1994 Rover Mini Cooper 1.3l on 2040-cars

Auto blog

2022 Mini Hardtop spied with bigger grille

The current generation of Mini Hardtop and Convertible has been around since 2014, so it doesn't come as a big surprise that one of our spy photographers spotted a group of test cars sporting refreshed styling. These cars were all Mini Cooper S or Mini John Cooper Works models, and the mild styling tweaks make us believe these updates will be applied to the 2022 Mini Hardtop and Convertible lines, with small changes for different trims. One shot of a few Minis shows one of them wearing no camouflage at all. While the angle isn't ideal, there's still plenty we can make out. It appears to be a John Cooper Works based on the particularly large lower and outboard grilles. It seems to have a John Cooper Works badge in the side of the grille with black tape over it, too. The main grille is noticeably larger than that of the current model. It also adopts a mesh pattern over the whole surface. There's still a bar dividing the grille, but the division is less distinct than on the current car. We can also see this version gets a pronounced front splitter. The other cars in these shots have more thoroughly disguised front and rear ends. The larger main grille does seem to show through, as well as more lower grille area. At the back, the updated Mini has a wider diffuser area, and immediately above it is a set of vents that span the same width. This seems to be a John Cooper Works since it looks fairly aggressive with large center exhaust tips. The regular Hardtop and Convertible models will probably have more toned down versions of this bumper without the center exhaust. Since these are relatively minor styling updates, we expect them to show up on the 2022 Hardtop and Convertible variants. They could be accompanied by powertrain and feature changes, too. In fact, reports have said that there could be a smaller Hardtop model that's electric-only coming around 2022, with this refreshed version sticking around for a few years during the transition. Related Video:    

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.

2014 Mini John Cooper Works Countryman All4

The standard Mini Countryman is a bit of an odd duck against the backdrop of 'normal' small crossovers like the Mazda CX-5 and the Ford Escape, but I sort of get it. Apply the same winning Mini formula to a CUV, and you get a smaller-than-average entry in the segment, one that is far more entertaining to drive than the norm, more stylish inside and out and pretty expensive when cross-shopped. That list of qualities doesn't appeal to all crossover shoppers, sure, but it intrigues a big enough list that the Countryman has reason for being.
Now, add the expensive John Cooper Works package to the Countryman's already niche goodies list, and Mini starts to lose me. So, I'm getting the softer suspended, taller, generally less dynamically joyful version of the brand's core values, but now you're charging me at least $35,000 ($13k more expensive than the basic, front-drive Cooper Countryman and $7k more than the MSRP of the Cooper S All4 version)? What's that? You're going to make it look like a garish, tippy-toed tuner car in the process? Take my money.
Or, actually, let me keep it. I can swing with a lot of the weirdness that Mini has to offer, but this car pushed me past my limit.