2013 Altima 3.5 Sv Super Black on 2040-cars

Auto blog

Infiniti's new VC-T changes the rules of small turbocharged engines

The upcoming Infiniti QX50 crossover does not get our pulse racing, no matter how shapely the QX Sport Inspiration concept that previews it may be. No midsize SUV does, to be fair. But it has something special under the hood – the world's first production variable-compression-ratio engine. That means the QX50's 2.0-liter turbo four, which makes 268 horsepower and 288 pound-feet of torque, will have up to 27 percent better fuel economy. Here's how it works. The trend of moving to smaller, turbocharged engines carries with it one big falsehood. Under low load when the turbo isn't needed, these engines are less efficient than an equivalent engine without a turbo because of the low compression ratio the turbo requires. That is, if you never need the extra power, you're wasting fuel. Turbocharged (and supercharged) engines use a lower compression ratio to prevent detonation. When you force extra air in a cylinder and mix it with fuel, it's more likely to prematurely go boom. Lowering the compression ratio prevents this problem, but it's less efficient. Infiniti's VC-T promises the best of both worlds, with a compression ratio that ranges from 8.0:1 for high-power turbo needs to a 14.0:1 ratio for fuel-sipping efficiency. At its heart the VC-T engine is a simple idea, but it's complicated to explain. Consider yourself warned. The photo below from Infiniti serves as a good visual overview. For the truly nerdy, this patent application covers the mechanical concept. Instead of having the pistons connected to the crankshaft, Infiniti's engine has a pivot arm with a connection on each end. One end connects to the piston, the other connects to a second lower shaft, which is controlled by an actuator arm. At any given time the engine's pistons move up and down according to the lobes on the crankshaft. But the actuator arm can change the angle of the pivot arm up and down. That is, the pistons still move in the same motion with the same stroke, but phase the entire stroke up or down. Move the pivot up and there's less room at the top, which means a higher compression ratio. Move the pivot down and the compression ratio goes down, too. As an added bonus, the lower shaft eliminates the need for counter-rotating balance shafts. Infiniti says this system works constantly and can vary the compression ratio to any number between 8:1 and 14:1. It also uses electronic variable valve timing on the intake valves to switch into Atkinson-cycle combustion for greater efficiency.

Nissan looking to expand UK plant to build Infiniti Q30

With the Infiniti Q30 concept heading to the Frankfurt Motor Show next month and a future premium compact model heading into production at Nissan's Sunderland UK assembly plant, just connecting the dots tells us this new small Infiniti is headed for UK production. Backing this up, Reuters is reporting that Nissan is looking to expand the Sunderland plant by 25,000 square feet, while Automotive News Europe takes it a step further by almost confirming that the Q30 will be built alongside the Nissan Qashqai and Note.
The reports say that Sunderland is already the UK's biggest automotive plant, but the expansion will make it even larger with production capacity expected to rise from the current 500,000 units built each year to more than 550,000. There is no indication if the expansion will bring more jobs to the plant, which already employs around 6,000 people.

Ghosn orders Nissan USA to double sales by 2017

Nissan CEO Carlos Ghosn has just one teensy-weensy request for its United States arm: Double your sales by 2017.
"China was not our biggest, I would say, disappointment. It was mainly the United States. We were expecting a strong year in the United States. It didn't happen," Ghosn said, speaking at a conference after announcing Nissan's 2012 fiscal results, Automotive News reports. Because of this, Ghosn has ordered his US executives to iron out the problems that affected new vehicle launches and to strengthen the company's dealer network.
In 2012, Nissan's US sales rose to 1.1 million units - a five-percent increase, and a record, at that. But the company's overall market share fell from 8.2 percent to 7.7 percent, putting the company further away from its goal of having a 10-percent stake overall.