2006 Mini Cooper S Loaded 6 Speed Manual on 2040-cars

Auto blog

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.

Mini John Cooper Works GP spied with wide body, big wing

The Mini John Cooper Works GP was just announced to have over 300 horsepower, and we got an early glimpse at it with teaser images. And now one of our spy photographers caught the car with very thin camouflage. The spy photos reveal that the Mini GP is sticking fairly close to the Frankfurt concept, but toning everything down a bit. At the front, the Mini GP clearly is using the current John Cooper Works hardtop front bumper, but it does have deep chin spoiler additions that allude to the GP concept's massive splitter. The grille has been revised, and the gloss black lower sections are now made of a matte black mesh design. The slot in the middle could have red accents on each side like the red stripe on the concept. The front spoiler blends right in to the new extra-wide fender flares. While the fender extensions don't protrude as far as on the concept, they're otherwise very similar in how they sweep backward at the tops and stand away from the body to allow air to flow through. Something else noticeable from the side are the enormous front brakes. The rotors nearly fill up the wheels, and the calipers look really beefy. The five-spoke wheels on this prototype will be replaced by GP-signature four-spoke wheels as revealed by teaser shots. The back of the GP looks about how we would imagine it. The split rear wing is roughly the same shape as the concept's, but a little narrower. The bumper has a big diffuser area that doesn't necessarily look functional, but should at least look cool. The rear exhaust tips look bigger than normal Mini John Cooper Works models. The Mini GP will go into production in 2020. Only 3,000 examples will be built. We suspect the GP will use the same turbocharged 2.0-liter four-cylinder engine as the BMW X2 35i, which makes 306 horsepower and 332 pound-feet of torque. Coupled with weight savings, possibly involving a rear seat deletion, and upgraded suspension, and this should be a shockingly fast Mini. Related Video:

Mini STRIP gets Paul Smith's help with graceful sustainability

For the 40th anniversary of the original Mini in 1999, British designer Paul Smith created a vintage two-door Mini overlaid with the multicolored stripes he's known for. You can buy still buy a set of his "Artist Stripe" Mini-Car Cufflinks at the Paul Smith site. For Mini's newest collaboration with the knighted Royal Designer for Industry, the partnership dropped the "e" from "stripe" to create the one-off Mini STRIP concept. Given the tagline "Sustainable design with a twist," if you wanted to show off the possibility of combining high design with unprocessed, renewable materials, the Mini STRIP is a sensational way to do it.  The project started with the steel bodyshell of a battery-electric Mini Cooper SE. Everything added to the shell needed to satisfy the themes of simplicity, transparency, and sustainability, which meant eliminating anything that could be eliminated, and rethinking the materials and forms of the rest. Outside, the STRIP bears its naked steel, complete with the grinding marks from the finishing process. There's naught but a layer of transparent paint to shield the metal against corrosion. The duller, contrasting hue in places like the front and rear apron and hood intake are from 3D-printed parts. The grille trim has been fashioned from recycled Perspex, same as the panoramic roof and the aero covers on the wheels. The silver screw heads in the black trim are intended to highlight and ease the process of dismantling the car when it's time for bits to be recycled. The only color outside is a splash of neon green that hides under the charging port cap. The cabin hardware is nothing but the indispensable, lightly trimmed. Smith insisted on painting the steel shell a vivid blue. The instrument panel is a single semi-transparent piece, a smartphone replacing Mini's usual large center gauge. The only switchgear consists of five toggles hanging above the area that's clearly missing its center tunnel. The dash and upper door pads, plus the sun visors, are made from recycled cork without any synthetic filler. The door pulls are wound climbing cord, the door openers made of milled, recyclable aluminum, same as the steering wheel spokes. The seat surfaces and piping are knitted fabric, tying in with mesh panels used on the lower doors, the airbags running along the roof, and the cover over the airbag in the steering wheel. That wheel is wrapped in bicycle tape, a nod to Smith's taste for cycling.