1969 Mercury Cougar Xr-7 Jet Black Conv't Leather Totally Restored on 2040-cars

Auto blog

Junkyard Gem: 1973 Mercury Montego MX Brougham Sawzall Convertible Edition

You know how it goes— the weather is warm, you want to do some top-down driving, and you lack a proper convertible... but you do have a hooptie Detroit car on one side of the garage and a big ol' Sawzall on the other. Put the two together and you have a Sawzall Convertible, which generally lasts for about one summer before it gets scrapped. Here's a fine example of such a car, photographed in a San Francisco Bay Area self-service junkyard. Most Sawzall Convertibles (yes, it should be called a roadster, but nobody does that) have raw, ragged metal edges, or maybe duct tape over the stumps of the amputated pillars, but someone went to the trouble to weld nice smooth metal covers over the hackage on this one. The windshield is gone. Instead, the windshield frame is ringed by tongue depressors held in place by gooey roofing tar. No, we don't know why. The Montego MX Brougham was a hot-selling personal luxury coupe in its day, selling for $3,041 in 1973. That's just under $17,000 in 2017 dollars. It must have been fun, cruising this thing on Bay Area streets with no roof and a rattle-can spray-bomb job. This one has the optional 400-cubic-inch V8 engine, rated at 171 horsepower. What would this car's original buyer have thought of its fate? This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. It's like a Marquis Brougham after you squish it in the car crusher! Featured Gallery Junked 1973 Mercury Montego MX Brougham Sawzall Convertible View 22 Photos Auto News Mercury Convertible Luxury Classics montego

Ford finds flex-fuel engine design plays big role in emissions output

How bad is ethanol for your engine? There's been a lot of debate on this issue as the US considers upping the biofuel content in the national gasoline supply from 10 percent (E10) to 15 percent (E15). The ethanol industry and some scientists say higher ethanol blends show no "meaningful differences" in new engines while the oil industry says ethanol creates health risks. Researchers working at the Ford Research and Innovation Center decided to take a closer look at how a wide range of gas-ethanol blends - E0, E10, E20, E30, E40, E55 and E80 - affected the emissions coming out of a flex-fuel 2006 Mercury Grand Marquis. To see the full report, printed in the journal Environmental Science & Technology, requires payment, but there is an abstract and Green Car Congress has some more details. The gist is that, "with increasing ethanol content in the fuel, the tailpipe emissions of ethanol, acetaldehyde, formaldehyde, methane, and ammonia increased." At least NOx and NMHC emissions decreased. The researchers say that the effects are due to the fuel and "are expected for all FFVs," but that the way that a manufacturer calibrates the engine will affect NOx, THC, and NMOG emissions. It's this last bit that's important, since the researchers found, "Higher ethanol content in gasoline affects several fundamental fuel properties that can impact emissions. ... These changes can have positive or negative effects that can depend on engine design, hardware, and control strategy. In addition to direct emissions impacts, higher ethanol content fuel can also provide more efficient combustion and overall engine operation under part-load conditions and under knock-limited higher-load conditions." So, as we head towards more ethanol in our fuel supply (maybe), manufacturers are going to need to learn how to burn it most efficiently.

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.