1992 Mini Cooper Rover on 2040-cars

Auto blog

Thanks to smaller engines, vehicle dependability falls for first time in 16 years

As automakers have made engines smaller and smaller to improve fuel economy, problems in those vehicles have gotten bigger and bigger. That's the synopsis of a J.D. Power vehicle-dependability study, which found that dependability dropped for the first time in 16 years, largely because the proliferation of four-cylinder engines is causing the vehicles to be less reliable. Specifically, the number of problems per 100 vehicles (or what J.D. Power calls PP100) during the past 12 months for 2011 model-year vehicles rose six percent from the year-earlier figures for 2010 model-year cars. Singling out four-cylinder vehicles revealed about a 10-percent increase in problems during the past year. This issues largely related to engine hesitation, rough transmission shifting and lack of power, signaling the inability of vehicle makers to iron out some of the problems in their smaller engines as they strove for better fuel economy. Six- and five-cylinder engines proved far more reliable. Among car brands, BMW's Mini sub-brand came out as least reliable, with 185 problems per 100 vehicles during the past year. Toyota's Lexus badge was easily the most reliable, with just 68 problems per 100 vehicles. Coming in second place was Mercedes-Benz. The overall average was 133. Check out J.D. Power's press release below. J.D. Power Reports: Increased Engine and Transmission Problems Contribute to Decline in Vehicle Dependability for The First Time in More Than 15 Years General Motors Company Receives Eight Segment Awards, While Toyota Motor Corporation Garners Seven and Honda Motor Company Earns Six WESTLAKE VILLAGE, Calif.: o Owners of 3-year-old vehicles (2011 model year) report more problems than did owners of 3-year-old vehicles last year, according to the J.D. Power 2014 U.S. Vehicle Dependability StudySM (VDS) released today. The study, now in its 25th year, examines problems experienced during the past 12 months by original owners of 2011 model-year vehicles. Overall dependability is determined by the number of problems experienced per 100 vehicles (PP100), with a lower score reflecting higher quality. The study finds that overall vehicle dependability averages 133 PP100, a 6 percent increase in problems from 126 PP100 in 2013. This marks the first time since the 1998 study that the average number of problems has increased. "Until this year, we have seen a continual improvement in vehicle dependability," said David Sargent, vice president of global automotive at J.D.

Why BMW doesn't plan to integrate Apple's iOS in the Car

While watching Apple introduce iOS in the Car during its WWDC keynote on Monday, we wondered how automakers, even the 14 who've already signed up to integrate this new in-car functionality of iOS 7, will feel about having the Cupertino company's mobile operating system supplant their own in-car systems. After all, some OEMs like Ford, General Motors and many luxury automakers have sunk millions of dollars into developing their own advanced infotainment, navigation and communication platforms like MyFord Touch, CUE and older systems like iDrive.
One automaker has now spoken up. A BMW spokeperson was interviewed by someone in the news department of British auto dealer group Arnold Clark and confirmed that the company would not be getting in line to integrate iOS in the Car anytime soon. The reason, as we suspected, is that BMW believes its own products developed over the last decade are both plenty good and already so deeply integrated with other systems of the car that, as told to Arnold Clark, "it would not be that straightforward to start changing all of the architecture of a car as has been implied [by Apple]."
While BMW isn't interested in spending more money to integrate Apple's services and functionality over its own, it has spent a good bit already to integrate iPhone functionality in its cars, including the relatively rare ability to support iPod Out and display Apple's own interface on Mini models with the optional Mini Connected feature, as well as committing to integrate Siri 'Eyes Free' functionality.

Mini Cooper SE Convertible wheels made entirely from recycled aluminum

Mini has revealed an interesting fact about its limited-run Mini Cooper SE Convertible: It's the first production car with wheels made from 100% recycled aluminum. Despite sharing the same look as wheels available on the regular SE hatch, they're actually much more environmentally friendly. The wheels were developed with Swiss wheel manufacturer Ronal. The company sells aftermarket wheels under the Ronal and Speedline brands, and it supplies OEMs. And it's no stranger to more environmentally-friendly wheel production. It supplies wheels for the Audi E-Tron GT that are made using a smelting process that produces oxygen rather than carbon dioxide, and it now has a line of claimed carbon-neutral aftermarket wheels. But back to the Mini's wheels. Using all recycled aluminum has the obvious benefit of not requiring new aluminum to be manufactured. But the benefits are greater than just the raw material use. Mini points out that a major improvement in carbon emissions comes from being able to skip the electrolysis process for new aluminum manufacturing. Pure aluminum is extracted from aluminum oxide (which is in turn taken from the mineral bauxite). To do this large amounts of electricity are passed through molten solutions of aluminum oxide and cryolite (which takes energy to heat) across graphite cathodes and annodes. Not only does this use a lot of electricity that has its own carbon costs, the oxygen that separates from the aluminum bonds to the graphite annodes, yielding more carbon dioxide (which is why the production of those Audi wheels is also interesting). In total, Mini says the recycled wheel production reduces carbon emissions by 75%. More specifically, it estimates about 0.16 kilograms (0.35 pounds) per kilogram (2.2 pounds) of aluminum used. Mini also stresses that this process still maintains all the strength of conventional wheels, just in a greener way. And of course, the wheels themselves are recyclable again. Mini, and BMW more broadly, are looking at ways to upscale the process and to source suitable recyclable products, likely other old wheels from cars no longer on the road. Though neither company said anything about when we'll see fully recycled wheels more widely available. Related Video: MINI Electric Pacesetter inside and out