2008 Nissan Sentra Se-r Spec V Sedan 4-door 2.5l 6-speed Silver on 2040-cars

Auto blog

Nissan recalling GT-R, Infiniti crossovers over steering column issue

Nissan has discovered a problem with the steering column on some of its higher-end all-wheel-drive vehicles from a few years back, and has issued a recall in conjunction with the National Highway Traffic Safety Administration to address the issue. The issue revolves around the outer tube on the steering column, which may not be perfectly round. That would put extra stress on the upper steering bearing, which could cause it to fracture, disabling the car's steering ability and potentially leading to a crash. The problem affects Nissan's flagship GT-R supercar – specifically 2009 models manufactured between March 14, 2007, and April 25, 2008) as well as an array of Infiniti crossovers: namely the 2008 EX35 and the 2008-09 FX35 and FX45. In the case of the luxury crossovers, Infiniti dealers are being instructed to replace just the steering shaft, but Nissan dealers will have to replace the entire steering column assembly on the GT-R. All told, the recall is estimated to encompass 16,973 vehicles across the United States. RECALL Subject : Steering Column Tube may be Out of Round Report Receipt Date: FEB 02, 2015 NHTSA Campaign Number: 15V054000 Component(s): STEERING Potential Number of Units Affected: 16,973 Manufacturer: Nissan North America, Inc. SUMMARY: Nissan North America, Inc. (Nissan) is recalling certain model year 2008 Infiniti EX35 vehicles manufactured June 29, 2007, to April 25, 2008, 2009 Infiniti FX35 and FX45 vehicles manufactured October 31, 2007, to April 16, 2008, and 2009 Nissan GT-R vehicles manufactured March 14, 2007, to April 25, 2008. The steering column outer tube may not be round, resulting in extra stress being applied to the upper steering bearing. This stress may cause the bearing retainer to fracture, creating extra play in the steering wheel or a possible loss of steering. CONSEQUENCE: Extra play in the steering wheel or a loss of steering may increase the risk of a crash. REMEDY: Nissan will notify owners, and dealers will replace the steering shaft on the Infiniti EX35, FX35, and FX45 vehicles, and will replace the steering column assembly on the Nissan GT-R vehicles, free of charge. The manufacturer has not yet provided a notification schedule. Infiniti owners may contact customer service at 1-800-662-6200. Nissan owners may contact the GT-R hotline at 1-866-668-1487.

2014 Nissan Rogue gives us our best look yet

Nissan is reportedly fast-tracking the development of its next-generation Rogue crossover, and judging by this latest set of spy shots, the new small CUV is coming along quite nicely.
To no one's surprise, the new Rogue takes the vast majority of its design cues from the Hi-Cross concept that debuted at the 2012 Geneva Motor Show, and specific elements like the pronounced wheel arches, angular nose, flat roofline and more stylized taillmaps should make for a Rogue that's far more style conscious than the model it replaces. This stronger design language should help the new Rogue to better stand out in the sea of Honda CR-V and Toyota RAV4 rivals.
There's far more to the new Rogue than just some swoopier sheetmetal, though. This crossover is expected to be the first vehicle to ride on the Renault-Nissan CMF (Common Module Family) platform, an architecture flexible enough to eventually support a host of new products. As we reported earlier, the next Rogue will be built in the US, in Tennessee.

A look inside Infiniti's variable-compression engine

We're sympathetic to anyone who had trouble understanding what's going on with Infiniti's new variable-compression engine. While we got a full tech briefing on the novel VC-Turbo back in August, the visual aids were lacking. The cutaway engine Infiniti brought to the Paris show fixes all of that. You can thank the little green and pink lines on the cutaway for making the whole idea a little more clear. Click through the gallery to see two lines – one green and one pink – that represent the different strokes allowing for different compression ratios. Remember, the compression ratio is the amount of volume in the cylinder on intake compared to the amount at the end of the compression stroke. Leave more room at the end and you lower that ratio. The length of the stroke doesn't change with this system, but where it sits along the cylinder does. Hence those two lines. The variable compression ratio allows this new turbocharged engine to maximize fuel economy when the turbo isn't needed by raising the compression ratio. It will see its first use in the next Infiniti QX50 crossover, previewed by the QX Sport Inspiration concept that's also on display in Paris, and has performance targets of 268 horsepower and 288 pound-feet of torque. After, it will migrate to other Infiniti and Nissan vehicles, with transverse front-drive-based applications first in line. Eventually, it's likely to completely replace Nissan's corporate 3.5-liter V6. We'll be poking around the engine a little more in Paris today to try and get some more info. For now, enjoy those cutaway images and those friendly little lines. Featured Gallery Infiniti VC-Turbo engine cutaway View 14 Photos Paris Motor Show Infiniti Nissan Technology Emerging Technologies engine 2016 paris motor show