2013 John Cooper Works New Turbo 1.6l I4 16v Manual Hatchback Premium on 2040-cars

Auto blog

2020 Mini John Cooper Works Clubman, Countryman crack 300 horsepower

Mini got our attention a few months ago when it announced the upcoming Mini John Cooper Works GP would get over 300 horsepower. But apparently Mini's ultimate hot hatch isn't the only car getting a major power infusion, as the company announced the 2020 Mini John Cooper Works Clubman and Countryman are both getting 300-horsepower engines. Specifically, they'll make 301 horsepower each along with 331 pound-feet of torque from a revised 2.0-liter inline-four. That engine features a stronger crankshaft, new pistons and rods and a lower compression ratio to handle extra boost. All the power is sent through a standard all-wheel-drive system that comes with a mechanical limited-slip differential up front. Like past all-wheel-drive Minis, the system mainly operates in front-drive mode until slippage is detected, at which point power goes to the rear. The all-wheel-drive system has been beefed up with stronger gears and rear axles. Launch control is a standard feature, too. Also standard, a bit disappointingly, is an eight-speed automatic transmission. No manual will be offered on these models. Hopefully manuals will still be offered on later JCW Hardtop and Convertible models. These engine and drivetrain changes help the Clubman and Countryman improve their 0-to-60 mph times by about 1.5 seconds. The Clubman now gets to 60 mph in 4.9 seconds, and the Countryman in 5.1 seconds. Both Minis are the first to be given a 155-mph electronic speed limiter, too. Previous models didn't have enough power to reach that mark. Mini John Cooper Works Countryman View 4 Photos Mini also made some upgrades in the handling and stopping departments. Both models get additional chassis bracing along with small suspension revisions. A package with electronically adjustable shocks is available. The rear brakes now feature fixed four-piston calipers. Front brake rotors are 14.2 inches in diameter, while the rears are 13 inches. Despite these major mechanical upgrades, visual changes are extremely subtle. The Clubman has a different main grille insert and the new Union Jack taillights, but the Countryman is effectively identical to the current model. The interiors on each are basically unchanged as well. Pricing and availability have not been announced yet. Since large portions of the vehicles are shared with the current model, we would expect to see them go on sale at least within the year, possibly in the next few months. Prices likely won't change too much from the current model year.

British company announces turn-key EV conversion kit for classic Mini

Swindon Powertrain unveiled a turn-key EV conversion kit that makes electrifying a Mini built between 1959 and 2000 relatively easy. It bridges the gap between the original model and the Cooper SE released earlier in 2020. Available in December 2020, the kit consists of an electric motor mounted on a modified Mini front subframe, and purpose-designed inner CV joint housings designed to work with regular-production half shafts. Swindon notes no modifications are required; installing the kit requires removing the original front subframe, probably selling the stock engine and the transmission in the local classifieds, and bolting the new subframe to the Mini's body. Rated at 107 continuous horsepower, but programmed to offer a peak output of 160 horsepower, the motor spins the front wheels via a single-speed transmission, which seemingly settles the debate over magic wand, direct, and remote gear changes. It offers more power than any four-cylinder fitted to the Mini by the factory. After tightening the subframe bolts, owners need to source additional powertrain components, like the battery pack, the motor controller, the on-board charger, and the DC-DC converter. All of these parts are available directly from Swindon Powertrains, or from a growing list of aftermarket vendors, but they're not included in the kit. Electric technology isn't cheap, and Swindon's kit is no exception. It's priced at GBP8,850 (about $11,500) before taxes and shipping enter the equation, meaning it's more expensive than rebuilding an original four-cylinder engine. Viewed in this light, electrification is better suited to some of the high-zoot custom builds (like the stunning Remastered available from David Brown Automotive) priced in the six digits than to a beater 1980s City model.

BMW i1 EV rumored, based on electric Mini

With just two BMW i cars currently available — and aging — we've been hankering to know what new EVs are coming down the pipeline for the Bavarian automaker. We've had news of the iNext and i4, caught wind of an iX3, and as BMW is in the early stages of a large electrification push, there has been a multitude of "i"-prefaced trademarks registered. The next we can expect, if the rumors from Spanish outlet Motor.es are to be believed, will be a diminutive i1 EV, based on the same platform as an upcoming electric Mini Cooper. As such, it would share the electric Mini's front-drive/front-motor configuration — previewed on the Mini Electric Concept, shown above, that debuted at the Frankfurt Motor Show last year. It stands to reason that the i1 would be smaller than the high-roofed i3, possibly borrowing the five-door hatchback format from the 1 Series sold in Europe (which would be a long-awaited dream come true if it made its way to the United States). The electric car would be about a foot shorter than the 1 series, though, according to the report, at about 158 inches long. It would be built on an electric version of BMW modular UKL platform. Keep in mind, the BMW i1 is just a rumor at this point, with Motor.es keeping its sources unnamed. If true, though, it could replace the i3 in BMW's lineup five years from now, in 2023. Related Video: News Source: Motor.es via Motor1 Green Rumormill BMW MINI Hatchback Electric Future Vehicles bmw i mini ev mini cooper ev