2010 Nissan 370z Touring Audio Upgrades Navigation Heated Seats One Owner Wow$$$ on 2040-cars

Auto blog

2015 24 Hours of Le Mans live race report

Check back regularly for more race updates every few hours. No, you don't need to stay up for the entire 24 Hours of Le Mans, but if you want to catch any of the action, Autoblog friend Reilly Brennan has a handy guide. And to keep you up to speed on the latest race events, we'll be posting live from Le Mans with regular race reports.Hour 1: Five laps in, Audi breaks up the three Porsches at the front, with the #19 919 Hybrid, driven by Nico Hulkenburg, passed by all three R18s. Hulkenburg eventually took back fifth position only to fall back again after the first pit stop. Meanwhile, clutch trouble kept the #23 Nissan GTR-LM in the pits until 15 minutes into the race. The other two Nissans were forced to start at the back of the grid after failing to the meet the 110 percent qualifying speed regulation. At the end of the first hour, just 7.5 seconds separated the first six cars. Then the factory team #92 Porsche GTE car caught fire, with the the #13 Rebellion P1 car taking frontal damage in the ensuing carnage. With the safety car out, the field is once again bunched up.Hour 2: The slugfest between Audi and Porsche continues, with neither side backing off. Halfway through the second hour the #7 R18 passes both leading Porsches for the top position. After another round of pits stops Porsche regains the lead until lap 30, when the Audi overtake once again and quickly pulls out a three-second gap. Nico Hulkenburg passes the other two Audis to join his Porsche teammates. At the beginning of the third hour it's Audi #7, Porsche #17, #18, and #19, followed by Audi #8 and #9. 33 seconds separates this group, with Toyota a minute back from the front car.Hour 3: On track the action refuses to stop. Although it's early, Audi is looking strong with the overall lead in the #7. What's more is that the Audis run four stints per set of tires, while the Porsche cars have to change rubber every third stop. But after a quick refueling, the lead R18 gets a tire puncture and comes back in 3 laps later, allowing Porsche to take over the top two spots. Then as the hour closes out a yellow flag causes traffic to bunch up and the #8 Audi gets stuck with nowhere to slow down. Driver Loic Duval dives for the side of the road but hits the guard rail and careens across the track, damaging the front and rear bodywork. The rest of the car is still intact, though, and once in the pits Audi replaces the entire front and rear of that in only three minutes.

This tiny 1.5L engine from Nissan makes 400 horsepower

Back in 2012, Ford packed its tiny 1.0-liter EcoBoost three-cylinder in a carry-on suitcase, destined for use in the Fiesta here in the US. In June, Nissan will pack its tiny new three-cylinder engine in a 24 Hours of Le Mans racecar. Nissan's don't-call-me-DeltaWing ZEOD RC racecar will still be able to tackle a single lap under full electric power, but the rest of the time it will be powered by the new 1.5-liter turbocharged three-cylinder engine.
Holding the lightweight engine (at right) is Nismo president Shoichi Miyatani, and he's likely smiling because that 40-kilogram (88-pound) engine packs quite a punch with 400 horsepower and 280 pound-feet of torque. Nissan would like to take a moment to point out this engine's power-to-weight is better than the engines currently used in Formula One racecars. Scroll down for more information on this new race engine, which we'll see in action at Le Mans in June.

Nissan gives us the business on the art of clay modeling

The team from The Dashboard recently stopped by the Nissan Technical Center in Japan for a look at what exactly goes into creating a full-scale clay model. While automakers have been using clay bucks for decades, designers and engineers are now combining computer renderings and hand-sculpted clay models to determine how a new vehicle will look in our world. Engineers use specially formulated clay kept warm in an oven to bring the body panels to life. They then coat the clay in a thin plastic film to add body color for the final look.
By the time everything is said and done, workers may have hundreds of hours in the model's creation. So, what happens when the company no longer needs the buck? They get scrapped. Someone comes in and dismantles the whole creation. We presume that action is set to the wailing tears of everyone who had a hand in building the model. Check out the video below for a closer look.