2012 Mini Cooper Countryman Fwd 4dr on 2040-cars

Auto blog

Mini Cooper SE Convertible wheels made entirely from recycled aluminum

Mini has revealed an interesting fact about its limited-run Mini Cooper SE Convertible: It's the first production car with wheels made from 100% recycled aluminum. Despite sharing the same look as wheels available on the regular SE hatch, they're actually much more environmentally friendly. The wheels were developed with Swiss wheel manufacturer Ronal. The company sells aftermarket wheels under the Ronal and Speedline brands, and it supplies OEMs. And it's no stranger to more environmentally-friendly wheel production. It supplies wheels for the Audi E-Tron GT that are made using a smelting process that produces oxygen rather than carbon dioxide, and it now has a line of claimed carbon-neutral aftermarket wheels. But back to the Mini's wheels. Using all recycled aluminum has the obvious benefit of not requiring new aluminum to be manufactured. But the benefits are greater than just the raw material use. Mini points out that a major improvement in carbon emissions comes from being able to skip the electrolysis process for new aluminum manufacturing. Pure aluminum is extracted from aluminum oxide (which is in turn taken from the mineral bauxite). To do this large amounts of electricity are passed through molten solutions of aluminum oxide and cryolite (which takes energy to heat) across graphite cathodes and annodes. Not only does this use a lot of electricity that has its own carbon costs, the oxygen that separates from the aluminum bonds to the graphite annodes, yielding more carbon dioxide (which is why the production of those Audi wheels is also interesting). In total, Mini says the recycled wheel production reduces carbon emissions by 75%. More specifically, it estimates about 0.16 kilograms (0.35 pounds) per kilogram (2.2 pounds) of aluminum used. Mini also stresses that this process still maintains all the strength of conventional wheels, just in a greener way. And of course, the wheels themselves are recyclable again. Mini, and BMW more broadly, are looking at ways to upscale the process and to source suitable recyclable products, likely other old wheels from cars no longer on the road. Though neither company said anything about when we'll see fully recycled wheels more widely available. Related Video: MINI Electric Pacesetter inside and out

Spectre Type 10 is a 230-hp, $180,000 mid-engined Mini restomod

Restomodded classic Minis are nothing new, right? A number of reworks swap the original 1.3-liter engine, Honda's VTEC K20 four-cylinder being such a popular replacement that Mini Mania makes a complete swap kit, but the 1.0-liter Ford EcoBoost gets love, too. Some mods replace the engine and move it behind the front seats, a popular option when using the four-cylinder from a Suzuki Hayabusa motorcycle. Some restomods don't do any of that, but just overhaul everything and charge a lot for it, like the David Brown Automotive Mini Remastered that costs around $100,000. As caught by Carscoops, Spectre Vehicle Design out of Vancouver, Canada has done all of the above with its Type 10 Mini restomod, raising the bar for conversions into another dimension. There will only be ten of the Launch Edition Type 10s, and about the only original part left from an original donor hatchback will be the bodyshell. These will be sourced in the same state as the buyer's residence in order to ease the process of vehicle registration. Into that bodyshell, the small Canadian team of enthusiasts has placed a Honda K20 mill with a Haltec engine management system behind the front seats. Shifted through a six-speed gearbox, we're told VTEC kicks in with 230 horsepower at the rear wheels, shunted through a limited-slip differential. In a vehicle reported to weigh 1,700 pounds wet, we're talking serious shove. Committed to keeping the Mini's ten-inch wheels, Spectre designed a new trailing arm suspension to make the package work. Those wheels are three-piece, six-inch-wide, CNC'd aluminum units with staggered offsets and directional spokes to usher hot air away from the four-piston disc brakes.  The cabin looks like a Japanese-infused Mid-Century modern living room, given a touch of carbon fiber and Monica Bellucci. Creative Director Marco Lii patterned the seating aesthetic off a genkan, the foyer area in a Japanese home where one removes ones shoes. The genkan floor is often recessed in relation to a home's main floor, and so it is here in the Type 10. There's a tatami-like mat on the cabin floor, the two interior seats placed on a dais a level above that. The copious light wood and leather interior with chrome accents is understated and gorgeous, everything so well integrated that it takes a moment to recognize the full-cabin roll cage wrapped in stitched leather. The padded center armrest on thin chromed legs looks like a piece in a high-end furniture store.

Mini's not-so-mini Urbanaut minivan concept comes to life

BMW-owned Mini showcased one way it could branch out into new segments when it unveiled the Vision Urbanaut concept in late 2020. At the time, the design study existed merely in a series of digital renderings. It hasn't been approved for production yet, but it was recently transformed into a real concept car that people can experience. Executives argued the idea of an electric Mini minivan isn't as far-fetched as it might sound. "We have developed an idea of how we can take the Mini attributes — as here, with the focus on the clever use of space — into the future of mobility and interpret them in a typically Mini way," said company boss Bernd Korber. Clever use of space was the original Mini's claim to fame thanks in part to an ingenious drivetrain layout, and the Urbanaut takes it to a new level. Longer than a Countryman and shaped like the box it came in, it offers a lounge-like cabin that can be configured in a variety of different ways depending on the number of passengers it's carrying, and whether someone is driving. Mini created three profiles called Chill, Wanderlust, and Vibe, respectively. Chill lets the passengers relax, work, or sleep with minimal distractions while the Urbanaut drives itself. In this mode, the instruments and switches on the dashboard are hidden out of sight to make users feel like they're in a living room, not in a car. Wanderlust allows passengers to choose whether they want to drive or be driven. Vibe may as well be called Party; it configures the Urbanaut's lights and screens to make users feel like they're in a club. Alternatively, users can configure their own driving profile thanks to a feature named My Moment. While the Urbanaut doesn't look like a traditional Mini, it will (hopefully) smell like one. For the first time, Mini is linking its brand identity to a fragrance. We can't convey a smell over the internet, there's not an app for that yet, but we're told it is refreshing and discreet. It's accompanied by a welcome sound that greets users as they enter the cabin. Mini will present the Urbanaut concept to the public for the first time at the Digital-Life-Design (DLD) Summer Conference opening July 1 in Munich, Germany. What happens next hasn't been revealed yet. While we'd be surprised to see it land in showrooms, something like it could zig-zag across major cities in the coming years. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.