White ( Running Well Kept) Fully Operational Constable Car With Lights And Siren on 2040-cars

Auto blog

Junkyard Gem: 1992 Mercury Grand Marquis LS

We've all been seeing the instantly familiar Ford Crown Victoria P71 Police Interceptor on North American roads for what seems like forever, though in fact the very first of the aerodynamic Crown Vics didn't appear until a mere 31 years ago. Yes, after more than a decade of boxy LTD Crown Victorias, Dearborn took the late-1970s-vintage Panther platform and added a brand-new, Taurus-influenced smooth body and modern overhead-cam V8 engine, giving us the 1992 Ford Crown Victoria. The rule was, since 1939, that (nearly) every Ford model needed a corresponding Mercury, and so the Mercury Division applied different grille and taillights and the rejuvenated Grand Marquis was born. Here's one of the first of those cars to be built, now residing in a Denver-area self-service boneyard. The Marquis name goes respectably far back, to the late 1960s and a Mercurized version of the Ford LTD hardtop. The Grand Marquis began life as the name for an interior trim package on the 1974 Marquis Brougham (also LTD-based), eventually becoming a model in its own right for the 1979 model year. Today's Junkyard Gem came off the Ontario assembly line in March 1991, making one of the very first examples built. For 1992 (and through 2011), the Grand Marquis was a Crown Victoria with slightly enhanced bragging rights. This one has the top-grade LS trim, with an MSRP of $20,644 (that's about $44,370 in inflation-adjusted 2022 dollars). The corresponding Ford-badged model (built on the same assembly line by the same workers) would have been the Crown Victoria LX, which actually cost a bit more: $20,987 ($44,910 now). The very cheapest civilian 1992 Crown Vic cost just $19,563 ($42,045 today). There weren't any powertrain differences between the Crown Victoria and Grand Marquis in 1992. The only engine available was this Modular 4.6 SOHC V8, rated at either 190 (single exhaust) or 210 (dual exhaust) horsepower. The transmission was a four-speed automatic with overdrive. How many miles are on this one? Can't say! Based on the worn-out interior, I'm going to guess 221,719 miles passed beneath this car's wheels during its 32-plus years on the road. I've seen some very high-mile Police Interceptors, of course, including one with 412,013 miles, but Ford didn't go to six-digit odometers in the Grand Marquis until a bit deeper into the 1990s. Thanks to flawed speech-to-text applications on smartphones, the Grand Marquis is known as the "Grandma Keith" to many of us today.

Ford recalls 600,000 older-model sedans for braking issue

Ford is recalling 600,166 older-model Ford, Lincoln and Mercury vehicles over an issue that could affect braking and increase the risk of a crash. The safety recall covers certain Ford Fusion, Mercury Milan and Lincoln MKZ sedans from the 2006 through 2010 model years that were built at Ford’s Hermosillo Assembly Plant in Mexico between Feb. 22, 2006, and July 15, 2009. Ford says a valve that is normally closed inside the hydraulic control unit may get stuck in the open position or be slow to close, which could make it harder to engage the brakes and increase risk of a crash. Ford says itÂ’s aware of 15 reports of accidents and two injuries possibly related to the issue. Dealers will inspect the hydraulic control unit for signs of the problem and replace it, if necessary. The dealers will pressure-flush the system with brake fluid and replace the reservoir cap with a new one. Ford is also issuing a small recall of 33 of its 2020 F-150 trucks in the U.S. and 51 in Canada over potentially damaged spare tires. It says the bead area on the tires may have been damaged when it was mounted onto the wheel assembly, leaving it vulnerable to corrosion, separation of the bead wire and ultimately a rapid loss of air pressure and detachment from the wheel. Dealers will replace the spare tire. Affected vehicles were built at the Dearborn Truck Plant from Nov. 10-21 of this year.

Ford finds flex-fuel engine design plays big role in emissions output

How bad is ethanol for your engine? There's been a lot of debate on this issue as the US considers upping the biofuel content in the national gasoline supply from 10 percent (E10) to 15 percent (E15). The ethanol industry and some scientists say higher ethanol blends show no "meaningful differences" in new engines while the oil industry says ethanol creates health risks. Researchers working at the Ford Research and Innovation Center decided to take a closer look at how a wide range of gas-ethanol blends - E0, E10, E20, E30, E40, E55 and E80 - affected the emissions coming out of a flex-fuel 2006 Mercury Grand Marquis. To see the full report, printed in the journal Environmental Science & Technology, requires payment, but there is an abstract and Green Car Congress has some more details. The gist is that, "with increasing ethanol content in the fuel, the tailpipe emissions of ethanol, acetaldehyde, formaldehyde, methane, and ammonia increased." At least NOx and NMHC emissions decreased. The researchers say that the effects are due to the fuel and "are expected for all FFVs," but that the way that a manufacturer calibrates the engine will affect NOx, THC, and NMOG emissions. It's this last bit that's important, since the researchers found, "Higher ethanol content in gasoline affects several fundamental fuel properties that can impact emissions. ... These changes can have positive or negative effects that can depend on engine design, hardware, and control strategy. In addition to direct emissions impacts, higher ethanol content fuel can also provide more efficient combustion and overall engine operation under part-load conditions and under knock-limited higher-load conditions." So, as we head towards more ethanol in our fuel supply (maybe), manufacturers are going to need to learn how to burn it most efficiently.