2011 Mistubishi Endeavor Ls Awd on 2040-cars

Auto blog

Mitsubishi recalls 141,000 Lancers, Outlanders, and Outlander Sports

Mitsubishi issued two recalls this month, one big, one small, that affect several cars from the brand's past and current lineup. The major recall covers old Lancers, Lancer Sportbacks, Outlanders, and Outlander Sports that might have an issue with corrosion weakening the suspension. The second recall affects the current-generation Outlander and Outlander PHEV that have improperly built seat belt assemblies. NHTSA campaign No. 20V279000 states that Mitsubishi is recalling 141,200 2008-2010 Lancers, 2010 Lancer Sportbacks, 2008-2013 Outlanders, and 2011-2016 Outlander Sports due to the possibility that the front cross member on these vehicles might be damaged. If these vehicles encountered road salt, snowmelt water, and anti-freezing agents, the cross member could corrode. If the cross member corrodes, there is a slight possibility the front control arm could detach and create an extremely dangerous situation.  This recall only pertains to vehicles in the Salt Belt region, which includes Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin, and Washington D.C. Mitsubishi dealerships will inspect affected cars and make a judgment call from there. If the damage is minimal or non-existent, Mitsubishi will spray and seal the cross member with new anti-corrosion protection. If the cross member is damaged, Mitsubishi will replace it for free.  NHTSA campaign No. 20V280000 affects 3,238 2019-2020 Outlanders and 2019 Outlander PHEVs due to potentially faulty seat belts. On these vehicles the seat belts for the second-row passenger-side seat might have the wrong part. "Due to inappropriate manufacturing process at the supplier, the guide piece (which is a component part of the second-row seat belts’ anchorage) for the left side seat belt was mistakenly assembled with the right side seat belt, causing seat belt restraint efficiency for vehicle occupants to decrease in the vehicle collisions," a recall document states. Mitsubishi dealerships will inspect the seat belts in affected cars and replace them, if necessary. It is believed only 1% of the 3,238 vehicles have the defect. Visit the NHTSA for more information.

Mitsubishi Mi-Tech turbine-PHEV buggy blows the doors off our dreams

TOKYO — For this year's Tokyo Motor Show, Mitsubishi went all out with the Mi-Tech concept. It's a tough-looking open off-roader with a wild hybrid powertrain. It's glorious, which makes it all the more sad it will likely never see the light of day. From the outside, the Mi-Tech impresses with blocky lines and fat fender flares. But its star feature is the fact that it has no roof and no doors. The only thing that comes close is the pair of cowls behind the seats. The inside has a spare design with a body-color dash and cutouts for vents. It does have modern cues such as the piano-key buttons and fullscreen heads-up display. Under the skin, it's powered by four motors, each controlling an individual wheel. This allows it to adjust power precisely in off-road settings. It's a plug-in hybrid, and when the battery runs down, electricity is produced by a turbine engine, similar to the Jaguar C-X75 concept. Mitsubishi opted for the turbine for its high power, small size, smooth operation and the fact it can run on just about any combustible liquid. As much as we love the Mi-Tech, it's obvious it's not going into production anytime soon. Mitsubishi has no car-ready turbine engines, and it would be expensive to make an SUV with no doors, or even removable doors, pass safety standards. And the people that would buy a vehicle like this will probably be satisfied with a Jeep Wrangler or the upcoming Ford Bronco. Oh well, it's at least a pleasant dream, and a sign that Mitsubishi still has some spark.

Mitsubishi off-road Delica van, outdoorsy Outlander variant planned for US market

If you haven't been paying attention, you may be surprised to hear that Mitsubishi has been doing fairly well in the United States over the last several years. Once a mid-major (to borrow a college athletics term) program here in the States, the automaker's stagnating lineup and lack of vehicles with clear desirability — once you got past the hardcore Lancer Evolution series, at least — led to declining sales figures through the 2000s. The brand's more recent resurgence, led by the latest Mitsubishi Outlander and Outlander PHEV, which it co-developed with fellow Japanese partner Nissan, first began around the year 2018, says Mitsubishi North America President and CEO Mark Chaffin. "Momentum 2030 will build on that, setting the stage for new powertrains and vehicles being introduced, new dealerships being opened, and new technologies being developed to make the shopping and ownership experience faster, easier and more enjoyable." "New powertrains and new vehicles" are always keywords that pique the ears of automotive enthusiasts, and Mitsubishi seemingly has some solid stepping stones in the works to continue gaining momentum in the crucial American market, with trucks, crossovers and multi-purpose vehicles that could offer some truly interesting entries into segments the automaker hasn't dipped its toes in decades. One particular potential vehicle of interest is, oddly enough, a passenger van, which appears to be shown in the middle of the line-up preview photo below. But we're not talking about a run-of-the-mill minivan. According to dealership employees present at Mitsubishi's Momentum 2030 program cited by Automotive News, the van would take inspiration from the D:X Concept that we openly loved after its introduction in Tokyo last year. The van would reportedly maintain its rugged credentials — perfect for the growing number of Americans who embrace off-road lifestyles like camping and overlanding — and feature a plug-in hybrid powertrain. We can't imagine some of the concept's far-out features like a front glass panel to see the ground ahead or a dashboard and steering wheel setup that moves with the driver's door making it into production. The three-row, six-passenger seating arrangement and true off-road tuning on the other hand are likely items for the final product.