2012 Used Cpo Certified Turbo 1.6l I4 16v Automatic Fwd Coupe Premium on 2040-cars

Auto blog

Mini John Cooper Works GP spied with wide body, big wing

The Mini John Cooper Works GP was just announced to have over 300 horsepower, and we got an early glimpse at it with teaser images. And now one of our spy photographers caught the car with very thin camouflage. The spy photos reveal that the Mini GP is sticking fairly close to the Frankfurt concept, but toning everything down a bit. At the front, the Mini GP clearly is using the current John Cooper Works hardtop front bumper, but it does have deep chin spoiler additions that allude to the GP concept's massive splitter. The grille has been revised, and the gloss black lower sections are now made of a matte black mesh design. The slot in the middle could have red accents on each side like the red stripe on the concept. The front spoiler blends right in to the new extra-wide fender flares. While the fender extensions don't protrude as far as on the concept, they're otherwise very similar in how they sweep backward at the tops and stand away from the body to allow air to flow through. Something else noticeable from the side are the enormous front brakes. The rotors nearly fill up the wheels, and the calipers look really beefy. The five-spoke wheels on this prototype will be replaced by GP-signature four-spoke wheels as revealed by teaser shots. The back of the GP looks about how we would imagine it. The split rear wing is roughly the same shape as the concept's, but a little narrower. The bumper has a big diffuser area that doesn't necessarily look functional, but should at least look cool. The rear exhaust tips look bigger than normal Mini John Cooper Works models. The Mini GP will go into production in 2020. Only 3,000 examples will be built. We suspect the GP will use the same turbocharged 2.0-liter four-cylinder engine as the BMW X2 35i, which makes 306 horsepower and 332 pound-feet of torque. Coupled with weight savings, possibly involving a rear seat deletion, and upgraded suspension, and this should be a shockingly fast Mini. Related Video:

Spectre Type 10 is a 230-hp, $180,000 mid-engined Mini restomod

Restomodded classic Minis are nothing new, right? A number of reworks swap the original 1.3-liter engine, Honda's VTEC K20 four-cylinder being such a popular replacement that Mini Mania makes a complete swap kit, but the 1.0-liter Ford EcoBoost gets love, too. Some mods replace the engine and move it behind the front seats, a popular option when using the four-cylinder from a Suzuki Hayabusa motorcycle. Some restomods don't do any of that, but just overhaul everything and charge a lot for it, like the David Brown Automotive Mini Remastered that costs around $100,000. As caught by Carscoops, Spectre Vehicle Design out of Vancouver, Canada has done all of the above with its Type 10 Mini restomod, raising the bar for conversions into another dimension. There will only be ten of the Launch Edition Type 10s, and about the only original part left from an original donor hatchback will be the bodyshell. These will be sourced in the same state as the buyer's residence in order to ease the process of vehicle registration. Into that bodyshell, the small Canadian team of enthusiasts has placed a Honda K20 mill with a Haltec engine management system behind the front seats. Shifted through a six-speed gearbox, we're told VTEC kicks in with 230 horsepower at the rear wheels, shunted through a limited-slip differential. In a vehicle reported to weigh 1,700 pounds wet, we're talking serious shove. Committed to keeping the Mini's ten-inch wheels, Spectre designed a new trailing arm suspension to make the package work. Those wheels are three-piece, six-inch-wide, CNC'd aluminum units with staggered offsets and directional spokes to usher hot air away from the four-piston disc brakes.  The cabin looks like a Japanese-infused Mid-Century modern living room, given a touch of carbon fiber and Monica Bellucci. Creative Director Marco Lii patterned the seating aesthetic off a genkan, the foyer area in a Japanese home where one removes ones shoes. The genkan floor is often recessed in relation to a home's main floor, and so it is here in the Type 10. There's a tatami-like mat on the cabin floor, the two interior seats placed on a dais a level above that. The copious light wood and leather interior with chrome accents is understated and gorgeous, everything so well integrated that it takes a moment to recognize the full-cabin roll cage wrapped in stitched leather. The padded center armrest on thin chromed legs looks like a piece in a high-end furniture store.

Mini Clubman to get the 'Works,' four-door Hardtop not so much

Performance sub-brands are expanding faster than leftover marshmallow Peeps in a microwave. And Mini's John Cooper Works line is not likely to be an exception. Mini's stand at the New York Auto Show was somewhat low-key, with the debut of the Clubman All4 all-wheel-drive variant on one end and the expected John Cooper Works Convertible on the other. And for the foreseeable future, the Mini lineup will change through redesigns of existing models and the introduction of more derivatives – like a John Cooper Works version of the new Clubman. At least that's what some of Mini's product guys indicated. "The Works is always our top model. John Cooper Works is not just limited to small cars, it's also for compact cars," said Ralph Mahler, Mini's head product manager, in an interview with Autoblog at the New York Auto Show. "Therefore, I wouldn't see anything against bringing the Works to the Clubman. I think it would be a perfect match." Though one was offered in the last generation, a Works model may seem at odds with the new Clubman's mission, as the company has spent considerable effort pitching it as the grown-up Mini, something to rival premium-branded compacts. Yet Mahler sees a possible Works Clubman as the ultimate in the lineup and an exclusive model, especially since he said take rate for the rest of the Works Minis is around 5 percent. Patrick McKenna, Head of Product Planning at Mini USA, said that since the Clubman went on sale early this year, ordering has included mostly highly optioned models, and customers are notably cross-shopping the Audi A3. Loaded up, a Clubman Cooper S All4 pushes past the $45,000 mark. Currently, the most powerful Cooper S produces 189 horsepower from its 2.0-liter turbo four. That's more power than a front-drive A3 1.8T, but less than the A3 2.0T Quattro – and way less than a cheaper Volkswagen Golf GTI. Consider that the engine in the just-released John Cooper Works Convertible produces 30 more horses than the one in the Cooper S and a Works Clubman starts to make more sense. Strangely, the four-door Mini Hardtop, released last year, doesn't appear to be destined for the Works treatment. McKenna said the four-door will continue to offer special appearance packages that offer Works-like touches and offer dealer-installed accessories such as exhausts and horsepower increases.