2013 Mini Cooper N18 Jcw, Clean Carfax, Convertible, 6-spd Manual, on 2040-cars

Auto blog

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.

JCW Tuning Kit comes to Mini Countryman and Clubman

Mini devoted one line in the middle of its SEMA press release to the limited-edition Ice Blue Cooper S Hardtop on show at SEMA. We'll give it a few more lines: the Ice Blue hue hasn't been available since 2013, and Mini's being coy about how long the color will hang around. Available on two-door Cooper models, the Ice Blue package adds optional features beyond color, like custom wheel caps and Mini Connected, and adds a few thousand dollars to the MSRP depending on which Cooper you start with. Ready for the big Mini news? The John Cooper Works Tuning Kit will soon be available for Cooper S and Cooper S ALL4 Countryman and Clubman; before now, the kit could only be had for the Cooper S hardtop and convertible. The kit juices horsepower up to 208 hp from 189 hp, and throws in another 14 pound-feet of torque to top out at 221 lb-ft. The stainless-steel exhaust reduces exhaust gas back pressure, and can be controlled via Bluetooth for Sport or Sport+ auditory response. Sport, we're told, is safe for any road, while Sport+ makes a track-only kind of cacophony. The back-end growl gets piped through either chrome or carbon fiber tailpipes. The JCW Tuning Kit goes on sale in January 2018 for $1,950, and can be installed at any Mini dealer. Related Video: Featured Gallery Mini Ice Blue Cooper S Hardtop View 10 Photos Related Gallery Mini John Cooper Works Tuning Kit Aftermarket SEMA Show MINI Coupe Performance mini clubman mini cooper s jcw

2025 Mini Countryman E makes U.S. debut, arrives fall 2024

The 2025 Mini Countryman was revealed in electric SE ALL4 form at this year’s Munich Motor Show, but now itÂ’s time to see the base E version of the next-gen Countryman make its debut in the U.S. As you can see from the photos, the base E (painted in green) looks notably different from the SE ALL4. All of the gold-tinged accents are replaced with glossy black, and the distinctive panel aft of the C pillar nearly disappears into the design because it blends into all the other black-painted trim. The front grille design is similar, but it doesnÂ’t have the matte gold surround or the side intakes on the corners of the lower bumper. Of course, the green “S” isnÂ’t present either, and the look in general is far less sporty. Perhaps the most jarring of all the changes is the different (and much smaller) wheel design. Instead of the 20-inch flashy blades seen on the SE model, this Countryman E is rocking much more sedate 18-inch wheels in a traditional bright alloy appearance. All that extra sidewall makes the Countryman look more like the larger crossover that it is, and ultimately, our eyes tend to favor the larger wheel option. The Countryman EÂ’s rear design is largely the same as the SE, though the lower bumper features a painted insert instead of brushed brightwork. MiniÂ’s bright side sills are deleted on the E, as well, replaced by a simple, black plastic sill. Unfortunately, this reveal is largely just a reveal in photos. The only nugget of information Mini had to add is that this electric Countryman will arrive stateside in the fall of 2024. Basically, youÂ’ve got at least another year to wait until you can put one in your driveway. More specs and details for the U.S. market will be released in due course. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery 2025 Mini Countryman E View 12 Photos Green MINI Crossover SUV Electric