12 Cooper S Turbo Panorama Hk Sound Cold Weather Xenon Auto Climate Bluetooth Nr on 2040-cars

Auto blog

Mini John Cooper Works GP spied with wide body, big wing

The Mini John Cooper Works GP was just announced to have over 300 horsepower, and we got an early glimpse at it with teaser images. And now one of our spy photographers caught the car with very thin camouflage. The spy photos reveal that the Mini GP is sticking fairly close to the Frankfurt concept, but toning everything down a bit. At the front, the Mini GP clearly is using the current John Cooper Works hardtop front bumper, but it does have deep chin spoiler additions that allude to the GP concept's massive splitter. The grille has been revised, and the gloss black lower sections are now made of a matte black mesh design. The slot in the middle could have red accents on each side like the red stripe on the concept. The front spoiler blends right in to the new extra-wide fender flares. While the fender extensions don't protrude as far as on the concept, they're otherwise very similar in how they sweep backward at the tops and stand away from the body to allow air to flow through. Something else noticeable from the side are the enormous front brakes. The rotors nearly fill up the wheels, and the calipers look really beefy. The five-spoke wheels on this prototype will be replaced by GP-signature four-spoke wheels as revealed by teaser shots. The back of the GP looks about how we would imagine it. The split rear wing is roughly the same shape as the concept's, but a little narrower. The bumper has a big diffuser area that doesn't necessarily look functional, but should at least look cool. The rear exhaust tips look bigger than normal Mini John Cooper Works models. The Mini GP will go into production in 2020. Only 3,000 examples will be built. We suspect the GP will use the same turbocharged 2.0-liter four-cylinder engine as the BMW X2 35i, which makes 306 horsepower and 332 pound-feet of torque. Coupled with weight savings, possibly involving a rear seat deletion, and upgraded suspension, and this should be a shockingly fast Mini. Related Video:

2025 Mini Cooper E and SE fully revamped and revealed at Munich Motor Show

The 2025 Mini Cooper E and Cooper SE are here, and as you can tell by the names, Mini is starting with the electric models.  For better or worse, the new Mini Cooper design inside and out (no longer called “Hardtop") is one of the worst-kept secrets as of late. However, now we have all the official imagery of the 3-door EV, and we even got to see the car in person before the Munich Motor Show reveal. The Mini is thankfully still mini with an even shorter length than before, as the new Countryman is the one to get supersized. Its design slants toward minimalism, but it still highlights key features such as the round LED headlights, contrast roof and mirror colors and classic proportions. The lights – both in front and rear – even feature three customizable signatures, so you can choose your own adventure for your carÂ’s outward appearance. Other big changes include the deletion of chrome, flush door handles (like other new BMWs) and the lack of black cladding around the wheel arches. Mini improved the coefficient of drag with this new model to 0.28, and thanks to this, and to new battery and motor technology, the electric Mini Coopers are far more enticing than the first Mini SE. Two versions of the electric Mini Cooper will hit the market initially, with the base model being the Mini Cooper E. This model features a single electric motor making 184 horsepower and 214 pound-feet of torque, which Mini says does the 0-62 mph run in 7.3 seconds. It uses a 40.7 kWh battery pack that is good for 190 miles on the WLTP cycle, but expect that to be considerably lower for the EPA test. Meanwhile, the upgrade Mini Cooper SE ups output to 218 horsepower and 243 pound-feet, completing the 0-62 mph sprint in just 6.7 seconds. It also has a much bigger battery at 54.2 kWh, allowing for a range of 250 miles on the WLTP cycle. Charging speed is another big upgrade for these electric Minis, too, as the Cooper E can charge at speeds up to 75 kW, while the SE can do 95 kW. Mini says this gets both Coopers from a 10-80% charge in under 30 minutes. AC at-home charging maxes out at 11 kW. It also features a pre-conditioning program that will warm the battery pack in cold weather to ensure fast charging speeds when you arrive. This is part of a larger navigation system that will plan out your route to hit fast chargers as you go. As always, Mini is promising a fun-to-drive character from its entry-level hatchback.

British company announces turn-key EV conversion kit for classic Mini

Swindon Powertrain unveiled a turn-key EV conversion kit that makes electrifying a Mini built between 1959 and 2000 relatively easy. It bridges the gap between the original model and the Cooper SE released earlier in 2020. Available in December 2020, the kit consists of an electric motor mounted on a modified Mini front subframe, and purpose-designed inner CV joint housings designed to work with regular-production half shafts. Swindon notes no modifications are required; installing the kit requires removing the original front subframe, probably selling the stock engine and the transmission in the local classifieds, and bolting the new subframe to the Mini's body. Rated at 107 continuous horsepower, but programmed to offer a peak output of 160 horsepower, the motor spins the front wheels via a single-speed transmission, which seemingly settles the debate over magic wand, direct, and remote gear changes. It offers more power than any four-cylinder fitted to the Mini by the factory. After tightening the subframe bolts, owners need to source additional powertrain components, like the battery pack, the motor controller, the on-board charger, and the DC-DC converter. All of these parts are available directly from Swindon Powertrains, or from a growing list of aftermarket vendors, but they're not included in the kit. Electric technology isn't cheap, and Swindon's kit is no exception. It's priced at GBP8,850 (about $11,500) before taxes and shipping enter the equation, meaning it's more expensive than rebuilding an original four-cylinder engine. Viewed in this light, electrification is better suited to some of the high-zoot custom builds (like the stunning Remastered available from David Brown Automotive) priced in the six digits than to a beater 1980s City model.