2012 Mini Cooper S Goodwood Edition (rolls-royce Interior) 1 Of 140 In The Us on 2040-cars

Auto blog

Mini Cooper SE Convertible wheels made entirely from recycled aluminum

Mini has revealed an interesting fact about its limited-run Mini Cooper SE Convertible: It's the first production car with wheels made from 100% recycled aluminum. Despite sharing the same look as wheels available on the regular SE hatch, they're actually much more environmentally friendly. The wheels were developed with Swiss wheel manufacturer Ronal. The company sells aftermarket wheels under the Ronal and Speedline brands, and it supplies OEMs. And it's no stranger to more environmentally-friendly wheel production. It supplies wheels for the Audi E-Tron GT that are made using a smelting process that produces oxygen rather than carbon dioxide, and it now has a line of claimed carbon-neutral aftermarket wheels. But back to the Mini's wheels. Using all recycled aluminum has the obvious benefit of not requiring new aluminum to be manufactured. But the benefits are greater than just the raw material use. Mini points out that a major improvement in carbon emissions comes from being able to skip the electrolysis process for new aluminum manufacturing. Pure aluminum is extracted from aluminum oxide (which is in turn taken from the mineral bauxite). To do this large amounts of electricity are passed through molten solutions of aluminum oxide and cryolite (which takes energy to heat) across graphite cathodes and annodes. Not only does this use a lot of electricity that has its own carbon costs, the oxygen that separates from the aluminum bonds to the graphite annodes, yielding more carbon dioxide (which is why the production of those Audi wheels is also interesting). In total, Mini says the recycled wheel production reduces carbon emissions by 75%. More specifically, it estimates about 0.16 kilograms (0.35 pounds) per kilogram (2.2 pounds) of aluminum used. Mini also stresses that this process still maintains all the strength of conventional wheels, just in a greener way. And of course, the wheels themselves are recyclable again. Mini, and BMW more broadly, are looking at ways to upscale the process and to source suitable recyclable products, likely other old wheels from cars no longer on the road. Though neither company said anything about when we'll see fully recycled wheels more widely available. Related Video: MINI Electric Pacesetter inside and out

Meet the Mini Urbanaut concept: an autonomous Mini minivan

If car designers are to be believed, the future of fully-autonomous electric vehicles is the box. Whether it's squared-off or rounded, it seems many autonomous concept vehicles are vans meant to efficiently carry people and stuff, or be a new living space. And that's the case with the Mini Urbanaut concept, just on a smaller scale. The Urbanaut measures in at 14.6 feet long, which is a little more than 2 feet shorter than a Toyota Sienna. But if it were put into production, it would be the biggest Mini on sale at roughly half a foot longer than the Countryman, and easily as tall if not taller (Mini didn't provide an exact height). It takes the one-box shape close to its extremes, similar to a VW Bus, which itself is seeing an electric revival. At the front, an aluminum grille inspired by the current Mini grille hides LED lights for illumination and communication, and taillights get similar aluminum coverings. The wheels are translucent and illuminated. There are cutouts that are inspired by the Union Jack flag. The Urbanaut features two particularly unusual design choices, though. The first is that it has a single sliding door for interior access. The second is that one of the C-pillars is actually a sort of display case that can store a variety of souvenirs or other trinkets. Isn't that cute? The interior has seating for four, with a rear bench and conventional bucket seat at the front for the driver next to a sort of jump seat. The driver seat can swivel to face the front for manual driving, or to face the middle for parked or autonomous modes. In between the rows of seats is a table with a decorative plant as well as the main instrument display and infotainment interface. The screen is round, a callback to old Mini instruments and the current cars' center infotainment binnacle. The idea is that the Urbanaut would primarily be used in autonomous or parked modes with occupants facing toward the middle. There is, however, a secondary display that activates at the front when the car is in manual driving mode. The interior has a number of nifty party tricks. There's a ceiling section above the rear seats called the "Loop" that has animated illumination behind a fabric covering. The dashboard lowers at the front in the stationary mode to create a daybed. The windshield can open up, too, when parked. Different vehicle modes are accessed by placing the key fob, called the "Mini Token," in the corresponding slot.

Mini Cooper Royal Wedding Edition: For the couple that literally has everything

As far as wedding presents go, it sure beats a hand mixer. Mini has created a one-off car to commemorate the wedding of Prince Harry and Meghan Markle. The car won't be brought in and parked next to the gift table, however. Instead, it'll be given to a charity chosen by the royal couple, which will then auction it. Mini's design team has personalized a Mini Cooper 2-Door with a hand-made roof graphic and a special interior, which features 3D-printed parts and special embroidery. The idea behind the hand-applied multi-layer roof graphic is that it's a combination of the Union Jack and the Stars & Stripes, representing the couple's nationalities. As an extra touch, the opened doors will project a "Just Married" sign onto the ground. Small detailing around the car is also bespoke, from the chrome finish to the side scuttles. Inside the Crystal White car is a Satellite Grey leather interior, with a trim strip announcing the first names of the bride and groom, as well as the wedding date. There are also accents in the door cards that match the roof graphic's colors. And just in case you're digging the stylistic vibe of the Royal Wedding Edition (not really the official name, but let's go with it), some of the custom work on the car can be replicated with the Mini Yours personalization program. That includes the option of 3D-printed parts. After the wedding on May 19 , the car will go to The Children's HIV Association, or CHIVA, who will auction it. Here's hoping it commands a good price. Related Video: Featured Gallery Mini Royal Wedding View 13 Photos Image Credit: MINI MINI royal wedding meghan markle