2009 - Mini Cooper S on 2040-cars

Auto blog

British company announces turn-key EV conversion kit for classic Mini

Swindon Powertrain unveiled a turn-key EV conversion kit that makes electrifying a Mini built between 1959 and 2000 relatively easy. It bridges the gap between the original model and the Cooper SE released earlier in 2020. Available in December 2020, the kit consists of an electric motor mounted on a modified Mini front subframe, and purpose-designed inner CV joint housings designed to work with regular-production half shafts. Swindon notes no modifications are required; installing the kit requires removing the original front subframe, probably selling the stock engine and the transmission in the local classifieds, and bolting the new subframe to the Mini's body. Rated at 107 continuous horsepower, but programmed to offer a peak output of 160 horsepower, the motor spins the front wheels via a single-speed transmission, which seemingly settles the debate over magic wand, direct, and remote gear changes. It offers more power than any four-cylinder fitted to the Mini by the factory. After tightening the subframe bolts, owners need to source additional powertrain components, like the battery pack, the motor controller, the on-board charger, and the DC-DC converter. All of these parts are available directly from Swindon Powertrains, or from a growing list of aftermarket vendors, but they're not included in the kit. Electric technology isn't cheap, and Swindon's kit is no exception. It's priced at GBP8,850 (about $11,500) before taxes and shipping enter the equation, meaning it's more expensive than rebuilding an original four-cylinder engine. Viewed in this light, electrification is better suited to some of the high-zoot custom builds (like the stunning Remastered available from David Brown Automotive) priced in the six digits than to a beater 1980s City model.

The 2017 Porsche 911 RSR goes mid-engine, purists be damned

Porsche unveiled its World Endurance Championship and IMSA WeatherTech Championship competitor with the 2017 911 RSR. And this 911 is different from the rest, as the 4.0-liter flat-six engine powering this beast is in front of the rear axle, not behind it. That's right, this 24 Hours of Le Mans competitor ditches the iconic rear-engine layout. Porsche isn't talking specifics on how exactly things are arranged back there. The engine is new, now based on the 991 911's block instead of the previous Mezger motor that's been used for years. The transmission design is new as well – it would have to be to accommodate the new location relative to the engine. The racecar has been engineered to meet the LM-GTE class, where it will go up against other mid-engine cars like the Ford GT and Ferrari 488 GTE. Moving the engine to the middle has given Porsche the ability to fit the 911 RSR with massive bits of aero, like the humongous rear diffuser that looks like it would be more at home on a machine of war. The only thing that can compete with the diffuser for size is the top-mounted rear wing, which shares a similar design to the one found on the 919 Hybrid. Going back to the engine, the direct-injected boxer motor, depending on the size of the restrictor, generates as much as 510 horsepower and sends all of its fury to the rear wheels. The engine is paired to a six-speed sequential gearbox, which drivers can employ through paddles on the steering wheel. The new engine doesn't have a lot of weight to push around as the 911 RSR, as required by regulations, weighs 2,740 pounds. Speaking of weight, the engine layout isn't the only change for the 911 RSR. For 2017, the car ditches its steel body for one that's made out of carbon fiber. The body attaches to the chassis via quick-release fasteners, making the vehicle easier to service as exterior elements can be removed with minimal effort. The racecar also gets a radar-based collision system – aptly named the "Collision Avoid System" – which is meant to limit the 911 RSR's encounters with faster LMP prototypes. Only time will tell if the new layout and aerodynamic components help the 911 RSR beat its competition. But there will be plenty of opportunities to see the racecar in action as Porsche plans to run the 911 RSR in 19 races during the 2017 season, the first of which will take place at the IMSA opener on January 28th at Daytona, where the racecar will make its track day debut.

Mini celebrates 60 years of Cooper with Anniversary Edition Hatch

Sir Alec Issigonis never seriously envisioned the original Mini as a performance car. It was a cheap and cheerful econobox developed as an alternative to the bubble cars that were wildly popular in post-WWII England. Race car engineer John Cooper played a significant role in revealing the Mini's sporty side, and the BMW-owned firm is celebrating the collaboration's 60th anniversary with a limited-edition variant of the Hatch that will be sold globally. Aptly named Anniversary Edition, the commemorative hatchback is available in British Racing Green, Midnight Black or Rebel Green (depending on the version). Regardless of the chosen paint color, the light bezels, the door mirror caps, the door handles and the roof are painted white, while most of the other exterior trim pieces are black. The number "74" appears on the hood and on the doors; it was chosen as a reference to the original Mini, which wore the same number when it earned its first win in a major race. Red accents add a finishing touch to the look. Open the door, and you'll spot edition-specific door sill plates with a Cooper logo. The same design appears on the three-spoke steering wheel, and there's a red ring on the passenger side of the dashboard that's a tribute to the original John Cooper logo. The signatures of John, Mike and Charlie Cooper appear next to the instrument cluster. Mini is not making any major mechanical changes to the Anniversary Edition. The package can be ordered with the standard Cooper, the hotter Cooper S or the spicy John Cooper Works model. In its most powerful configuration, the Hatch offers a turbocharged, 2.0-liter four-cylinder engine that develops 228 horsepower. For context, the original Mini Cooper was powered by a 1.0-liter four-cylinder tuned to develop about 55 horsepower. It could reach a top speed of around 80 mph, and it gained disc brakes (the standard Mini initially settled for drums on both axles).  Only 740 units of the Anniversary Edition Hatch will be built globally. Pricing information hasn't been announced. And, while we know the model is America-bound, there's no word yet on how many will be sent to our shores. We've reached out to the brand, and we'll update this story if we learn more. Cooper's pre-Cooper models Mini launched its first Cooper-tuned model in September 1961, but the collaboration started earlier.