1992 Mercury Capri Xr2 Convertible Miata Copy on 2040-cars

Auto blog

Ford finds flex-fuel engine design plays big role in emissions output

How bad is ethanol for your engine? There's been a lot of debate on this issue as the US considers upping the biofuel content in the national gasoline supply from 10 percent (E10) to 15 percent (E15). The ethanol industry and some scientists say higher ethanol blends show no "meaningful differences" in new engines while the oil industry says ethanol creates health risks. Researchers working at the Ford Research and Innovation Center decided to take a closer look at how a wide range of gas-ethanol blends - E0, E10, E20, E30, E40, E55 and E80 - affected the emissions coming out of a flex-fuel 2006 Mercury Grand Marquis. To see the full report, printed in the journal Environmental Science & Technology, requires payment, but there is an abstract and Green Car Congress has some more details. The gist is that, "with increasing ethanol content in the fuel, the tailpipe emissions of ethanol, acetaldehyde, formaldehyde, methane, and ammonia increased." At least NOx and NMHC emissions decreased. The researchers say that the effects are due to the fuel and "are expected for all FFVs," but that the way that a manufacturer calibrates the engine will affect NOx, THC, and NMOG emissions. It's this last bit that's important, since the researchers found, "Higher ethanol content in gasoline affects several fundamental fuel properties that can impact emissions. ... These changes can have positive or negative effects that can depend on engine design, hardware, and control strategy. In addition to direct emissions impacts, higher ethanol content fuel can also provide more efficient combustion and overall engine operation under part-load conditions and under knock-limited higher-load conditions." So, as we head towards more ethanol in our fuel supply (maybe), manufacturers are going to need to learn how to burn it most efficiently.

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

Junkyard Gem: 1979 Mercury Marquis 2-Door Sedan

As the creator of the now-much-overused term "Malaise Era" (which I say started in 1973 and ended in 1983, full stop), I have a certain affection for the big two-door Detroit cars of the late 1970s. When such a car is built on the very first model year of Ford's long-lived Panther platform and I find one in a junkyard, I must document it. The 1979 Mercury Marquis is such a car, and this one was found in a San Francisco Bay Area self-service yard last month. Since Ford built the Grand Marquis all the way through the demise of the Panther platform— and Mercury itself— in 2011, it's easy for us to forget that the model name started out as just the plain old Marquis, back in the 1967 model year, with the Grand appellation used for the car's top trim level. While today's Junkyard Gem has some of the features of the Grand Marquis and Marquis Brougham trim levels for 1979 (notably the padded vinyl landau roof and power windows), it lacks the huge chrome lower-body moldings of those cars. Instead, it's a regular Marquis 2-door sedan with a big load of expensive options. That landau roof has suffered greatly from its decades beneath the vinyl-disintegrating California sun. The Panther platform was a big technological upgrade from the late-1950s-vintage chassis technology of full-sized Fords of the 1960s and 1970s, and it stayed in front-line service in much the same form through 2011. Though its ride and handling were much improved, the 1979 Marquis was quite a bit smaller than its predecessors, and that caused some grumbling among Mercury shoppers. Some ham-handed junkyard shoppers really tore up the interior of this car while extracting a few bits and pieces, but we can still admire the Pine Green pleather of the glorious Twin Comfort Lounge front seats. You had two engine choices when buying a new '79 Marquis: the base 302-cubic-inch (5.0-liter) Windsor V8 making 129 horsepower or the optional 351-cubic-inch (5.8-liter) Windsor V8 rated at 138 horsepower. This one appears to be the 351, the same engine as had been swapped into the pizza-delivery Mercury I drove in the middle 1980s. New cars sold in California around this time had these giant emissions-numbers stickers on the side glass. Later, they went on the underside of the hood.