Manual Convertible 1.6l Cd Front Wheel Drive Tires - Front All-season Abs A/c on 2040-cars

Auto blog

Mini 'Takes the States' is ready to rally again this summer

The Mini brand has gone to great lengths — literally — during the past two decades to embrace and entertain its loyal following by sponsoring cross-country caravans to celebrate its products and customers. This summer, the caravan reforms once again. Officially called “Mini Takes the States,” the rally in mid-July is scheduled to embark from Albuquerque, N.M., and finish eight days later in Seattle. Visiting five states and nine cities, several hundred drivers and their passengers are expected to join the caravan for part or all of the journey. MTTS, as it's become known as to Mini fans, first rolled out in 2006, with Mini USA using it as a way to celebrate the introduction of the first, hardcore GP edition of its high-performance John Cooper Works model. It has since become a biennial event, with each rally taking a different route around the U.S. It's not competitive. The idea is to connect Mini owners and let them share their enthusiasm about the brand and their experiences with it. Mini plans festivities along the route and usually a “Rally Finale” on the final evening. As far as expenses — hotels, most meals — participants are on their own, although breakfasts and some evening events with food are provided by Mini. The idea is to create positive publicity and “good feelings” for the brand, and to sell more Minis. Since Minis are, at the end of the day, automobiles, service may be required along the MTTS route. Technicians are on hand to perform repairs like engine computer diagnostics, light bulb replacements, tire changes, and other non-major work. Participants will initially head north from New Mexico through Colorado and Utah to Salt Lake City. Continuing through Big Sky country, MTTS 2024 will stop in Bozeman and Missoula, Mont., then head west to Spokane, Wash. From there, drivers will cruise southwest through the scenic mountains and valleys of Yakima, Wash., winding up in Seattle. “WeÂ’re excited to reconnect with our Mini owners nationwide to foster current relationships, forge new friendships and make lasting memories, this time in some of our incredible and majestic western states,” said Mike Peyton, vice president and "chief motorer" for Mini of the Americas, in a press release.

The 2017 Porsche 911 RSR goes mid-engine, purists be damned

Porsche unveiled its World Endurance Championship and IMSA WeatherTech Championship competitor with the 2017 911 RSR. And this 911 is different from the rest, as the 4.0-liter flat-six engine powering this beast is in front of the rear axle, not behind it. That's right, this 24 Hours of Le Mans competitor ditches the iconic rear-engine layout. Porsche isn't talking specifics on how exactly things are arranged back there. The engine is new, now based on the 991 911's block instead of the previous Mezger motor that's been used for years. The transmission design is new as well – it would have to be to accommodate the new location relative to the engine. The racecar has been engineered to meet the LM-GTE class, where it will go up against other mid-engine cars like the Ford GT and Ferrari 488 GTE. Moving the engine to the middle has given Porsche the ability to fit the 911 RSR with massive bits of aero, like the humongous rear diffuser that looks like it would be more at home on a machine of war. The only thing that can compete with the diffuser for size is the top-mounted rear wing, which shares a similar design to the one found on the 919 Hybrid. Going back to the engine, the direct-injected boxer motor, depending on the size of the restrictor, generates as much as 510 horsepower and sends all of its fury to the rear wheels. The engine is paired to a six-speed sequential gearbox, which drivers can employ through paddles on the steering wheel. The new engine doesn't have a lot of weight to push around as the 911 RSR, as required by regulations, weighs 2,740 pounds. Speaking of weight, the engine layout isn't the only change for the 911 RSR. For 2017, the car ditches its steel body for one that's made out of carbon fiber. The body attaches to the chassis via quick-release fasteners, making the vehicle easier to service as exterior elements can be removed with minimal effort. The racecar also gets a radar-based collision system – aptly named the "Collision Avoid System" – which is meant to limit the 911 RSR's encounters with faster LMP prototypes. Only time will tell if the new layout and aerodynamic components help the 911 RSR beat its competition. But there will be plenty of opportunities to see the racecar in action as Porsche plans to run the 911 RSR in 19 races during the 2017 season, the first of which will take place at the IMSA opener on January 28th at Daytona, where the racecar will make its track day debut.

Mini Clubman to get the 'Works,' four-door Hardtop not so much

Performance sub-brands are expanding faster than leftover marshmallow Peeps in a microwave. And Mini's John Cooper Works line is not likely to be an exception. Mini's stand at the New York Auto Show was somewhat low-key, with the debut of the Clubman All4 all-wheel-drive variant on one end and the expected John Cooper Works Convertible on the other. And for the foreseeable future, the Mini lineup will change through redesigns of existing models and the introduction of more derivatives – like a John Cooper Works version of the new Clubman. At least that's what some of Mini's product guys indicated. "The Works is always our top model. John Cooper Works is not just limited to small cars, it's also for compact cars," said Ralph Mahler, Mini's head product manager, in an interview with Autoblog at the New York Auto Show. "Therefore, I wouldn't see anything against bringing the Works to the Clubman. I think it would be a perfect match." Though one was offered in the last generation, a Works model may seem at odds with the new Clubman's mission, as the company has spent considerable effort pitching it as the grown-up Mini, something to rival premium-branded compacts. Yet Mahler sees a possible Works Clubman as the ultimate in the lineup and an exclusive model, especially since he said take rate for the rest of the Works Minis is around 5 percent. Patrick McKenna, Head of Product Planning at Mini USA, said that since the Clubman went on sale early this year, ordering has included mostly highly optioned models, and customers are notably cross-shopping the Audi A3. Loaded up, a Clubman Cooper S All4 pushes past the $45,000 mark. Currently, the most powerful Cooper S produces 189 horsepower from its 2.0-liter turbo four. That's more power than a front-drive A3 1.8T, but less than the A3 2.0T Quattro – and way less than a cheaper Volkswagen Golf GTI. Consider that the engine in the just-released John Cooper Works Convertible produces 30 more horses than the one in the Cooper S and a Works Clubman starts to make more sense. Strangely, the four-door Mini Hardtop, released last year, doesn't appear to be destined for the Works treatment. McKenna said the four-door will continue to offer special appearance packages that offer Works-like touches and offer dealer-installed accessories such as exhausts and horsepower increases.