2002 Mercury Mountaineer Base Sport Utility 4-door 4.0l on 2040-cars

Auto blog

NHTSA investigating 725k Ford, Mercury vehicles for stalling issue

Owners of Ford Escape, Mercury Mariner, Ford Fusion and Mercury Milan models, listen up. According to a report on Automotive News, the National Highway Traffic Safety Administration has opened an investigation into these four vehicles totaling an estimated 725,000 units. The investigation appears to center around a malfunctioning throttle body on non-hybrid models of the 2005-2012 Escape and 2011-2012 Fusion. With Mercury dying off after the 2011 model year, this probe will also apply to the 2005 through 2011 Mariner and the 2011 Milan. There has been some discussion around the Escape stalling issue for some time now, but this investigation appears to be larger in scope than before.
Though not a recall yet, NHTSA's Office of Defects Investigation (ODI) has received 123 complaints of stalling or surging vehicles, while Ford itself has logged 1,472 complaints. The investigation report, which is posted below, seems to indicate that a faulty circuit board for the throttle body could cause the vehicle to go into limp mode, which, according to NHTSA, could cause complaints of both stalling and surging.

Junkyard Gem: 1970 Mercury Cougar

The plot of the Mercury Cougar story took a lot of strange twists and turns during its 35 or so years, from ponycar to immense luxobarge to family sedan to station wagon to Integra competitor. Examples of the first Cougar generation are nearly extinct in American wrecking yards, so I was excited to spot this one in Denver. Lest you shed any tears over this car going to the crusher, know that it was suffering from the ravenous teeth of the Rust Monster long before it got here. The 1967-1970 Cougar was based on the Mustang platform of the same era, and so it was a sleeker and quicker cat than its successors. Still, the longer wheelbase, extra equipment and all the cool-looking bodywork added some heft; the 1970 Mustang hardtop with V8 scaled in at 2,923 pounds, while the 1970 Cougar weighed 3,307 pounds. The current Ford Focus would fit just between those two weights. There was also a mid-cycle refresh in that era, with the '67-'68 and '69-'70 having different exterior styling and interiors. The '69 and '70 had different front end styling as well, with the latter re-adopting the vertical grille slats featured on the earlier model years. The '69 has horizontal slats. The drivetrain and just about everything else of value has been shorn from this car, perhaps before it arrived in this yard. In 1970, a bewildering assortment of V8 engines was available in the Cougar, including a Boss 302, two completely different 351s, and a 335-horse Cobra Jet 428. The base engine was a 351 Windsor making 250 gross horsepower. Since car rooftops mostly don't rust, why would someone cut out this one? Sheet metal needed for patching a leaky shed roof, perhaps? This 2005-2006 Denver Nuggets window sticker indicates that the car was on the street (probably) as recently as 11 years ago. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. It's savage. It's cool. It's primitive. It's sleek. It's wild. It's elegant. Password for action in the 70s! Featured Gallery Junked 1970 Mercury Cougar View 18 Photos Auto News Mercury

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.