The first J-Body Pontiacs had J2000 badges, then 2000 badges, then 2000 Sunbird badges, until finally the pure non-2000 Sunbird appeared for the 1985 model year. I remain disappointed that the 2000 name didn't survive into our current century, because we could have had a 2000 Pontiac 2000, or just the "2000 2000" for short. The base engine in the '86 Sunbird was this SOHC 1.8-liter four of Brazilian origin, rated at 84 horsepower. Originally developed by Opel in the late 1970s, this engine family went into cars built all across the sprawling GM empire. 84 horsepower doesn't sound like much— and it wasn't much, even by 1986 standards— but at least the original buyer of this car had the smarts to get the five-speed manual transmission. This car weighed just 2,336 pounds, a good 500 pounds lighter than the current Chevy Sonic, so performance with the manual transmission was tolerable. The '86 Sunbird's interior was much nicer than those in its Cavalier siblings, though nowhere near the Cadillac Cimarron's reading on the Plush-O-Meter. An AM/FM/cassette stereo with auto reverse was serious audio hardware in a cheap car during the middle 1980s, when even a scratchy factory AM-only radio cost the equivalent of several hundred 2020 bucks. The price tag of this car started at $7,495, or about $17,500 in 2020 dollars. The cheapest possible Cavalier sedan went for $6,888 in 1986, but a zero-option base '86 Cavalier would make you think you'd been transported to the Soviet Union every time you slunk into its harsh confines. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...