07 Cooper S Conv,6 Speed Trans,pwr Soft Top,htd Lth,17in Mb Whls,65k,we Finance! on 2040-cars

Auto blog

Meet the Mini Urbanaut concept: an autonomous Mini minivan

If car designers are to be believed, the future of fully-autonomous electric vehicles is the box. Whether it's squared-off or rounded, it seems many autonomous concept vehicles are vans meant to efficiently carry people and stuff, or be a new living space. And that's the case with the Mini Urbanaut concept, just on a smaller scale. The Urbanaut measures in at 14.6 feet long, which is a little more than 2 feet shorter than a Toyota Sienna. But if it were put into production, it would be the biggest Mini on sale at roughly half a foot longer than the Countryman, and easily as tall if not taller (Mini didn't provide an exact height). It takes the one-box shape close to its extremes, similar to a VW Bus, which itself is seeing an electric revival. At the front, an aluminum grille inspired by the current Mini grille hides LED lights for illumination and communication, and taillights get similar aluminum coverings. The wheels are translucent and illuminated. There are cutouts that are inspired by the Union Jack flag. The Urbanaut features two particularly unusual design choices, though. The first is that it has a single sliding door for interior access. The second is that one of the C-pillars is actually a sort of display case that can store a variety of souvenirs or other trinkets. Isn't that cute? The interior has seating for four, with a rear bench and conventional bucket seat at the front for the driver next to a sort of jump seat. The driver seat can swivel to face the front for manual driving, or to face the middle for parked or autonomous modes. In between the rows of seats is a table with a decorative plant as well as the main instrument display and infotainment interface. The screen is round, a callback to old Mini instruments and the current cars' center infotainment binnacle. The idea is that the Urbanaut would primarily be used in autonomous or parked modes with occupants facing toward the middle. There is, however, a secondary display that activates at the front when the car is in manual driving mode. The interior has a number of nifty party tricks. There's a ceiling section above the rear seats called the "Loop" that has animated illumination behind a fabric covering. The dashboard lowers at the front in the stationary mode to create a daybed. The windshield can open up, too, when parked. Different vehicle modes are accessed by placing the key fob, called the "Mini Token," in the corresponding slot.

David Brown's latest Remastered project shows the Mini's classy side

England-based David Brown Automotive builds some of the most mesmerizing classic Mini models we've ever seen. Its latest creation is no exception: Commissioned by a client in Japan, it leaves behind the Mini's econobox roots and proudly highlights the car's upscale side. In a way, David Brown is to the Mini what Singer is to the Porsche 911. It keeps the original car's basic design and proportions but modifies nearly everything else. For this posh, England-inspired build, it applied a coat of paint called Fade to Black and installed 13-inch wire wheels, which were never available from the factory. There's also a hand-painted Union Jack flag on the roof. Look closely and you'll spot several other subtle changes, like LED exterior lighting, bullet-shaped door mirrors, fender flares, and smooth fenders (the originals have a seam). The resto-mod treatment continues inside with red leather upholstery, black inserts in the seats, a wood-rimmed Mona-Lita steering wheel, Smiths gauges, and a push-button ignition. David Brown also replaced the air vents and most of the switchgear, and added a modern sound system. The finishing touch is a pair of leather straps designed to carry an umbrella and attached to the passenger-side door panel. While the company has dabbled in performance, it doesn't sound like the customer who commissioned this Remastered asked for rally-ready speed. The standard engine that David Brown Automotive puts in its cars is a 1,275-cc four-cylinder that develops 71 horsepower and 88 lb-ft of torque in its standard state of tune. It's fuel-injected, and in this application it spins the front wheels via an automatic transmission. David Brown Automotive hasn't revealed how much this specific build cost. However, it previously noted that each Remastered takes about 1,000 hours of labor to complete, so it's reasonable to assume that it's priced accordingly — and likely far above anything Mini makes. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Next Mini Countryman spotted with swirls

Mini is continuing to update its models onto its latest UKL front-wheel-drive platform that it shares with parent BMW. Here, our spies caught an early glimpse of the next-gen Countryman testing on the new chassis.
Like the rest of the updated Mini lineup, the latest Countryman doesn't exactly show a huge shift in styling from the current version. The front end appears to be slightly more blunt, and the headlights have a redesigned shape. However, behind the A-pillar the differences seem to be pretty subtle. At the rear, the new Countryman also looks to adopt the brand's rounded rectangle taillights protruding into the hatch like on the standard Cooper Hardtop range. While not shown here, our spies claim that Mini is also aiming for a roomier interior for the upcoming crossover so that it can be more competitive in its class.
At least for now, the Countryman is going to be the largest vehicle in the Mini range, according to an earlier statement from chief designer Anders Warming. The CUV is rumored to debut around 2016 with some assembly possibly done at Mini's plant in the Netherlands. Until then, have a look at these spy shots and tell us what you think.