===== 2008 Mitsubishi Galant ~ Ralli-art Edition ~ No Reserve ===== on 2040-cars

Auto blog

Mitsubishi Mi-Tech turbine-PHEV buggy blows the doors off our dreams

TOKYO — For this year's Tokyo Motor Show, Mitsubishi went all out with the Mi-Tech concept. It's a tough-looking open off-roader with a wild hybrid powertrain. It's glorious, which makes it all the more sad it will likely never see the light of day. From the outside, the Mi-Tech impresses with blocky lines and fat fender flares. But its star feature is the fact that it has no roof and no doors. The only thing that comes close is the pair of cowls behind the seats. The inside has a spare design with a body-color dash and cutouts for vents. It does have modern cues such as the piano-key buttons and fullscreen heads-up display. Under the skin, it's powered by four motors, each controlling an individual wheel. This allows it to adjust power precisely in off-road settings. It's a plug-in hybrid, and when the battery runs down, electricity is produced by a turbine engine, similar to the Jaguar C-X75 concept. Mitsubishi opted for the turbine for its high power, small size, smooth operation and the fact it can run on just about any combustible liquid. As much as we love the Mi-Tech, it's obvious it's not going into production anytime soon. Mitsubishi has no car-ready turbine engines, and it would be expensive to make an SUV with no doors, or even removable doors, pass safety standards. And the people that would buy a vehicle like this will probably be satisfied with a Jeep Wrangler or the upcoming Ford Bronco. Oh well, it's at least a pleasant dream, and a sign that Mitsubishi still has some spark.

2020 Mitsubishi Outlander Sport shows its big, new face in America

The 2020 Mitsubishi Outlander Sport initially showed us its new sheetmetal at the Geneva Motor Show, but we got a chance to check out the vehicle in the flesh at the company's research and development center in Ann Arbor, Mich., today. Nearly everything we learned about the Outlander Sport (known as the ASX in other markets) before applies to the North American version of the vehicle. However, one aspect we were uncertain of was the continued presence of the manual transmission. We asked, and Mitsubishi is officially dropping the stick shift version of the Outlander Sport with this update. It was previously only available on the base trim level, exclusively paired with the 2.0-liter four-cylinder engine. Mitsubishi was one of the last holdouts to offer a manual transmission option in the small crossover market, and now they're officially out. Three-pedal versions of the Outlander Sport represented just 2% of total model sales, so the business case just wasn't there anymore. We confirmed that the powertrains from the 2019 model year car will carry over to the 2020 Outlander Sport, which means you'll have the choice between the 148 horsepower 2.0-liter or the 168 horsepower 2.4-liter four-cylinder. Both engines are paired to a CVT. Of course, all-wheel drive will also continue to be available optionally. The big changes are in the styling that Mitsubishi thinks will make it stand out among competitors. Looking at the crossover directly in the face gives us a real truck-like and rugged vibe. This is where Mitsubishi put most of its eggs, appealing to folks who want a tougher looking vehicle. To our eyes, the execution comes off as a bit haphazard, lacking in cohesiveness with the sheer number of things going on. There's gray satin plastic, piano black plastic and flat black plastic all hanging out next to each other. Then the "shield" sort of juts outward at us, standing in stark contrast with the shiny reflective surfaces on either side of it. Judge for yourself, but the previous design was slick and much simpler than this mash up. Mitsubishi kept things relatively subdued out back, and we like the evolution of the taillights and rear bumper here. There isn't much to speak about down the sides other than a different wheel design and a small fake vent added. One could argue the interior was the Outlander Sport's sorest point, but sadly Mitsubishi chose to neglect this part of the car.

Your 2013 Pikes Peak Hill Climb primer: "Donuts at 14,000 feet."

The teams have all set up their pits and paddocks for today's run of the 91st Pikes Peak International Hill Climb, and there's nothing left to do but take a shot at the title. At 8 am Mountain time (9 am EST / 7 am PST), the first of a field of 83 bikes and 63 cars - whittled from an original field of 157 - will race 12.42 miles through 156 turns from the start gate at 9,390 feet to the summit finish at 14,110 feet. The summit is where we'll be all day, having arrived on the media bus at around 5 am and not allowed to come down until the race is finished. If it's anything like last year that could mean a 14-hour day on the top munching on donuts at the summit café, begging for hits of pure oxygen and trying to stay hydrated and warm...
Here are the event with Hyundai, we enjoyed dinner with Rhys Millen got his take on what's happened and what's about to happen. Millen said the issue that caused his engine swap last week was minor, a head gasket (a production part) that was causing a bit of hesitation and a slight drop in top speed. He said it's the first time they've stressed the engines this hard, pushing boost pressures up to 19 psi at altitude, which equates to 25 psi at sea level. Offering testament to the strength of the engines, though, he said that Paul Dallenbach's engine did the entire 2012 drift season as well as Pikes Peak, and it's the engine being used again for the hill climb this year.
We also chatted with Dallenbach, who has come back from that beastly crash last year in the Unlimited category to lead almost every practice day this year in the Time Attack class. Telling us he's happier behind the wheel this year than he has been in 20 years, he asked us, "Know what my dashboard says when I turn the car on? 'Donuts at 14,000 feet.'"