2001 Mercury Mountaineer Ford Explorer on 2040-cars

Auto blog

NHTSA and Ford investigating steering issues in Crown Vic, Grand Marquis and Marauder

There may be more steering woes for the Ford Crown Victoria. The National Highway Traffic Safety Administration has opened a preliminary evaluation into the Crown Vic and Mercury Grand Marquis from the 2004 to 2007 model years and the Mercury Marauder for the 2004 and 2005 model years because the steering shaft can jam. The issue could potentially affect an estimated 500,000 vehicles.
According to the regulator, there is a possibility that the driver's side heat shield for the exhaust manifold can rust, dislodge, and then wedge into the steering shaft. If this occurs, it leads to a situation where the driver can no longer control the car.
NHTSA has received five complaints of this happening, including one alleged case with an injury. In that situation, the car was driving onto the highway, lost control and rolled over. One occupant was hurt in the accident.

Junkyard Gem: 1981 Mercury Cougar XR-7

The story of the Mercury Cougar involves more plot twists and unexpected digressions than that of just about any other Detroit car, with successive Cougar generations based on the Ford Mustang (1967-1973), the Ford Torino and/or Thunderbird (1974-1979), various Fox Fords including the Thunderbird (1980-1988), the MN12 Thunderbird/Lincoln Mark VIII (1989-1997), and the Ford Mondeo (1999-2002). There were wagon and sedan Cougars for brief periods, just to confuse everybody, and the rakish XR-7 Cougars sometimes lived on different platforms from their ordinary non-XR-7 counterparts. I think the Late Malaise Era Fox XR-7s are among the most interesting of the bunch, so I was quite excited to spot this tan-over-gold '81 in a Denver yard. I tried to count the number of screaming-cat badges on and in this car and gave up once I hit a dozen. The steering wheel, door panels, C pillars, center console, and — of course — the hood ornament all boast snarling felines. Earlier Cougars had emblems showing full side views of stalking catamounts, but the Cougar logo for the 1980s showed just the head. This car got the optional center console, which I hear is quite a rarity. You had to pay $174 extra (that's around $513 in 2020 dollars) for an AM/FM/cassette audio system in the '81 Cougar, but at least the air conditioning was standard equipment. Believe it or not, thieves used to steal these radios. Kumpf Lincoln-Mercury still exists in Englewood (as Landmark Lincoln), and the yard that now houses this car can be found just 15 miles up Broadway on the north side of Denver.  The padded landau roof hasn't fared so well beneath the fierce Colorado sun, but overall this car seems very solid. Sadly, only the Mustangs and (once in a long while) Fairmonts get much love from the Fox Ford crowd these days. Three Mercury "wire wheel" hubcaps and one from a Lincoln. The base engine in the 1981 XR-7 was the "Thriftmaster" 200-cubic-inch (3.3-liter) straight-six, but very few XR-7 buyers would have refrained from checking the box for one of the two optional Windsor V8s. I can't tell if we're looking at the 255-cubic-inch (4.2-liter) version or the 302-cubic-inch (5.0-liter) one here, but real-world drivers might not have noticed the difference between the 120-horse 255 and the 130-horse 302, anyway. The non-XR-7 Fox Cougars had five-speed manual transmissions as base equipment (which nobody wanted), but all 1981 XR-7s had automatics.

Ringbrothers shows off Coyote-powered 1968 Mercury Cougar

We'll openly admit that not every SEMA build is our cup of tea. But this? A tastefully resto-modded 1968 Mercury Cougar with a 460-horsepower Ford Mustang V8? Yeah, this is right in our wheelhouse. Sadly, there was no in-pwerson SEMA show in 2020, so we missed out on gems like this one. SEMA or no SEMA, the aftermarket carries on, and co-owners Jim and Mike Ring of Ringbrothers (get it?) saw no reason to let their time and effort go to waste.  When they're not building wild customs (see: 1,100-horsepower 1972 AMC Javelin AMX) or more subtle showcases (such as this Cougar or their 1971 K5 Chevy Blazer build from 2018), the folks at Ringbrothers crank out factory reproduction parts, whether for old-fashioned restoration or modification purposes. While '60s muscle cars are recurring build subjects for the two, the Cougar was the first of its kind they tackled.  Keeping it in the family, Ringbrothers sourced a Ford 5.0-liter "Coyote" V8 and a 10-Speed Automatic (lifted from an F-150 Raptor, incidentally) for the build. They didn't stop with the driveline, of course. The suspension was overhauled with a little help from DSE and a set of HRE Series C1 C103 Forged 3-Piece wheels were thrown over upgraded brakes.  "We put our heart into each car we build, and this Cougar is no exception," Jim said. "The finished product is mild and classy, yet any enthusiast instantly knows it's not stock. I imagine this is what Mercury designers would have come up with if they were building the Cougar today." "While we couldn't bring the car to the SEMA Show, we hope it can be shown to the public soon," Mike said. "We had never done a Cougar before, so this was a fun build. I love working with new shapes and coming up with new ideas." There's plenty to appreciate about this Cougar apart from the mechanicals, too. The finish is Augusta Green Metallic (courtesy of BASF), which was a factory color in 1968. You may know it by another name: Highland Green. There are a few custom exterior touches, but they're quite subtle and styled to be period-correct. The interior was also restored and updated, and it's where you'll find the only thing we're not fond of: that big, fat truck shifter. Gearbox choices notwithstanding, it's a bit of an eyesore. But considering how gorgeous the rest is, we'll give it a pass.  Related Video: