2015 Mini Cooper S on 2040-cars

Auto blog

Mini reveals it's developing an electric John Cooper Works model

We at Autoblog are extremely fond of the Mini Cooper SE electric car. So we're also excited to learn that Mini is also developing an electric John Cooper Works model. Unfortunately, that's all Mini has actually said about a future electric John Cooper Works model: that it's in development. Anything else about it, such as how hardcore it will be, or what motor it will use, is entirely up for speculation. All we have to go on are photos of the prototype. From the looks of it, the prototype is simply a Mini John Cooper Works (JCW) GP, but with an electric powertrain. The entire body, even the giant wing and funky fender flares, is the same as the uncompromising GP, except for the grille. The grille is the mostly solid example used on the Cooper SE. There aren't any tailpipes on this car either, for obvious reasons. This certainly suggests Mini is planning a mean electric JCW, and not just a slightly stiffer upgrade from the S/SE models. It raises big questions about the motor, though. The gas-powered GP is the most powerful production Mini in history with over 300 horsepower. Only one BMW motor has been used in a Mini so far: the base i3 motor, which makes 181 horsepower. The i3s has a punchier motor that makes 195 horsepower that would probably drop in easily, but it wouldn't seem powerful enough for a GP-type car. Perhaps the iX3's motor, which makes 286 horsepower, could fit? It would certainly be near enough to the GP's engine. Maybe even one of the motors from the dual-motor, 500-horsepower BMW iX would do the job? We'll just have to wait and see, and it's hard to say just how long, since Mini gave no information on reveals. Hopefully it won't be too long if the company is testing minimally camouflaged electric GP prototypes. Related Video:  

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.

Cargo ship carrying 1,200 Jaguars and Land Rovers deliberately run aground [w/video]

A cargo ship carrying a load of new cars out of Southampton has run aground in the English Channel in between England and the Isle of Wight. The vessel apparently suffered some sort of failure just 45 minutes after leaving port that caused it to list heavily to the starboard side before the crew deliberately beached it on Bramble Bank to prevent the ship from capsizing altogether. The vessel, called the Hoegh Osaka, is a 590-foot car carrier weighing some 57,000 tons and registered in Singapore. Although several automakers (including Honda and Bentley) were reportedly looking into whether they had cars on board, the vessel is said to have been filled to approximately one-third its capacity, with 1,400 vehicles on board – including 1,200 Jaguar and Land Rover vehicles, 65 Mini models and one Rolls-Royce Wraith. 70 to 80 pieces of construction equipment were also said to be on board. The Hoegh Osaka was en route from the southern British port of Southampton to Bremerhaven, Germany. Fortunately, no major injuries have been reported. The crew was mostly airlifted by helicopter off of the beached ship, with two crew members evacuated by lifeboat. One crew member reportedly jumped over 25 feet off the ship into the water before being immediately retrieved by rescue workers. According to the Daily Mail, two crew members were treated for non-life-threatening injuries, including a broken leg. It may take several days, if not longer, to extract the vessel from the sand bank and ascertain the damage to the ship and its cargo. An early attempt to free the ship with tugboats failed, meaning that the Maritime and Coastguard Agency may have to wait until more favorable high tides to try again before towing the ship back into the port. Bramble Bank, where the vessel was run aground, is a well-known obstacle to maritime navigators. The Queen Elizabeth 2 ran aground there in November 2008 with 1,700 passengers on board, but was quickly freed by four tugboats and was able to continue on its way. Two local yacht clubs also play a cricket match there every year at low tide. The vessel's operator, Hoegh Autoliners, praised the skill and quick thinking of the crew in acting to prevent the ship's capsizing by running her aground on the soft, sandy shoal. Watch the clip below for aerial footage of the beached ship, courtesy of the BBC. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.