Mr,1 Owner,all Stock Equipment,super Clean,low Miles,ask For Jason!!!! on 2040-cars

Auto blog

Junkyard Gem: 2006 Mitsubishi Raider DuroCross 4WD

Chrysler began selling Mitsubishi Triton pickups with Dodge D-50 and Plymouth Arrow badging in the 1979 model year, followed by the Mitsubishi Pajero aka Montero with Dodge Raider badges for 1987 through 1989. That Raider name sounded so good that Mitsubishi Motors decided to revive it when they began selling a new pickup based on the Dodge Dakota in the United States. Today's Junkyard Gem is a first-year Mitsubishi Raider, found in a Denver car graveyard recently. The Raider was mechanically identical to its same-year Dakota counterparts and it was built alongside the Dakota at Warren Truck Assembly, but it had its own body and interior designs. The Raider was built for the 2006 through 2009 model years, after which it was discontinued due to poor sales (just under 22,000 total). It wasn't as humiliating for Mitsubishi as the Ascender and I-Series (both thinly disguised Chevrolet models) were for once-proud Isuzu, but that isn't saying much. There's no need for us to bring up the puzzling Suzuki Equator here, is there? This one is a DuroCross, which came with lower suspension, black plastic wheel flares and a front bumper that looked skid-plate-like. It also has the most powerful engine available in the '06 Raider: a 4.7-liter V8 rated at 230 horsepower.  The 4.7 is a member of the Chrysler PowerTech engine family, which has an ancestry stretching all the way back to the American Motors Corporation. AMC began development of new overhead-cam V6 and V8 engines just before Chrysler purchased the company in 1987, and the 4.7-liter V8 made its debut in the 1999 Jeep Grand Cherokee. The 2009 Raider was the last new Mitsubishi pickup sold in the United States, though Mexican truck shoppers can still enjoy mas poder de aventura by buying a new Mitsubishi Triton with L200 badges. Who knows, if it's possible to find Mexican-market Peugeot 407s, Dacia Logans, Dacia Dusters and Opel Corsas in Colorado junkyards, I may yet find a discarded Mitsubishi L200. It was much more intimidating than an ordinary Dakota.

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.

2021 Mitsubishi Outlander PHEV Road Test Review | Improved but falling behind

You can’t tell by looking at it, but the 2021 Mitsubishi Outlander PHEV is a thoroughly upgraded version of the plug-in crossover that initially debuted in the United States for the 2018 model year. Yes, despite the fact that there is a completely new, from-the-ground-up version of the gas-only Outlander for 2022, the previous generation soldiers on in its plug-in hybrid form for at least the next couple of model years as the engineering team puts the finishing touches on an edition based on the new platform. Still, thereÂ’s a lot of new bits and pieces under the skin that make this a better and more useful electrified SUV than before. A new 2.4-liter four-cylinder engine replaces the previous 2.0-liter, bumping power to 126 horsepower and 148 pound-feet of torque. It join forces with upgraded electric motors to send as much as 221 hp to all four wheels. That's a 31-horsepower increase over the old Outlander PHEV.  Most of the time, the gasoline engine sends its power to the battery pack, leaving motive force to come from the two electric motors. Up front is a motor that delivers 60 kilowatts (around 80 hp) and 101 lb-ft; at the rear is a second motor that spins out 70 kilowatts (94 hp) and 144 lb-ft. That rear motor is up 10 kilowatts over the old version, which is significant. Electric range is boosted from 22 to 24 miles thanks to a 13.8-kWh battery in place of the old 12-kWh pack. These powertrain enhancements make the 2021 Outlander PHEV feel quicker around town than the old one while simultaneously improving its efficiency. Win/win. There are Eco, Save, Charge, Normal, and Sport driving modes, and they all make sense with the possible exception of Sport, since this is very much not a sporty sport utility vehicle. Save mode preserves the battery packÂ’s current state of charge in case you want to choose when to unleash your electrons (stop-and-go city driving after a lengthy highway commute, for instance), and Charge mode keeps the engine running to top off the battery pack while the vehicle is driven. We mostly left the vehicle in Normal mode and let it choose how to dole out the power. The overlying theme of the 2021 Outlander PHEV is one of peace and serenity. ItÂ’s quiet inside, and the electric motors provide a smooth driving experience with softish initial power that gains steam as the vehicle gets to normal around-town speeds. There arenÂ’t any gear changes, so the powertrain always feels smooth.