1966 Pontiac Bonneville on 2040-cars

Auto blog

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video:

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...

Porsche Sports Car Together Fest is a labor of many Porsche loves

Over Labor Day Weekend, Porsche held its second annual Sports Car Together Fest (SCTF) at the Indianapolis Motor Speedway. We happened to be nearby, so we swung by to check out an event we’d never heard of until a few weeks before. Reading about it on Porsche's U.S. web site made us think it would be something like Rennsport Reunion for the Midwest. Turns out SCTF is just as much of a different kind of fun. The fest Tom MooreÂ’s the man behind Dark Horse Motorsports, the motorsport consultant for Porsche Cars North America (PCNA) PR. "People love Rennsport Reunion, but thatÂ’s every three to four years," he explained. “We wanted to gather people on those off years, and we didn't want to just do a mini Rennsport, because thatÂ’s its own thing. WeÂ’ve maintained the motorsport history at Rennsport. Here [at SCTF], we're doing the current look at what Porsche racing is for." In this case, that means gathering what Moore called "our Porsche motorsport pyramid." ThatÂ’s the range of enthusiast drivers from novice to hotshoes trying to get to top-tier endurance racing, "[starting] with the progression from Porsche Club of America track days up to the top of the ladder of one-make racing in North America," the Carrera Cup North America, a series made up of nothing but the latest 500-horsepower 911 GT3 Cup cars.  The three days of racing action allowed almost any kind of Porsche owner interested in clipping apexes to compete around an Indianapolis Motor Speedway layout tweaked with an infield section. This year, that included ex-NASCAR star Jeff Gordon, coming out of retirement to reunite with his longtime NASCAR crew chief Ray Evernham for the top-class Cup races.  Evernham told us Gordon hasnÂ’t raced in five years and he hasnÂ’t been a crew chief in 22. On very short practice, Gordon finished in 14th in the Pro Class in the first Carrera Cup race of the weekend driving the #24 Hendrick Performance Group Porsche, and 11th in the second race. Afterward, he said, "I made a pass on the white flag lap. That made my whole weekend Â… I must say that yesterday, I thought ‘man, I am getting beat out hereÂ’ and I donÂ’t like that. If I am going to be in an environment like this, I want to be competitive. But today turned the corner for me. So, I hope I get to do another one day."  When we strolled the paddock after the event, exposed sheet metal proved "Rubbing is racing" is a thing in the Carrera Cup as well as NASCAR.