1968 Pontiac Firebird on 2040-cars

Auto blog

Junkyard Gem: 1988 Pontiac 6000 LE Safari Wagon

The Detroit station wagon was fast losing sales to minivans and trucks as the decade of the 1980s progressed, but Pontiac shoppers still had plenty of choices as late as the 1988 model year. A visit to a Pontiac dealership in 1988 would have presented you with three sizes of wagon, from the little Sunbird through the midsize 6000 and up to the mighty Parisienne-based Safari. Today's Junkyard Gem is a luxed-up 6000 LE, complete with "wood" paneling, found in a car graveyard in Fargo, North Dakota. Confusingly, the "Safari" name in 1988 was used by Pontiac to designate both a specific model — the wagon version of the Parisienne/Bonneville— and as the traditional Pontiac designation for a station wagon. That meant that the wagon we're looking at now was a Safari but not the Safari in the 1988 Pontiac universe. The 6000 lived on the GM A-Body platform, as the Pontiac-badged version of the Chevrolet Celebrity. Production ran from the 1982 through 1991 model years, with the A-Body Buick Century surviving all the way through 1996. The LE trim level came between the base 6000 and the gloriously complex 6000 STE (which wasn't available in wagon form, sadly). I visited this yard in Fargo after judging at the Minneapolis 500 24 Hours of Lemons in Brainerd, Minnesota, last fall. Up to that point, I had visited 47 of the Lower 48 United States, with just North Dakota remaining, so I made a point of doing a Fargo detour in order to check that state off my list. I'm pleased that I found such a good example of the 1982-1996 GM A-Body in this yard, because the most famous of all the A-Bodies is the 1987 Oldsmobile Cutlass Ciera driven to Brainerd by the inept Fargo-based kidnappers in the film "Fargo." This Minnesota-plated 6000 had some rust, but just negligible levels by Upper Midwestern standards on a 31-year-old car. The interior looked very good, with the original owner's manual still inside. The 6000 LE boasted "redesigned contoured seats and London/Empress fabric," which sounds pretty swanky. Something less swanky lives under the hood: an Iron Duke 2.5-liter pushrod four-cylinder engine, known as the Tech 4 by 1988. The Iron Duke was, at heart, one cylinder bank of the not-quite-renowned Pontiac 301-cubic-inch V8; while fairly rugged, the Duke ran rough (typical of large-displacement straight-four engines) and made just 98 horsepower in this application. Pontiac offered a couple of optional V6s in the 6000 in 1988, but no Quad 4.

Junkyard Gem: 1989 Pontiac 6000 STE AWD

During the middle to late 1980s, General Motors made a big push to grab back some of the sales swiped by makers of European luxury machinery during the previous decade. Around the top of the prestige pyramid, there was the Turin/Hamtramck-built Cadillac Allante taking aim at the Mercedes-Benz 560SEC and the super high-tech Buick Reatta trying to seduce away BMW and Jaguar shoppers; even the Riviera offered a futuristic touchscreen computer sorely lacking in anything out of Stuttgart or Bavaria. The General had a plan to take on the smaller German sporty sedans, too, and Pontiac of the "We Build Excitement" era offered a midsize sedan packed with modern hardware at a great price: the 6000 STE. Here's one of the rarest 6000 STEs of them all, an all-wheel-drive-equipped '89 found in a Denver-area yard last week. Any 6000 STE is extremely hard to find today; when I wrote about a front-wheel-drive 1987 6000 STE back in 2018, desperate owners of these cars filled my inbox with requests — sometimes demands —  for parts that continue to this day. Many of them pleaded with me to help them find an all-wheel-drive version, and now I have managed to find one at Colorado Auto & Parts in Englewood, just south of Denver (in fact, the same yard at which I shot the '87). You may recall CAP as the old-school yard whose owners built the amazing airplane-engined 1939 Plymouth pickup a few years back.  The all-wheel-drive system on the 6000 STE was introduced for the 1988 model year, and it became standard equipment on the 1989 STE. At this time, the automotive industry had taken note of the success of the idiot-proof all-wheel-drive systems offered by AMC and Audi/Volkswagen; Toyota began selling Americans all-wheel-drive Camrys, Celicas, and Corollas, while Ford offered the Tempo and Topaz with optional AWD and Subaru was just beginning to make the switch from manually-selected four-wheel-drive to genuine all-wheel-drive around that time (it took a few more years for everyone to standardize on the 4WD/AWD terminology we use today, though). The 6000 STE AWD was intended to compete with such all-wheel-drive-equipped sedans as the Audi 80 ($23,610), Audi 90 ($28,840), and BMW 325iX ($30,750); its $22,599 price tag (about $50,700 in 2021 dollars) certainly made it seem like a bargain compared to those cars. In addition to the all-wheel-drive system, 1989 6000 STE owners got a digital instrument panel and more switches and buttons than the Space Shuttle.

GM reintroduces Tripower name in the worst way possible

The story of General Motors' use of the Tripower moniker begins way back in 1957, when Semon E. "Bunkie" Knudsen, then General Manager of GM's Pontiac division, directed his engineers to inject more performance into his brand's line of V8-powered automobiles. Fuel injection was an option, but hot rodders flocked instead to Tri-Power (marketed way back when with a hyphen), which grafted a trio of two-barrel Rochester carburetors onto a single intake manifold. A legend was born. And that legend was born of performance. At idle and when full power wasn't required, Pontiac's Tri-Power system used just the middle carburetor, which helped make the setup easier to tune. Depending on the year and model, either a vacuum system or a mechanical linkage opened up the two outer carbs, thereby switching from two barrels to six, and allowing the engine to take in more fuel and air. And it was an easy marketing win – six barrels is better than four barrels, right? Because performance! So, when news filtered in that GM has resurrected the Tripower name, those of us who grew up attending classic car shows and wrenching on old Pontiacs did a double-take. And then we all collectively sighed. Turns out that today's Tripower refers to a trio of fuel-saving measures that include cylinder deactivation, active thermal management, and intake valve lift control, according to Automotive News. And, at least for now, it applies to GM's line of fullsize trucks powered by a 2.7-liter turbocharged four-cylinder engine. We're all for saving fuel whenever possible. And we have zero say in how any automaker chooses to market its products and technologies. But, we'll offer our two cents anyway: Relaunching a storied name from the past is fine. Relaunching a storied name from the past while completely overlooking the reasons the name got famous in the first place is only going to irritate the people who remember the name in the first place. Couldn't they just call this new technology package something else? Related Video: News Source: Automotive NewsImage Credit: Getty Green Marketing/Advertising Chevrolet GM Pontiac Automotive History Truck chevrolet silverado