2005 Mini Cooper Only 55k Air Conditioning Am/fm/cd Tilt Cruise Save$$$$8,995 on 2040-cars

Auto blog

Mini JCW Convertible spied looking cold

The Mini Convertible John Cooper Works has stripped off almost all of the camo it was wearing when we last saw it a few months back. There's not much left to the imagination anymore, and all that remains are some swirls to hide a little of the hood and rear. As expected, the entire front end, rear bumper, central exhausts and subtly flared wheel arches come directly from the JCW take on the two-door Hardtop. Except for the Convertible's repositioned antenna and lowering top, the two models are essentially the same on the outside. With the standard, third-gen Mini droptop not actually unveiled yet, all of the camouflage at the back is likely there to hide the way the roof folds down. Under the hood, expect the latest JCW 2.0-liter turbocharged four-cylinder producing 228 horsepower and 236 pound-feet of torque with a choice of six-speed manual or automatic gearboxes. Of course, the Convertible also adds the thrill of tipping the throttle with the top down. Mini hasn't hinted at a reveal date for the latest Convertible yet. However, these shots suggest development is at a fairly advanced state, so an official debut is likely not too far off. Related Video:

Mini STRIP gets Paul Smith's help with graceful sustainability

For the 40th anniversary of the original Mini in 1999, British designer Paul Smith created a vintage two-door Mini overlaid with the multicolored stripes he's known for. You can buy still buy a set of his "Artist Stripe" Mini-Car Cufflinks at the Paul Smith site. For Mini's newest collaboration with the knighted Royal Designer for Industry, the partnership dropped the "e" from "stripe" to create the one-off Mini STRIP concept. Given the tagline "Sustainable design with a twist," if you wanted to show off the possibility of combining high design with unprocessed, renewable materials, the Mini STRIP is a sensational way to do it.  The project started with the steel bodyshell of a battery-electric Mini Cooper SE. Everything added to the shell needed to satisfy the themes of simplicity, transparency, and sustainability, which meant eliminating anything that could be eliminated, and rethinking the materials and forms of the rest. Outside, the STRIP bears its naked steel, complete with the grinding marks from the finishing process. There's naught but a layer of transparent paint to shield the metal against corrosion. The duller, contrasting hue in places like the front and rear apron and hood intake are from 3D-printed parts. The grille trim has been fashioned from recycled Perspex, same as the panoramic roof and the aero covers on the wheels. The silver screw heads in the black trim are intended to highlight and ease the process of dismantling the car when it's time for bits to be recycled. The only color outside is a splash of neon green that hides under the charging port cap. The cabin hardware is nothing but the indispensable, lightly trimmed. Smith insisted on painting the steel shell a vivid blue. The instrument panel is a single semi-transparent piece, a smartphone replacing Mini's usual large center gauge. The only switchgear consists of five toggles hanging above the area that's clearly missing its center tunnel. The dash and upper door pads, plus the sun visors, are made from recycled cork without any synthetic filler. The door pulls are wound climbing cord, the door openers made of milled, recyclable aluminum, same as the steering wheel spokes. The seat surfaces and piping are knitted fabric, tying in with mesh panels used on the lower doors, the airbags running along the roof, and the cover over the airbag in the steering wheel. That wheel is wrapped in bicycle tape, a nod to Smith's taste for cycling.

2021 Mini Countryman spied wearing a subtle change of clothes

Mini isn’t taking its crossover lineup anywhere but forward these days, and a facelift for the tall Countryman appears to be next in line. We got details for the hot JCW version of the Countryman a couple of months back, but a mid-cycle refresh is on the docket for the regular version now. Spy photos of the refreshed Countryman show all the exterior changes will be coming to the front and rear portions of the car. Everything else about the long and wide Mini is staying the same, but we could see some interior improvements in the name of technology. As for whatÂ’s visible through the camouflage, the Countryman doesnÂ’t appear to be going through anything radical in the front or back. The grille looks like itÂ’s taking on the same shape as the current Countryman. However, a few minor changes to the lower front bumper are noticeable. Mini looks to be changing up the vents/intake design down there. We donÂ’t mind the carÂ’s current design, but this doesnÂ’t seem to be changing much anyway. The most obvious change out back is the carÂ’s taillight design. ItÂ’s a different pattern on the curvy red light element, but itÂ’s not a Union Jack flag. Perhaps Mini will ultimately tack the Union Jack on it, but this prototype doesnÂ’t wear the British pride on its hindquarters.  Perhaps the big takeaway here is more about the lack of changes Mini appears to have in store. WeÂ’ll be hoping the upgrade is heavy on tech and new features rather than actual design changes. The Countryman went through a radical (large) rebirth for the 2017 model year, but hasnÂ’t exactly lit the world on fire with sales since. Last year was the modelÂ’s best year since 2014, but itÂ’s still behind the modelÂ’s all-time best-selling years. WeÂ’ll expect this light refresh to hit us for the 2021 Countryman, so a reveal sometime next year is likely.