2011 Mini Cooper Hardtop Coupe on 2040-cars

Auto blog

Mini recalls 30K Hardtops to improve side-impact protection

Mini is recalling 30,456 units of its two-door models because they don't conform to federal side-impact requirements for the rear seat passengers. According to the documents submitted to the National Highway Traffic Safety Administration (here as a PDF), this includes 15,653 examples of the 2014-2015 Mini Cooper Hardtop, 14,782 units of the 2014-2015 Mini Cooper S Hardtop, and 21 of the 2015 Mini John Cooper Works Hardtop (pictured above). Those with production dates between December 2013 and March 2015 are affected, the automaker reports in a statement to Autoblog. According to NHTSA, the agency tested a 2015 Cooper and Cooper S Hardtop on July 1 and 2, but the S didn't meet one of the impact requirements. The analysis showed that rear passengers in these vehicles were potentially in greater danger in a crash. Upon further research, the government and Mini found more models potentially affected. The automaker isn't aware of any reports of accidents or injures from this problem. To rectify the situation, dealers will add more energy-absorbing material in the space between the rear interior panels and the exterior of the hatchbacks, which will take around four hours. The campaign to fix them will begin on Sept. 12. RECALL Subject : Side Impact Crash Worthiness/FMVSS 214 Report Receipt Date: JUL 17, 2015 NHTSA Campaign Number: 15V450000 Component(s): STRUCTURE Potential Number of Units Affected: 30,456 All Products Associated with this Recall Vehicle Make Model Model Year(s) MINI COOPER 2014-2015 MINI COOPER S 2014-2015 MINI JOHN COOPER WORKS 2015 Details Manufacturer: BMW of North America, LLC SUMMARY: BMW of North America, LLC (BMW) is recalling certain model year 2014-2015 MINI Cooper and MINI Cooper S Hardtop 2 Door vehicles and 2015 MINI John Cooper Works Hardtop 2 Door vehicles. The affected vehicles do not meet the side impact performance requirements for the rear seat passengers. As such, these vehicles fail to comply with Federal Motor Vehicle Safety Standard (FMVSS) number 214, "Side Impact Protection." CONSEQUENCE: If the side impact performance requirements are not met, rear seat passengers may be at a higher risk of injury during a crash. REMEDY: MINI will notify owners, and dealers will install additional energy absorption material between the rear interior side panels and the exterior vehicle body, free of charge. The recall is expected to begin September 12, 2015. Owners may contact MINI customer service at 1-866-825-1525.

Next-generation Mini Cooper electric car caught in spy photos

Though the current generation of Mini Hardtop just got a refresh, it seems a new generation is around the corner. That new model appears in the spy photos above, and in electric form no less. At first glance, it doesn't look very different, but there are many small changes that add up to make it distinctly its own. At the front, the headlights appear to be more circular than the slightly ovoid units of the current model. They look as though they wrap a little more around the fenders, too. The grille appears to be enlarged a bit to match the bigger headlights, and the changes give the car even more of a cute, wide-eyed appearance than before. Other interesting things to note are that the hood scoop may be going away, as the one on this car is a fake. The hood cut lines also seem to go through to the wheel arches. Other subtle changes are revealed in profile. The front overhang looks slightly reduced, and the windshield looks more raked. Part of that appears to be because of the base being moved slightly forward. Not only has the windshield become more raked, so has the rear window. It's hidden by the newly added aerodynamic fairings below the rear spoiler. Finally, we can see the chrome, refrigerator-style door grab handles are gone in favor of more flush-fitting handles, and the charging door has changed sides to the left of the car. The back doesn't reveal much unusual, but the taillights have more square-like proportions, and they seem to fit more flushly to the body. There also appear to be some cut lines through the taillight area, so there may be more going on under the camouflage than we can see right now. We also get a small glimpse of the interior. It looks like there's a wide screen across much of the dash. It's in keeping with current car design trends, but is a major departure from the retro-inspired design of past Minis. The prototype we see here looks pretty far along in development. With that in mind, along with recent reports, the new model may be launched in 2023. It will likely be accompanied by gas-powered versions, since 2025 is the cut-off date for the last new gas-powered Mini option, and 2030 is the point where the brand will be fully electric. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

BMW i3s traction control tech going in all BMW, Mini cars

The BMW i3s is essentially a warmed-up version of the i3 electric car we all know and love. The performance boost isn't huge — just 14 horsepower and 15 pound-feet of torque — but it also gets a new suspension, wheels and tires as well as an improved traction control system. We found the car to benefit from all the updates when we drove it for our First Drive Review, but now BMW has offered up more details on just how the traction control system of the i3s helps make it better to drive. The company says it'll expand the technology to all future BMW and Mini models as well. The i3s's system is calibrated to help it to pull away quickly from a stop, making full use of the instantaneous torque offered by the electric motor. It also improves stability when accelerating out of corners, when using regenerative braking and, of course, when the road conditions are less than ideal. The results are palpable, and with the other improvements the i3s definitely feels stronger off the line, as we found on our drive. It's also about a half-second quicker to 60 miles per hour, at 6.8 seconds. The secret is in the response time of the stability control, which BMW claims is 50 times faster than the conventional system. This is made possible by moving the control process into the powertrain itself, rather than a remote unit. This reduces the signal path and, thus, the response time of the traction control system. BMW's Head of Chassis Development, Peter Langen, said of it, "With their high levels of torque and instantaneous responses to every movement of the accelerator, electric motors already make significantly higher demands on driving stability systems than conventional power units." While engineered to make the most of the electric motor, BMW says the shorter cycles of this traction control system show promise for internal combustion vehicles as well. As such, we'll begin to see the improved technology applied across the BMW and Mini lineups going forward. Related Video: