2007 V6 Premier 3.0l Auto Black on 2040-cars

Auto blog

Watch as an out-of-control car demolishes gas pump

A Baltimore area man was fighting for his life Tuesday after crashing his car into a gas station. According to WBAL, the unidentified 64-year-old lost control of his vehicle for unknown reasons around 4:55 a.m. May 1 in Parkville, Md. The 2007 Mercury Milan careened downhill, ramped over a curb, and smashed full-speed into a gas station pump. The car then flipped and came to rest against one of the station's canopy support pillars. Don Karbowniczek, owner of a service station across the street, told WBAL he was shocked there wasn't more damage. It's also surprising that the car even made it to the pumps, as it had to thread past a coin-op vacuum machine, the station's sign, a utility pole, and a traffic light pole. "It came right through, took some of our bushes out, just trimmed them for us, and how it got through and flip the way it did, I don't know. From what I see on the marks, it had to go airborne and just come down on the pump," Karbowniczek said. Thankfully there was no fire or explosion. Gas pumps have shear valves - safety devices that immediately cut the flow of gasoline when a pump is damaged. The driver was rushed to a hospital with life-threatening injuries, and was in critical condition. Police theorized the driver may have become stricken with a health issue when he lost control. Related Video: News Source: WBAL Auto News Mercury maryland gas station

Icon and Stealth EV are building an electric Derelict Mercury

Icon, a company known for its high-quality restomod vehicles, is building another Derelict, this one a 1949 Mercury coupe. While the fact Icon is building another one of its sleeper hot rods with patina isn't the most shocking, what's under the hood is. The company has teamed up with Stealth EV to turn this latest Derelict into an electric car. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The car was shown in the above Twitter post with video. The exterior is just what you'd expect from an Icon Derelict. It's solid but with a weathered finish. And even as the guy from Stealth EV approaches the car, it looks like it has a V8 under the hood. But as he explains, there's actually the two motor controllers and half of a Tesla battery pack under there. It's just that they've all been given some classy looking metal casings and mounted to look like a V8. Apparently the motors themselves are in the transmission tunnel. The Stealth EV rep says it uses a pair of AM Racing motors. Depending on which motor controllers the companies are using, those motors could produce as much as 700 horsepower. Power will go to the rear wheels and no transmission will be used, making it direct drive. It will have a limited-slip differential, and the whole car sits on an Art Morrison chassis with independent suspension. This actually isn't the first electric Icon, nor the first developed with Stealth EV. Before this, the companies created a totally awesome electric Volkswagen Thing. That little truck made much less power at 180 horses, but it was also a way smaller and lighter vehicle. Related Video:

NHTSA investigating Ford's solution to May 2014 power steering recall

The National Highway Traffic Safety Administration is investigating a complaint that Ford's response to a May 2014 recall of the 2008 to 2011 Ford Escape and Mercury Mariner doesn't quite go far enough to solve a troubling power-steering problem. Roughly a year ago, Ford recalled nearly a million vehicles after it was found that a problem with the torque sensor's communication with the power steering control module could cut steering assistance for drivers. While manual steering would still be available, the problem was enough to ask drivers to report in to have the PSCM inspected, and if necessary, replaced (along with the torque sensor, or in dramatic cases, the entire steering column). That would only happen, though, if trouble codes were being thrown. If there weren't any problems, dealers were told to simply update the PSCM's software so that any issues between it and the torque sensor would simply throw a visual and audio warning – power steering would still be maintained. The petitioner claimed that following the recall work, he still experienced a problem with the torque sensor. According to NHTSA, a claim was made that Ford didn't go far enough in its solution to the problem, and that "the software update itself may in fact cause further issues with the affected vehicle's power steering, causing it to fail, and ultimately requiring replacement of the torque sensor or entire steering column." The petition was filed in early February and is now officially being looked into by NHTSA.