2006 Mini Cooper S Hardtop 1 Owner Vehicle on 2040-cars

Auto blog

Mini STRIP gets Paul Smith's help with graceful sustainability

For the 40th anniversary of the original Mini in 1999, British designer Paul Smith created a vintage two-door Mini overlaid with the multicolored stripes he's known for. You can buy still buy a set of his "Artist Stripe" Mini-Car Cufflinks at the Paul Smith site. For Mini's newest collaboration with the knighted Royal Designer for Industry, the partnership dropped the "e" from "stripe" to create the one-off Mini STRIP concept. Given the tagline "Sustainable design with a twist," if you wanted to show off the possibility of combining high design with unprocessed, renewable materials, the Mini STRIP is a sensational way to do it.  The project started with the steel bodyshell of a battery-electric Mini Cooper SE. Everything added to the shell needed to satisfy the themes of simplicity, transparency, and sustainability, which meant eliminating anything that could be eliminated, and rethinking the materials and forms of the rest. Outside, the STRIP bears its naked steel, complete with the grinding marks from the finishing process. There's naught but a layer of transparent paint to shield the metal against corrosion. The duller, contrasting hue in places like the front and rear apron and hood intake are from 3D-printed parts. The grille trim has been fashioned from recycled Perspex, same as the panoramic roof and the aero covers on the wheels. The silver screw heads in the black trim are intended to highlight and ease the process of dismantling the car when it's time for bits to be recycled. The only color outside is a splash of neon green that hides under the charging port cap. The cabin hardware is nothing but the indispensable, lightly trimmed. Smith insisted on painting the steel shell a vivid blue. The instrument panel is a single semi-transparent piece, a smartphone replacing Mini's usual large center gauge. The only switchgear consists of five toggles hanging above the area that's clearly missing its center tunnel. The dash and upper door pads, plus the sun visors, are made from recycled cork without any synthetic filler. The door pulls are wound climbing cord, the door openers made of milled, recyclable aluminum, same as the steering wheel spokes. The seat surfaces and piping are knitted fabric, tying in with mesh panels used on the lower doors, the airbags running along the roof, and the cover over the airbag in the steering wheel. That wheel is wrapped in bicycle tape, a nod to Smith's taste for cycling.

Next Mini Clubman nearly ready to haul

With the three- and five-door Mini Hardtop models successfully hitting the market and the pending arrival of the hot John Cooper Works model at next week's Detroit Auto Show, Mini can turn its eye toward another important model, in the form of its next-generation Clubman, which our spies have spotted testing on the roads of Germany. Aside from the rear barn doors, the next Clubman looks to have a lot in common with the new five-door Hardtop, which makes sense considering how much the current car has in common with the R56 that it's based upon. That similarity ends quickly once you take a look inside the cabin. The typically open Mini cabin is more dramatically segmented in the new Clubman, with a high transmission tunnel that separates the driver and passenger. In a worrying move for fans of parking lot shenanigans, Mini is moving to an electronic parking brake in its new model, although beyond that, the center stack is similar to the redesign Mini pushed through for this latest generation. As is the case with the current Clubman, the next-gen will likely share its engines and gearboxes with the Hardtop, meaning a base 1.5-liter, three-cylinder turbo in the Cooper Clubman and a 2.0-liter, turbocharged four-cylinder in the Cooper S Clubman. Six-speed transmissions, in both two- and three-pedal varieties, will likely also be offered. Check out our gallery of spy photos of the new Clubman, up at the top of the page.

Mini may not build electric cars in England due to Brexit

BMW will decide whether to build its new electric Mini in Britain or elsewhere by the end of September, its board member for sales told Reuters, in a test of the country's ability to continue to attract investment as it leaves the EU. Mini makes around 70 percent of its approximately 360,000 compact cars at its Oxford plant in southern England but the car industry is concerned about the effect any loss of unfettered access to the EU, its largest export market, could have on plants after Brexit. BMW is deciding between its English site, a plant in the Netherlands where it has built more of its conventional line-up in recent years, and its Germany plants at Leipzig and Regensburg for the new low-emissions variant. The firm's board member for sales told Reuters that the electric Mini investment, likely to be worth tens of millions of pounds, would come in the next three months and the board was currently considering a number of factors including Brexit. "One of the elements is what is the likelihood of a tax regime and if there's a tax regime, how would it apply," Ian Robertson said during an interview at the Goodwood Festival of Speed in southern England. "If you made the motor in a German plant and you then assembled the car in a British plant, and you took the cars back to the German market, then the duty that you would pay would be reclaimed," he said, in an example of the options companies are examining to plan for any duties or tariffs. The automaker is also looking into where the uptake of greener models is strongest and where the best supply chains are, he said. Britain could approve its first major electric battery hub in the next few weeks after officials in central England submitted proposals to ministers in May. But last month, the car industry issued its strongest warning yet on the need for politicians to strike a transitional Brexit deal after two-year talks to ensure unfettered trade is maintained. Uncertainty has also been heightened after a snap June 8 election which left Prime Minister Theresa May without a majority and has led to ministers in her administration hinting at different versions of Britain's likely post-Brexit future. Last year, May's administration helped secure two new models at Japanese carmaker Nissan's plant in the north of England after what a source said was a government promise of extra support to counter any loss of competitiveness caused by Brexit.