Cooper Clubman 2010 S Model on 2040-cars

Auto blog

BMW i3s traction control tech going in all BMW, Mini cars

The BMW i3s is essentially a warmed-up version of the i3 electric car we all know and love. The performance boost isn't huge — just 14 horsepower and 15 pound-feet of torque — but it also gets a new suspension, wheels and tires as well as an improved traction control system. We found the car to benefit from all the updates when we drove it for our First Drive Review, but now BMW has offered up more details on just how the traction control system of the i3s helps make it better to drive. The company says it'll expand the technology to all future BMW and Mini models as well. The i3s's system is calibrated to help it to pull away quickly from a stop, making full use of the instantaneous torque offered by the electric motor. It also improves stability when accelerating out of corners, when using regenerative braking and, of course, when the road conditions are less than ideal. The results are palpable, and with the other improvements the i3s definitely feels stronger off the line, as we found on our drive. It's also about a half-second quicker to 60 miles per hour, at 6.8 seconds. The secret is in the response time of the stability control, which BMW claims is 50 times faster than the conventional system. This is made possible by moving the control process into the powertrain itself, rather than a remote unit. This reduces the signal path and, thus, the response time of the traction control system. BMW's Head of Chassis Development, Peter Langen, said of it, "With their high levels of torque and instantaneous responses to every movement of the accelerator, electric motors already make significantly higher demands on driving stability systems than conventional power units." While engineered to make the most of the electric motor, BMW says the shorter cycles of this traction control system show promise for internal combustion vehicles as well. As such, we'll begin to see the improved technology applied across the BMW and Mini lineups going forward. Related Video:

2021 Mini Countryman shows off its fresh face

The 2021 Mini Countryman has been spied once again, and it has shed some of its camouflage. We get a really good look at what appears to be the base Countryman's new front and rear fascias, updated taillights and interior. Otherwise, the little crossover is mostly unchanged. Up front, the bumper changes from three large grille openings to one standard one, and it gets the same slats as the grille between the headlights. On either side are big, round fog lights, which are themselves flanked by openings that probably create wind curtains around the wheels. Looking at the headlights, they have new internals with more squared-off projector surrounds. We also get some good looks at the John Cooper Works model. The shots of it at the Nurburgring give us a good look at the front, which looks generally unchanged with the same front bumper as the current car, but possibly with a new grille and headlight design. At the back, the car reveals new Union Jack taillights similar to those introduced on the Mini Hardtop and Clubman. Another photo shows what seems to be a John Cooper Works Countryman with part of a cloth cover lifted. This shows the rear bumper is mostly the same, but it gets a new mesh grille pattern over the rear diffuser area. Finally, we get a look at the interior. Most of it is the same, but the instrument cluster loses the analog dial of the current model. In its place is the oval-shaped cluster from the Mini Cooper SE electric car, which likely combines analog dials on either side with a screen nestled between. These changes are all relatively minor, and seem to be production ready. As such, we would expect the changes to be introduced for the 2021 model year. The reveal could be later this year. Of course, it's also possible the changes could be pushed back in the wake of the coronavirus crisis. Related Video:

Mini John Cooper Works 1 To 6 Edition extols the manual transmission

Throughout the final year of this generation of Mini Cooper, the Anglo-German brand has been rolling out limited editions about every 90 days. We got the Mini 20 Years Edition last September, the Mini Convertible Seaside Edition in March, the Mini Clubman Final Edition in April, now we have the fourth to complete the set: The Mini John Cooper Works 1 to 6 Edition. It memorializes Mini racing and the "pure essence of motorsport" as a JCW with a six-speed manual transmission, hence the 1 To 6 name. It copies the formula for the Clubman Final Edition in being almost only special badges, colors, and materials; there's little more to this than a retail Mini JCW with a stick shift and three more horsepower. Outside, there's a Midnight Black body ornamented with Piano Black for the grille surround, side scuttles, and waistline finisher. The 18-inch Circuit Spoke rims come in Jet Black. The gray bonnet stripe is composed of shift pattern line drawings, the same shift pattern showing up on the hatch in black. Red, white, and silver 1 to 6 badges appear on the side scuttles and C-pillars. Mini's making 999 examples for global buyers, so "One of 999" appears in places like the sunroof, steering wheel, and instrument panel. The black and gray interior shows off an antracite-colored headliner, illuminated red bezel for the instrument cluster, red ambient lighting, badged floor mats, and course, the stick shift with special stitching. The special makes its world debut at next month's Nurburgring 24-Hour race. One car will compete as part of the Bulldog Racing team wearing race number #126, driven by Charlie Cooper, a regular competitor who also happens to be the grandson of the John Cooper that Mini's fastest trims honor. It's a pairing that shows how the "essence of motorsport" has progressed; the hardcore Mini JCW that Bulldog Racing runs is fitted with an eight-speed automatic. We'll find out soon how many of the Mini JCW 1 to 6 Editions will come to the U.S. and the premium Mini will charge over the $35,400 of the regular Mini JCW.