2000 Mercury Sable Ls Keyless Entry Sunroof Leather Seats Runs Great No Reserve on 2040-cars

Auto blog

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

Icon and Stealth EV are building an electric Derelict Mercury

Icon, a company known for its high-quality restomod vehicles, is building another Derelict, this one a 1949 Mercury coupe. While the fact Icon is building another one of its sleeper hot rods with patina isn't the most shocking, what's under the hood is. The company has teamed up with Stealth EV to turn this latest Derelict into an electric car. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The car was shown in the above Twitter post with video. The exterior is just what you'd expect from an Icon Derelict. It's solid but with a weathered finish. And even as the guy from Stealth EV approaches the car, it looks like it has a V8 under the hood. But as he explains, there's actually the two motor controllers and half of a Tesla battery pack under there. It's just that they've all been given some classy looking metal casings and mounted to look like a V8. Apparently the motors themselves are in the transmission tunnel. The Stealth EV rep says it uses a pair of AM Racing motors. Depending on which motor controllers the companies are using, those motors could produce as much as 700 horsepower. Power will go to the rear wheels and no transmission will be used, making it direct drive. It will have a limited-slip differential, and the whole car sits on an Art Morrison chassis with independent suspension. This actually isn't the first electric Icon, nor the first developed with Stealth EV. Before this, the companies created a totally awesome electric Volkswagen Thing. That little truck made much less power at 180 horses, but it was also a way smaller and lighter vehicle. Related Video:

NHTSA investigating Ford's solution to May 2014 power steering recall

The National Highway Traffic Safety Administration is investigating a complaint that Ford's response to a May 2014 recall of the 2008 to 2011 Ford Escape and Mercury Mariner doesn't quite go far enough to solve a troubling power-steering problem. Roughly a year ago, Ford recalled nearly a million vehicles after it was found that a problem with the torque sensor's communication with the power steering control module could cut steering assistance for drivers. While manual steering would still be available, the problem was enough to ask drivers to report in to have the PSCM inspected, and if necessary, replaced (along with the torque sensor, or in dramatic cases, the entire steering column). That would only happen, though, if trouble codes were being thrown. If there weren't any problems, dealers were told to simply update the PSCM's software so that any issues between it and the torque sensor would simply throw a visual and audio warning – power steering would still be maintained. The petitioner claimed that following the recall work, he still experienced a problem with the torque sensor. According to NHTSA, a claim was made that Ford didn't go far enough in its solution to the problem, and that "the software update itself may in fact cause further issues with the affected vehicle's power steering, causing it to fail, and ultimately requiring replacement of the torque sensor or entire steering column." The petition was filed in early February and is now officially being looked into by NHTSA.