2005 Mercury Grand Marquis on 2040-cars

Auto blog

Translogic drives wood-burning Mercury Beaver XR-7

You read the title right, we're talking about the Mercury Beaver XR-7. No, Mercury never officially built a car called the beaver. This is the brainchild of upstate New Yorker Chip Beam, who owns and operates Beaver Energy, LLC. It runs on gases created by wood pellets fermented in a 2,400-degree furnace and fed to a supercharged Ford 4.6-liter V8.
By all accounts, it gets down the road just fine, and has pretty close to full power. The best part is, you can grow the fuel yourself and avoid patronizing big oil, if that's your thing. The only drawback that we can see to the Mercury Beaver XR-7 is the PVC pipe jungle occupying the space that would be the trunk under normal circumstances.
Still, if you're willing to smell like a mountain man and look like a bad Back to the Future knockoff, this ride is right up your alley. Click past the jump to see Translogic's take on this modified Merc.

Junkyard Gem: 1991 Mercury Capri XR2

Just a year after the Mazda MX-5 Miata first went on sale in the United States, Ford's Mercury Division began selling a similarly-priced two-seat convertible here. This was the 1991-1994 Mercury Capri, and I've found an example of the hot-rod turbocharged version in a northeastern Colorado car graveyard. The Capri name has an illustrious history within the Ford Empire. First used on a Lincoln in 1952, it went on to serve as the name for a hardtop version of the early-1960s Ford Consul in the UK, then as the designation for a low-end trim level on the 1966-1967 Mercury Comet. Starting in the 1969 model year in Europe (1970 in North America), Ford began selling the best-known Capri of all: a sporty coupe based on the Cortina, sold through Mercury dealers in the United States but never badged as a Mercury here. Sales of that Capri halted here after 1978 (they continued through 1986 in Europe), but the Mercury Division then moved the name over to its version of the 1979-1986 Ford Mustang. After that, Ford Australia took the Capri name for a new Mazda 323-based sports car beginning in 1989. Then Dearborn decided that an Americanized version of the Australian Capri would be a success on this side of the Pacific, and left-hand-drive Capris began showing up in American Mercury showrooms in late 1990. Today's Junkyard Gem is one of those first-model-year cars, and it's the very rare turbocharged XR2 version. While this car was intended to be a competitor for the Miata, it's really that car's Mazda cousin. Both cars got their power from 1.6-liter versions of Mazda's versatile B engine, though the Capri had the same front-wheel-drive setup as its 323/Protege (and Escort/Tracer) platform siblings. At the same time, Ford was selling Kia-built Mazdas with Festiva (and, a bit later, Aspire) badging, alongside Mazda MX-6s with Probe badges. Just to make things interesting, American Mazda dealers were selling Ford Explorers as Mazda Navajos, while Rangers with Mazda badges followed starting in 1994. The 1990s were Mazda-riffic times at Ford! This car wasn't the first Australian-designed, Mazda-based Ford product sold in the United States. That honor belongs to the 1988-1989 Mercury Tracer, which was based on the same Mazda 323 platform as the Capri and built in Mexico. Later on, the Tracer remained a member of the 323 chassis family but was a nearly identical twin to its Ford Escort sibling.

NHTSA and Ford investigating steering issues in Crown Vic, Grand Marquis and Marauder

There may be more steering woes for the Ford Crown Victoria. The National Highway Traffic Safety Administration has opened a preliminary evaluation into the Crown Vic and Mercury Grand Marquis from the 2004 to 2007 model years and the Mercury Marauder for the 2004 and 2005 model years because the steering shaft can jam. The issue could potentially affect an estimated 500,000 vehicles.
According to the regulator, there is a possibility that the driver's side heat shield for the exhaust manifold can rust, dislodge, and then wedge into the steering shaft. If this occurs, it leads to a situation where the driver can no longer control the car.
NHTSA has received five complaints of this happening, including one alleged case with an injury. In that situation, the car was driving onto the highway, lost control and rolled over. One occupant was hurt in the accident.