1968 Pontiac Firebird on 2040-cars

Auto blog

How to turn a Pontiac Fiero into a trackday car

Imagine hitting the track in a mid-engine, rear-wheel drive sports coupe that's affordable and has pretty good parts availability. It might sound like a pipe dream, but it's actually quite possible, if you're willing to think a little outside the box. The Pontiac Fiero is out there just waiting for a little work to turn it into a competent racing machine.
Think about it for a second. Of course, we would all like to be snaking through the curves in something exotic, but what happens when you crash or something breaks? The bills are going to mount up quickly. However, if you ball up a Fiero at the track, as long as you're not hurt, then it's not a huge tragedy.
That's basically the story of Steven Snyder in a new video from Drive starring Matt Farah. Snyder wanted to go to the track cheaply and ended up with an awesome little Fiero with a huge wing and a claimed 220 horsepower at the wheels thanks to a V6 from a Chevrolet Lumina. Check out the video to see how this pint-size Pontiac performs.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...

GM recalling 1.4 million older vehicles for oil leak fire risk

General Motors is recalling 1,411,332 older vehicles with its 3.8-liter V6 yet again due to a fire risk. Specifically, there are 1,283,340 of them in the US, and the affected models are the: 1997-2004 Pontiac Grand Prix 2000-2004 Chevrolet Impala 1998-1999 Chevrolet Lumina 1998-2004 Chevrolet Monte Carlo 1998-1999 Oldsmobile Intrigue 1997- 2004 Buick Regal The fault with these vehicles is that oil can drip onto the hot exhaust manifold during hard braking, which can potentially cause of fire. In the last six years, there have 19 reported minor injuries from this problem but no crashes or fatalities, according to the company. Spokesperson Alan Adler also told Autoblog: "GM has reports of 1,345 fires in vehicles that were repaired under two previous recalls for this issue." At this time, GM is still developing a remedy for the problem. According to Adler, the company advised owners to park these vehicles outside for the previous recalls. "The cars can be safely driven. In cases where a customer reported an engine fire while driving, smoke was reported, which would be an indication of a malfunction," he said. This is GM's fourth recall for this problem since 2008, according to The Detroit News. At one point it was believed that aging valve cover gaskets allowed the oil to leak out and drip onto the manifold. A campaign in 2009 covered nearly 1.5 million of these models through the 2003 model year for the same issue. At the time, dealers installed new spark plug wire retainers as a fix. Related Video: GM Statement: General Motors is recalling 1,283,340 older sedans and coupes in the U.S. from the 1997 to 2004 model years because drops of oil may be deposited on the hot exhaust manifold through hard braking, which can cause engine compartment fires. GM is working on a remedy. The company is aware of post-repair fires in some vehicles but no crashes or fatalities. There have been 19 reported minor injuries over the last six years. These vehicles with 3.8-liter V6 3800 engines are affected: 1997-2004 Pontiac Grand Prix, 2000-2004 Chevrolet Impala, 1998-1999 Chevrolet Lumina and 1998-2004 Chevrolet Monte Carlo, 1998-1999 Oldsmobile Intrigue and 1997-2004 Buick Regal. Including Canada, Mexico and exports, the total population is 1,411,332.