Wmwzc3c59bwl80539 Mini Countryman S Fully Loaded on 2040-cars

Auto blog

Mini STRIP gets Paul Smith's help with graceful sustainability

For the 40th anniversary of the original Mini in 1999, British designer Paul Smith created a vintage two-door Mini overlaid with the multicolored stripes he's known for. You can buy still buy a set of his "Artist Stripe" Mini-Car Cufflinks at the Paul Smith site. For Mini's newest collaboration with the knighted Royal Designer for Industry, the partnership dropped the "e" from "stripe" to create the one-off Mini STRIP concept. Given the tagline "Sustainable design with a twist," if you wanted to show off the possibility of combining high design with unprocessed, renewable materials, the Mini STRIP is a sensational way to do it.  The project started with the steel bodyshell of a battery-electric Mini Cooper SE. Everything added to the shell needed to satisfy the themes of simplicity, transparency, and sustainability, which meant eliminating anything that could be eliminated, and rethinking the materials and forms of the rest. Outside, the STRIP bears its naked steel, complete with the grinding marks from the finishing process. There's naught but a layer of transparent paint to shield the metal against corrosion. The duller, contrasting hue in places like the front and rear apron and hood intake are from 3D-printed parts. The grille trim has been fashioned from recycled Perspex, same as the panoramic roof and the aero covers on the wheels. The silver screw heads in the black trim are intended to highlight and ease the process of dismantling the car when it's time for bits to be recycled. The only color outside is a splash of neon green that hides under the charging port cap. The cabin hardware is nothing but the indispensable, lightly trimmed. Smith insisted on painting the steel shell a vivid blue. The instrument panel is a single semi-transparent piece, a smartphone replacing Mini's usual large center gauge. The only switchgear consists of five toggles hanging above the area that's clearly missing its center tunnel. The dash and upper door pads, plus the sun visors, are made from recycled cork without any synthetic filler. The door pulls are wound climbing cord, the door openers made of milled, recyclable aluminum, same as the steering wheel spokes. The seat surfaces and piping are knitted fabric, tying in with mesh panels used on the lower doors, the airbags running along the roof, and the cover over the airbag in the steering wheel. That wheel is wrapped in bicycle tape, a nod to Smith's taste for cycling.

Mini Superleggera patent renderings suggest production prospects

Mini impressed us all when it revealed the Superleggera Vision concept at the Paris Motor Show a couple of months ago. But even before the little roadster concept debuted, there were already rumors of its production potential. And those rumors are only being further entrenched by the emergence of a series of patent renderings. Bearing much more than a passing resemblance to the concept, these images show what could be a revised, production version of the Superleggera, though not without its concessions to reality. For one thing, it looks like it's got a proper framed windshield, but it's hard to tell with the roof in place – something we never saw on the concept, either. It's also got more substantial wing mirrors, but the fin on the rear deck is still there, as are the extractor vents on the hood. We also note that the grille openings are the same shape as the concept's. Of course, the emergence of these images and their filing with the relevant authorities doesn't necessarily mean that Mini is moving ahead with the roadster's production. But if it did, it would likely ditch the concept's electric powertrain, and could stand to fill the void left by the discontinuation of the maligned, outgoing Mini Roadster that was essentially a scrunched Cabriolet with a cowling where the rear seats and stacked roof would be. Parent company BMW is likely taking into account that its rival Daimler didn't have much luck when it slotted a unique roadster of its own into the Smart lineup, so here's hoping that if it does give the Superleggera the green light, it'll have more success in the marketplace.

Utah man builds iRacing simulator inside 2005 Mini Cooper S

Brent Cheney is an artist and part-time racer who used to own a tuning shop for time attack cars. That's why, when he decided to get into iRacing and wanted an immersive simulator, he wouldn't settle for mere technical excellence. As first covered by Salt Lake City's KSL news, then in more detail by Motor Authority, Cheney decided he wanted to cut a car into pieces, and rebuild it in the basement of his Salt Lake City, Utah house with a racing sim inside. He needed "the right aesthetic," ruling out something like a Toyota Corolla, but he refused the sacrilege of cutting up anything too precious to an enthusiast. After narrowly missing out on buying a 1999 BMW M3 convertible, then turning to a Mitsubishi Eclipse done up in splashy green like Brian O'Conner's car in the original "Fast and Furious," he ended up with a Mini Cooper. The Brit was a better choice than the German and the Japanese, in fact, thanks to a hardtop that would create a dark enclosure, and seams and shutlines in the right places to hide the necessary cuts.  Cheney found a 2005 Cooper S that had been junked over an engine issue, getting the coupe for $1,000 and parting out the internals he didn't need for the same $1,000 he paid. After watching a YouTube video on how to cut a car, he dismembered the Cooper into seven pieces with a cordless reciprocating saw wielding a Diablo Steel Demon 6-inch blade, and carried the pieces into his man cave. He reassembled those pieces on a wood base with the aid of 200 brackets and many more sheetmetal screws, nuts, and bolts. Once the car was put back together, body parts and trim pieces hid all the seams. Before reinstalling the interior, the artist laid in the sim equipment. After doubling the minimum requirements for iRacing, Cheney's system included an Intel Core i9 8-core processor NVIDIA GeForce RTX 2080 8 GB Founders Edition video card running Windows 10 inside a Thermaltake PC case under the Cooper S hood, as the new "engine." A Fanatec Podium DD1 direct-drive steering column and wheel and Fanatec V3 pedals went in the cabin, along with a Harman Kardon home theater 5.1 surround sound system. He mounted the wheel on the Mini's steering column with a fabricated adapter, put the Fanatec pedals where the car's pedals had been, put a ButtKicker Mini transducer in the original Mini seat for extra realism, and hid all the wiring beneath the carpet and interior trim components.