1992 Mitsubishi 3000gt Vr4 on 2040-cars

Auto blog

2019-22 Mitsubishi Outlander Sport recalled for transmission fault

Mitsubishi says 76,508 Outlander Sports from the 2019 to 2022 model years need to return to dealers for updated software, according to a recall notice from the National Highway Traffic Safety Administration. Some code released for the electronic control unit managing the continuously variable transmission can suffer a fault if the unit loses power temporarily. In such instances, when power is restored, the software can command the CVT to reset to the lowest 'gear' possible. If this occurs at high speeds, the engine over-revs, and a piston can come into contact with an exhaust valve which then causes the engine to stall. It also kiboshes the engine. This is a bad possibility anywhere, but especially on the highway. It took Mitsubishi engineers about two years to figure out the problem, during which the company has dealt with 50 reports and warranty claims, but says it knows of no injuries or accidents due to the problem. The only Outlander Sports involved in the recall are those with a CVT that need a mechanical key to be started, built from July 31, 2018 to and May 11, 2022. Models with the manual gearbox or push-button start aren't affected. For now, the 2011 to 2018 Outlander Sport isn't included, the software change said to coincide with the 2019 model year. Dealers will install new software that decides on the proper CVT target ratio after a transmission control unit reset.    The automaker said it will begin notifying owners by mail on August 24. Those with questions can call Mitsubishi Motors North America customer service at 888-648-7820 and cite recall number SR-22-004. They can also get in touch with the National Highway Traffic Safety Administration at 888-327-4236 and refer to campaign number 22V563.  Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Former Mitsubishi CEO Osamu Masuko dies at 71

TOKYO — Former Mitsubishi Motors Chief Executive Osamu Masuko, who engineered the Japanese automakerÂ’s alliance with Nissan, has died. He was 71. Masuko was named a special adviser to the company when he resigned for health reasons as of Aug. 7. Mitsubishi said he died of heart failure on Aug. 27. Masuko joined with former Nissan Chairman Carlos Ghosn in forming an alliance in 2016. Ghosn was arrested and charged with alleged financial misconduct in late 2018, but skipped bail and fled to Lebanon. After he was named president of Mitsubishi Motors in 2005, Masuko worked hard to rebuild its brand image, which had been hammered by a massive, systematic and decades-long cover-up of defects that surfaced in the early 2000s. Calm and soft-spoken, Masuko came to symbolize Mitsubishi Motors' revitalization. Masuko had said he was stunned and saddened by Ghosn's arrest. “I still canÂ’t figure out why, and I just donÂ’t understand,” he told reporters then. Nissan Chief Executive Makoto Uchida offered his condolences. “His wisdom and foresight will remain as an inspiration to the automotive industry, and we will always honor his memory,” Uchida said, stressing his role in building the alliance as well as other contributions to the overall auto industry. Mitsubishi's alliance with Nissan and Renault of France was seen as an astute move, giving the automakers an edge in an increasingly competitive global market. “During his tenure for about 16 years at MMC, Masuko made great achievements by fully demonstrating his management skills, which also enabled the company to overcome difficulties,” Mitsubishi Motors said. Masuko helped build the companyÂ’s business in Southeast Asia, a key source of growth. He also aggressively pushed the development of greener models. Masuko studied political science and economics at Waseda University and did not have an engineering background. He joined trading company Mitsubishi Corp. in 1972. In 2004, he joined Mitsubishi Motors, which makes the Pajero and Outlander sport utility vehicles, as managing director of its overseas operations. Tokyo-based Mitsubishi Motors said it is not planning any special services, respecting MasukoÂ’s wishes. The family has already held a vigil and funeral, it said. Related Video:

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.