2010 Mini Cooper Convertible on 2040-cars

Auto blog

The 2018 Mini John Cooper Works Countryman ALL4 is a hot crossover

With the introduction of the 2018 Mini John Cooper Works Countryman ALL4, Mini has both rounded out its JCW line-up, and created one of the fastest little crossovers out there. The model follows the recently released JCW Clubman, and like that car, the JCW Countryman has a turbocharged 2.0-liter four-cylinder producing 228 horsepower and 258 lb-ft of torque. That puts it solidly ahead of the next sportiest crossover, the 215-horsepower Juke Nismo RS, though it falls short of the monstrous Mercedes-AMG GLA45's 375 horsepower. The JCW Countryman's power is sent to all four wheels through either a standard 6-speed manual or optional 8-speed automatic transmission. Although the automatic has launch control, Mini claims both the manual and automatic JCW Countrymans will reach 60 mph in 6.2 seconds on the way to a top speed of 145 mph. Comparing acceleration times, the Countryman comes up a tenth behind the JCW Cooper, and two tenths behind the JCW Clubman. On top of the extra power, the JCW Countryman gets improvements in the steering and stopping departments. We don't have much detail about the suspension at this point, but it says it has been changed for better handling. The brakes are upgraded to Brembo units, with the front calipers featuring four pistons. You'll be able to spot a JCW Countryman thanks to a few exterior and interior tweaks, too. JCW badges adorn each side of the car, the front bumper eschews fog lights for larger air inlets, and the grille gets a red surround. Mini also offers its Rebel Green paint as well as a Chili Red roof and mirrors, both options that are only available on JCW vehicles. The interior receives JCW sport seats, steering wheel, and shifters, too. The high-performance Countryman will make its public debut at the Shanghai Motor Show and should reach US dealers this April. Mini has not revealed pricing yet, but will likely present it closer to the on-sale date. Related Video:

Meet Vini, the V8-powered second-generation Mini Hardtop

There are several ways to extract horsepower from a Mini Hardtop, and most are far more straight-forward than squeezing a V8 engine under the clamshell hood. And yet, at the request of a client, England-based EDM Racing is well into the process of doubling the retro-styled hatchback's cylinder count while making it rear-wheel drive. Amusingly called Vini, the V8-powered Mini started life as a 2007 Cooper S. It had a little over 100,000 miles on its odometer when David Power, the managing director of suspension bushing expert Powerflex, instructed EDM Racing to prepare it for an improbable engine swap. As mechanics stripped it to the bare metal, Power sourced a 4.0-liter, 415-horsepower V8 and a matching seven-speed automatic transmission from an E92-generation BMW M3 and began figuring out how to make it fit into a city-friendly hatchback delivered new with a 172-horsepower, 1.6-liter four-cylinder engine. Installing the new drivetrain directly behind the front seats would have likely been the easiest solution from a packaging standpoint, but the team decided to keep the front-engined layout. The conversion consequently required chopping out significant chunks of the Hardtop's firewall and floor, so EDM Racing started by designing and welding in a roll cage to maintain the car's structural integrity. The firm then installed modified front and rear subframes from a Subaru Impreza to keep the four wheels in their original position, or as close to it as possible. Power stressed he wants Vini to look nearly stock, especially when it comes to its track width, meaning punching out the wheel arches Renault 5 Turbo-style was out of the question.  The V8 fits surprisingly well in the Mini's engine bay, and it keeps the car's weight distribution in check. Power originally considered using a Subaru-built flat-four or a straight-six from an earlier M3, but both would have put too much weight ahead of the front wheels. Installing the automatic transmission was more difficult, however. "Making it all work in an OEM fashion will be a challenge for sure, but no more so than the most galling part of the project so far: Chopping out a transmission tunnel wide enough to accept the Getrag. I was aware of the dangers associated with cutting too much away and removing integral strength from the shell in the process, hence why we tackled the job in set stages and with the cage [installed]," EDM Racing's Elliott Dunmore explained.

BMW looking to save billions with cost cuts

BMW is planning a fairly extensive overhaul in a bid to recoup some its annual costs, with CEO Norbert Reithofer (pictured above) aiming to save three to four billion euro ($4 to $5.4 billion) per year to help keep the company's profit margins between eight and 10 percent, while also maintaining investments in production expansion and new tech. BMW's profit margins sat at 9.4 percent in 2013.
According to Automotive News Europe, Reithofer is none too pleased about costs at Mini and on the 1 Series, although neither AN nor its source story, from Germany's Manager Magazin, elaborate on what steps could be taken to improve losses on either project. That makes it hard to figure out just where the fat will be trimmed from.
What may happen, though, is that BMW attempts to trim 100 million euros ($135 million) from its German labor costs each year; a solution hinted at a few weeks ago by Germany newspaper Muenchner Merkur. While a dramatic cost reduction, 100 million euros still doesn't begin to even approach the savings envisioned by Reithofer.