Fwd 4dr S Low Miles Sedan Manual Gasoline 1.6l 4 Cyl Red on 2040-cars

Auto blog

2020 Mini E spy photos reveal its interior

The 2020 Mini E electric hatchback has been spied once again. It doesn't reveal much on the outside, in fact it actually shows less than the last time, since this one doesn't have the groovy concept-inspired wheels. But our spy photographer managed to get a good shot of the interior, which reveals some neat details. Chief among the interior's changes is the instrument panel on the steering column. While current gasoline-powered Minis have a typical needle-and-dial set of gauges on the column, those have been replaced by a thin screen. In an effort to keep it from looking too out of place, it has semi-circle ends and a chrome ring around the screen. Odds are that the actual screen will likely be in the middle, and additional warning and indicator lights will fill up the circular ends. Other than the screen, the only other major change is the shifter. Instead of the round leather knob of conventional automatic Minis, it has a more rectangular knob made entirely of plastic. The rest of the Mini's interior is like any other current model. The vents, controls and infotainment are all taken right from the other Minis. Interestingly, this Mini E has carbon fiber interior trim. This will probably be an option, not standard equipment. We expect the electric Mini Hardtop will make its debut sometime next year. If we're lucky, it may make the same 204 horsepower and 162 pound-feet of torque as the original Mini E and more than that car's 150 mile range. Related Video:

2020 Mini John Cooper Works Clubman, Countryman crack 300 horsepower

Mini got our attention a few months ago when it announced the upcoming Mini John Cooper Works GP would get over 300 horsepower. But apparently Mini's ultimate hot hatch isn't the only car getting a major power infusion, as the company announced the 2020 Mini John Cooper Works Clubman and Countryman are both getting 300-horsepower engines. Specifically, they'll make 301 horsepower each along with 331 pound-feet of torque from a revised 2.0-liter inline-four. That engine features a stronger crankshaft, new pistons and rods and a lower compression ratio to handle extra boost. All the power is sent through a standard all-wheel-drive system that comes with a mechanical limited-slip differential up front. Like past all-wheel-drive Minis, the system mainly operates in front-drive mode until slippage is detected, at which point power goes to the rear. The all-wheel-drive system has been beefed up with stronger gears and rear axles. Launch control is a standard feature, too. Also standard, a bit disappointingly, is an eight-speed automatic transmission. No manual will be offered on these models. Hopefully manuals will still be offered on later JCW Hardtop and Convertible models. These engine and drivetrain changes help the Clubman and Countryman improve their 0-to-60 mph times by about 1.5 seconds. The Clubman now gets to 60 mph in 4.9 seconds, and the Countryman in 5.1 seconds. Both Minis are the first to be given a 155-mph electronic speed limiter, too. Previous models didn't have enough power to reach that mark. Mini John Cooper Works Countryman View 4 Photos Mini also made some upgrades in the handling and stopping departments. Both models get additional chassis bracing along with small suspension revisions. A package with electronically adjustable shocks is available. The rear brakes now feature fixed four-piston calipers. Front brake rotors are 14.2 inches in diameter, while the rears are 13 inches. Despite these major mechanical upgrades, visual changes are extremely subtle. The Clubman has a different main grille insert and the new Union Jack taillights, but the Countryman is effectively identical to the current model. The interiors on each are basically unchanged as well. Pricing and availability have not been announced yet. Since large portions of the vehicles are shared with the current model, we would expect to see them go on sale at least within the year, possibly in the next few months. Prices likely won't change too much from the current model year.

Mini STRIP gets Paul Smith's help with graceful sustainability

For the 40th anniversary of the original Mini in 1999, British designer Paul Smith created a vintage two-door Mini overlaid with the multicolored stripes he's known for. You can buy still buy a set of his "Artist Stripe" Mini-Car Cufflinks at the Paul Smith site. For Mini's newest collaboration with the knighted Royal Designer for Industry, the partnership dropped the "e" from "stripe" to create the one-off Mini STRIP concept. Given the tagline "Sustainable design with a twist," if you wanted to show off the possibility of combining high design with unprocessed, renewable materials, the Mini STRIP is a sensational way to do it.  The project started with the steel bodyshell of a battery-electric Mini Cooper SE. Everything added to the shell needed to satisfy the themes of simplicity, transparency, and sustainability, which meant eliminating anything that could be eliminated, and rethinking the materials and forms of the rest. Outside, the STRIP bears its naked steel, complete with the grinding marks from the finishing process. There's naught but a layer of transparent paint to shield the metal against corrosion. The duller, contrasting hue in places like the front and rear apron and hood intake are from 3D-printed parts. The grille trim has been fashioned from recycled Perspex, same as the panoramic roof and the aero covers on the wheels. The silver screw heads in the black trim are intended to highlight and ease the process of dismantling the car when it's time for bits to be recycled. The only color outside is a splash of neon green that hides under the charging port cap. The cabin hardware is nothing but the indispensable, lightly trimmed. Smith insisted on painting the steel shell a vivid blue. The instrument panel is a single semi-transparent piece, a smartphone replacing Mini's usual large center gauge. The only switchgear consists of five toggles hanging above the area that's clearly missing its center tunnel. The dash and upper door pads, plus the sun visors, are made from recycled cork without any synthetic filler. The door pulls are wound climbing cord, the door openers made of milled, recyclable aluminum, same as the steering wheel spokes. The seat surfaces and piping are knitted fabric, tying in with mesh panels used on the lower doors, the airbags running along the roof, and the cover over the airbag in the steering wheel. That wheel is wrapped in bicycle tape, a nod to Smith's taste for cycling.