2012 Mini Cooper Countryman S on 2040-cars

Auto blog

Mini John Cooper Works GP spied with wide body, big wing

The Mini John Cooper Works GP was just announced to have over 300 horsepower, and we got an early glimpse at it with teaser images. And now one of our spy photographers caught the car with very thin camouflage. The spy photos reveal that the Mini GP is sticking fairly close to the Frankfurt concept, but toning everything down a bit. At the front, the Mini GP clearly is using the current John Cooper Works hardtop front bumper, but it does have deep chin spoiler additions that allude to the GP concept's massive splitter. The grille has been revised, and the gloss black lower sections are now made of a matte black mesh design. The slot in the middle could have red accents on each side like the red stripe on the concept. The front spoiler blends right in to the new extra-wide fender flares. While the fender extensions don't protrude as far as on the concept, they're otherwise very similar in how they sweep backward at the tops and stand away from the body to allow air to flow through. Something else noticeable from the side are the enormous front brakes. The rotors nearly fill up the wheels, and the calipers look really beefy. The five-spoke wheels on this prototype will be replaced by GP-signature four-spoke wheels as revealed by teaser shots. The back of the GP looks about how we would imagine it. The split rear wing is roughly the same shape as the concept's, but a little narrower. The bumper has a big diffuser area that doesn't necessarily look functional, but should at least look cool. The rear exhaust tips look bigger than normal Mini John Cooper Works models. The Mini GP will go into production in 2020. Only 3,000 examples will be built. We suspect the GP will use the same turbocharged 2.0-liter four-cylinder engine as the BMW X2 35i, which makes 306 horsepower and 332 pound-feet of torque. Coupled with weight savings, possibly involving a rear seat deletion, and upgraded suspension, and this should be a shockingly fast Mini. Related Video:

Mini JCW Convertible spied looking cold

The Mini Convertible John Cooper Works has stripped off almost all of the camo it was wearing when we last saw it a few months back. There's not much left to the imagination anymore, and all that remains are some swirls to hide a little of the hood and rear. As expected, the entire front end, rear bumper, central exhausts and subtly flared wheel arches come directly from the JCW take on the two-door Hardtop. Except for the Convertible's repositioned antenna and lowering top, the two models are essentially the same on the outside. With the standard, third-gen Mini droptop not actually unveiled yet, all of the camouflage at the back is likely there to hide the way the roof folds down. Under the hood, expect the latest JCW 2.0-liter turbocharged four-cylinder producing 228 horsepower and 236 pound-feet of torque with a choice of six-speed manual or automatic gearboxes. Of course, the Convertible also adds the thrill of tipping the throttle with the top down. Mini hasn't hinted at a reveal date for the latest Convertible yet. However, these shots suggest development is at a fairly advanced state, so an official debut is likely not too far off. Related Video:

Mini John Cooper Works GP will have over 300 horsepower

The Mini John Cooper Works GP concept from the 2017 Frankfurt Motor Show was one extreme-looking vehicle, and we now know it's because the real one will, in fact, be really extreme. The company announced that the production car will be the most powerful Mini with over 300 horsepower. In fact, it will be the most powerful Mini by a large margin, as the most potent models so far have only made 228 horsepower. And of course, it will be within striking distance of equally widened and winged cars such as the Civic Type R and Focus RS. Exact numbers haven't been revealed yet, but we wouldn't be surprised if it uses the same turbo 2.0-liter four-cylinder from the BMW X2 M35i, which makes 306 horsepower and 332 pound-feet of torque. In fact, the engine would be ideal, since the X2 is front-drive based and shares underpinnings and less-powerful engines with existing Mini products. The X2 M35i is also all-wheel-drive, which naturally brings up the idea of the GP also powering all four wheels, but Mini might choose to stay with front drive to reduce complexity and weight. Sticking with front drive would also mean that Mini could challenge the Civic Type R's record Nurburgring lap. It looks like the spirit of the concept's design will make it to production, too. The teaser images Mini released show a pretty wild looking split wing that's just a bit narrower and missing some of the concept's extraneous fins. We can also just make out fat fender flares, a big rear diffuser, and the GP's trademark four-spoke wheels. The Mini John Cooper Works GP will go into production in 2020, and Mini will only be building 3,000 examples. That's a low number, but it is more than the 2,000 units of the two previous GP generations. And considering the high output and low production, the GP will undoubtedly be a pricey hot hatch. Related Video: