2015 Nissan Altima 2.5 S on 2040-cars

Auto blog

Nissan's front-engined Le Mans car caught testing at COTA

As far as we can tell, not only is it true, it's wilder than we could have expected: not only does the Nissan LMP1 entry for Le Mans have its engine in the front, it apparently uses that combustion engine to power the front wheels while its KERS unit powers the rear wheels. Those rear wheels could be of smaller diameter than the front wheels, and total system horsepower for the racer "is a conservative 2,000 [hp]." And check out how far back that pilot is sitting. Let's start with what's been seen in person. A race team testing at the Circuit of the Americas caught the GT-R LM on track a few days ago, so Jalopnik schlepped out to the track the following day and took photos and video. There's a big ol' meaty front end where the twin-turbo Cosworth V6 lives, and that gives way to a trimmer back end. Mulsanne Corner, which has been following the car's development, figures the weight balance percentage is around 55- to 58-percent in the front through strategic placement of the KERS unit and radiators, putting it in the same division as proper mid-engined cars. A prop shaft runs from the KERS in front to the rear of the car. It's speculated that the rear wheels are smaller than the front wheels because of that narrower rear end. In some of the Jalopnik photos the rear wheels do look smaller, which could explain the complicated half-shaft and drop-gear arrangement thought to be housed back there. If all that is true this will already be the "radically different" car Nissan wanted to build. Yet there's more: Mulsanne Corner says the Nissan is targeting an ultra low drag setup, so there's a lot of talk about the car not having a rear wing, or only the hint of one, and Nissan plotting "mental" speed targets for the French track. Having the engine in front is what would offer more flexibility with the rear wing. There's a good chance we'll know what it looks like on February 1, during the Super Bowl. Nissan will air a 60-second spot, and the advance tweet with the tagline "We're Back" and a helmet promises something racey. There are more pics over at Jalopnik along with a brief video of it running at speed.

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper. For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011. The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors. While the adoption of SAE J2807 will be helpful for light-duty customers, those interested in bigger trucks will still be left with differing standards. There is no sign of the new tow standards being adopted for the heavy-duty market.

How Renault, Fiat Chrysler, and yes, Nissan, could save through sharing

If French automaker Renault green-lights a proposed merger with Fiat Chrysler Automobiles, the companies almost immediately could begin saving money by consolidating components and basic structures on many of their most popular vehicles, an industry analyst said on Tuesday. The synergies could multiply if they invite Japanese automaker Nissan, currently Renault's alliance partner, to join the merger, according to a former Renault and Nissan executive. Renault and Italian-American rival Fiat Chrysler Automobiles are in talks to tackle the costs of far-reaching technological and regulatory changes by creating the world's third-biggest automaker. A Renault-Fiat Chrysler combination "would mean a greater sharing of parts (which) could really boost the profitability of Fiat Chrysler's smaller vehicles," said Sam Fiorani, vice president, AutoForecast Solutions. Building similar models on a common vehicle architecture, Fiorani said, "would give both companies a lot more freedom in manufacturing. They could mix brands and vehicle sizes on the same assembly line, switch vehicles between plants to balance production, and even shift production from one country to another, depending on changes in demand, tariffs or other considerations." Fiorani said Fiat Chrysler could benefit from sharing the French automaker's expertise in electric vehicles and powertrains, where Renault and Nissan have jointly invested more than $5 billion. These are areas in which Fiat Chrysler has little in the way of components or intellectual property. Another sector that is ripe for consolidation is light commercial vehicles, where Renault and Fiat Chrysler could build a variety of vans in several sizes on common platforms that could be assembled and sold in global markets. Ford Motor Co and Volkswagen AG began their alliance discussions a year ago by focusing on potential collaboration in light commercial vehicles. Getting Nissan's blessing Fiorani said Renault's CMF architecture, which was jointly developed with Nissan and underpins many of Renault's passenger cars and crossovers, could be used by Fiat Chrysler on a wide variety of vehicles. As an example, he said the CMF could provide a new single foundation for at least five Jeep models, including the Renegade, Compass and Cherokee, which now are based on four different platforms.