2005 Used 1.6l I4 16v Manual Fwd Hatchback Premium on 2040-cars

Auto blog

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.

Mini Cooper SE Convertible wheels made entirely from recycled aluminum

Mini has revealed an interesting fact about its limited-run Mini Cooper SE Convertible: It's the first production car with wheels made from 100% recycled aluminum. Despite sharing the same look as wheels available on the regular SE hatch, they're actually much more environmentally friendly. The wheels were developed with Swiss wheel manufacturer Ronal. The company sells aftermarket wheels under the Ronal and Speedline brands, and it supplies OEMs. And it's no stranger to more environmentally-friendly wheel production. It supplies wheels for the Audi E-Tron GT that are made using a smelting process that produces oxygen rather than carbon dioxide, and it now has a line of claimed carbon-neutral aftermarket wheels. But back to the Mini's wheels. Using all recycled aluminum has the obvious benefit of not requiring new aluminum to be manufactured. But the benefits are greater than just the raw material use. Mini points out that a major improvement in carbon emissions comes from being able to skip the electrolysis process for new aluminum manufacturing. Pure aluminum is extracted from aluminum oxide (which is in turn taken from the mineral bauxite). To do this large amounts of electricity are passed through molten solutions of aluminum oxide and cryolite (which takes energy to heat) across graphite cathodes and annodes. Not only does this use a lot of electricity that has its own carbon costs, the oxygen that separates from the aluminum bonds to the graphite annodes, yielding more carbon dioxide (which is why the production of those Audi wheels is also interesting). In total, Mini says the recycled wheel production reduces carbon emissions by 75%. More specifically, it estimates about 0.16 kilograms (0.35 pounds) per kilogram (2.2 pounds) of aluminum used. Mini also stresses that this process still maintains all the strength of conventional wheels, just in a greener way. And of course, the wheels themselves are recyclable again. Mini, and BMW more broadly, are looking at ways to upscale the process and to source suitable recyclable products, likely other old wheels from cars no longer on the road. Though neither company said anything about when we'll see fully recycled wheels more widely available. Related Video: MINI Electric Pacesetter inside and out

Mini Cooper Next 100 Concept | Autoblog Minute

The Mini Vision Next 100 concept. The futuristic vehicle features is autonomous, has a rear engine layout, a de-cluttered interior, and loads of tech that is aimed at providing drivers and riders with a connected user experience. MINI Autoblog Minute Videos Original Video autos bmw group