2006 Mitsubishi Lancer Evolution Mr Sedan 4-door 2.0l on 2040-cars

Auto blog

2022 Mitsubishi Outlander gets IIHS top rating with improved lights

The current sticking point for the Insurance Institute for Highway Safety's (IIHS) highest honors, the Top Safety Pick+, is headlights. The 2022 Mitsubishi Outlander, despite having strong results in almost every category, missed out on any Top Safety Pick rating because of lights rated "Poor" on all models. But Mitsubishi has now fixed them, getting the crossover the coveted award. The rating applies to Outlanders built after June 2021. The LED reflector headlights now have the top "Good" rating on all trim levels because of reduced glare for oncoming drivers. There's also some additional good news for existing owners of Outlanders. They can go to their Mitsubishi dealer, where the existing headlights will have the aim adjusted to reduce glare. The Outlander already had excellent results in crash testing and crash prevention. Every crash test yielded a "Good" rating, and in both vehicle-to-vehicle and vehicle-to-pedestrian crash prevention it got the top "Superior" rating. Even the child seat LATCH anchor access is rated "Good." The Outlander joins the ranks of a number of other small crossovers with the Top Safety Pick+ award, including its platform-mate the Nissan Rogue. Other winners include the Ford Bronco Sport, Hyundai Tucson, Mazda CX-3, Mazda CX-30, Mazda CX-5, Subaru Forester and Volvo XC40. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Junkyard Gem: 1986 Mitsubishi Cordia L

New Mitsubishi cars first showed up in the United States with Dodge Colt badging in the 1971 model year, and a broad range of Dodge- and Plymouth-badged Mitsubishis followed them across the Pacific in subsequent years. For the 1983 model year, cars bearing Mitsubishi badges finally appeared here, and there were four models available to start with: the Starion, Mighty Max, Tredia and Cordia. The sporty Starion and the sibling-to-the-Ram-50 Mighty Max pickup remain well-known to this day, but the Tredia and its Cordia platform-mate have all but disappeared from streets, junkyards and — for most of us — memories. I thought I'd never see another discarded Cordia again after spotting a first-year example nearly a decade ago, but then this '86 showed up in a San Francisco Bay Area self-service car graveyard recently. The Cordia and Tredia were the same car, mechanically speaking. The Tredia was a subcompact sedan priced to compete with the Toyota Corolla and Honda Civic, while the Cordia was a slick-looking liftback coupe that sought to lure potential buyers away from the likes of the Datsun 200SX, Toyota Celica and Isuzu Impulse. Both the Cordia and Tredia sold very well in Australia and New Zealand, but North Americans mostly ignored the Cordia and laughed at the Tredia. The last model year for both models in America was 1988. The Cordia was a cousin to the Galant and had the same front-wheel-drive layout. In 1986, Cordia engine choices were a naturally-aspirated 2.0-liter 4G63 straight-four rated at 88 horsepower and 108 pound feet and a turbocharged 1.8-liter 4G62T straight-four with 116 horsepower and 129 pound-feet. This car has the 2.0. A five-speed manual transmission was base Cordia equipment, but the original purchaser of this car opted for the 380-buck automatic (that's 1,067 of today's bucks). The emissions sticker tells us that this is a California-market car rather than a "49-state" version. Surprisingly for a car like this in the middle 1980s, an AM/FM stereo radio was base equipment. That worked out well for those who enjoyed the great music of the era. However, if you wanted to play cassettes you had to pay extra. This setup with separate cassette deck was fairly common during the decade; the cost for the 1986 Cordia was $133 (about $374 in 2023 dollars). The paint is faded but the interior doesn't look terribly thrashed.

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.