2011 Mini Cooper Clubman Chili Red Just Reduced! Only $17,980!! on 2040-cars

Auto blog

British company announces turn-key EV conversion kit for classic Mini

Swindon Powertrain unveiled a turn-key EV conversion kit that makes electrifying a Mini built between 1959 and 2000 relatively easy. It bridges the gap between the original model and the Cooper SE released earlier in 2020. Available in December 2020, the kit consists of an electric motor mounted on a modified Mini front subframe, and purpose-designed inner CV joint housings designed to work with regular-production half shafts. Swindon notes no modifications are required; installing the kit requires removing the original front subframe, probably selling the stock engine and the transmission in the local classifieds, and bolting the new subframe to the Mini's body. Rated at 107 continuous horsepower, but programmed to offer a peak output of 160 horsepower, the motor spins the front wheels via a single-speed transmission, which seemingly settles the debate over magic wand, direct, and remote gear changes. It offers more power than any four-cylinder fitted to the Mini by the factory. After tightening the subframe bolts, owners need to source additional powertrain components, like the battery pack, the motor controller, the on-board charger, and the DC-DC converter. All of these parts are available directly from Swindon Powertrains, or from a growing list of aftermarket vendors, but they're not included in the kit. Electric technology isn't cheap, and Swindon's kit is no exception. It's priced at GBP8,850 (about $11,500) before taxes and shipping enter the equation, meaning it's more expensive than rebuilding an original four-cylinder engine. Viewed in this light, electrification is better suited to some of the high-zoot custom builds (like the stunning Remastered available from David Brown Automotive) priced in the six digits than to a beater 1980s City model.

Mini John Cooper Works GP spied with wide body, big wing

The Mini John Cooper Works GP was just announced to have over 300 horsepower, and we got an early glimpse at it with teaser images. And now one of our spy photographers caught the car with very thin camouflage. The spy photos reveal that the Mini GP is sticking fairly close to the Frankfurt concept, but toning everything down a bit. At the front, the Mini GP clearly is using the current John Cooper Works hardtop front bumper, but it does have deep chin spoiler additions that allude to the GP concept's massive splitter. The grille has been revised, and the gloss black lower sections are now made of a matte black mesh design. The slot in the middle could have red accents on each side like the red stripe on the concept. The front spoiler blends right in to the new extra-wide fender flares. While the fender extensions don't protrude as far as on the concept, they're otherwise very similar in how they sweep backward at the tops and stand away from the body to allow air to flow through. Something else noticeable from the side are the enormous front brakes. The rotors nearly fill up the wheels, and the calipers look really beefy. The five-spoke wheels on this prototype will be replaced by GP-signature four-spoke wheels as revealed by teaser shots. The back of the GP looks about how we would imagine it. The split rear wing is roughly the same shape as the concept's, but a little narrower. The bumper has a big diffuser area that doesn't necessarily look functional, but should at least look cool. The rear exhaust tips look bigger than normal Mini John Cooper Works models. The Mini GP will go into production in 2020. Only 3,000 examples will be built. We suspect the GP will use the same turbocharged 2.0-liter four-cylinder engine as the BMW X2 35i, which makes 306 horsepower and 332 pound-feet of torque. Coupled with weight savings, possibly involving a rear seat deletion, and upgraded suspension, and this should be a shockingly fast Mini. Related Video:

Mini Clubman Concept isn't mini, isn't a Clubman

Hey, remember when Mini was... mini? I know, you've heard all this before. But seriously.
Take this new Mini Clubman Concept, for example. As you'll recall, the current Clubman slots in between the Hardtop and Countryman models in the Mini lineup. But because the new, third-generation Mini has grown, so has everything else. And in fact, the concept car seen here is actually 4.4 inches longer and just over 2 inches wider than the current, already-large Countryman. The future of Mini looks awfully maxi.
Furthermore, the Clubman as we know it uses a weird, five-door layout (two up front, a third, suicide door, and two barn doors out back), but this concept adds a sixth door for a decidedly more conventional layout. Of course, four real doors for passengers sort of takes the uniqueness out of the Clubman package, and essentially makes this thing a not-as-tall, front-wheel-drive Countryman. Totally necessary, right?